My HP 14-d010AU cannot detect wifi

Similar Questions

• Wireless driver uninstalled itself, computer laptop cannot detect WIFI

  My wireless driver seems to have uninstalled itself. The blue WIFI LED indicator does not illuminate either. How to reinstall the driver without the disc? Someone's done it before, but I don't know how, and they are no longer available to help.

  I found the solution. It turns out that the driver has not after all uninstalled at this time. I just went into the Device Manager, clicked on my card wireless network cards, you click on advanced, then antenna diversity and he went from auto to auxiliary voltage

  My computer is a dell 1520, and when I tried to turn the WIFI until I solved the problem happened everything he just said no detected network and the blue LED does not turn.

• Z370 cannot detect any wifi network to all the

  Hi, my ideapad z370 suddenly stopped detecting any wifi network. I know this isn't my wifi router that has the problem because my ipad can connect to wifi. any help? Thank you very much!

  Hi j1986,

  Welcome to the Forums.

  You can try the following:

  1. press Fn + F5 to activate the wireless card (make sure that the current status is set on "ON")

  

  2. relying on Fn + F5 is unable to turn the wireless status on, make sure that the physical wireless switch is on position ON.

  

  3. If the same problem, boot into the BIOS by pressing F2 at startup and make sure that the WLAN device is enabled.

  

  4. If you still cannot detect wifi networks, open Device Manager (press Windows key + R) and then:

  -Go to the ECS network

  -Right click on the wireless adapter and select uninstall

  -Right click on network adapters, then select Scan for hardware changes and check for availabel wifi networks

  5. If not, try to reposition the connectors wireless in the lower part of the PC (see page 42 of the HMM)

  

  Hope this helps

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• iPhone 6s cannot detect Canon camera wifi signal

  6 s iPhone, OS 9.3.2. This phone cannot detect any Canon EOS 6 d wifi signal after that I turned on the wifi of the camera. My previous phone iPhone 6 has been able to detect it.

  You can try the following steps

  On your Canon 6 d:

  1. go to WiFi settings

  2. turn on your Wifi

  3. go to the WiFI function

  4. Enter your nickname

  5. Select connect to the smartphone

  6. Choose mode camera access point

  7. Select easy connection and then you will get key SSID & encryption

  On your iPhone 6s:

  Download this app https://itunes.apple.com/us/app/eos-remote/id565839396?mt=8

  1. turn on your WiFi

  2. choose your camera WiFi

  3. Enter the password (the password = camera encryption key)

• HP Pavilion 14e016tx - cannot detect the WiFi connection

  My HP Pavilion 14e016tx (win 7, 64-bit, rt3290 ralink 802.11) does not detect WiFi connections. Sometimes it does not detect, but when I try to connect, it still shows the failure message ("windows could not connect to xxxxx & quot.") No idea how to solve this problem? Update the driver or solutions?
  
  Any kind of suggestions are appreciated! Thank you.

  Hello:

  I don't know which driver you used, but you can get the latest being for this map directly from Mediatek (Ralink) below:

  PCIe (RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)

  15/04/2014

  V5.0.46.0

  Win7 32/64 Win8 32/64 Win8.1 32/64

• Satellite L300D cannot detect the wireless printer

  Bought an advent AW10 wireless printer that is connected to my router from sky.
  The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

  Does anyone have other ideas?

  The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

  Hello

  Have you turned on the WiFi on the laptop Toshiba successfully?
  You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• Pavilion G4-2029wm (AMD, Win 7 x 64): cannot detect some drivers after installing Win 7 Home Premium

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  Ongto wrote:

  Dear supporter.

  I try to install Win 7 Home Premium X 64 on HP Pavilion G4-2029wm.

  After the installation is complete, Windows cannot detect some drivers, inclucde: USB (USB universal..), Wifi, LAN,...

  Plz help me solved this problem.

  Thanks & best regards,

  If you installed the Windows operating system without using the HP recovery media, then you will need to download and install all the drivers missing/software separately.

  Here is the link to the download page for your laptop: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5273741

• My office wireless icon is x'd - cannot detect wireless networks.

  My computer screen suddenly went black this evening - the monitor was still, the fans were still humming, but it was totally insensitive.

  I forced a stop, and when I rebooted the computer, my wireless icon has been x'd out. My computer cannot detect wireless networks (there are a half-dozen or more in my building). I tried a good stop and restart, but the problem was still there.

  The Network Diagnostics tool told me to check the router, so I did--but all other devices in the House are connected very well. I thought it would be a malware, so I ran a MalwareBytes scan, which turned up nothing. Then I reinstalled the drivers from the card WLAN - no luck there.

  System Restore has not solved the problem. ipconfig says "media state: disconnected ' for my WIFI adapter, but I don't know how to fix this. In the devices, the Broadcom WLAN card Manager, he says "this device is functioning correctly.

  I work from home, so it is important that I can access my wireless. Help, please!

  Hello

  I imagine the inconvenience that you are experiencing.

  1. What is the brand and model of the computer network adapter?

  2. This error message with him modeling icon?

  3. do you have a code error message when you try to connect to the internet?

  Here are some steps you can follow to resolve the problem:

  Step 1:

  Check if the network adapter is enabled, if not, please go ahead and enable the network adapter. Please follow the steps:

  a. open network connections by clicking the Start button, then Control Panel. In the search box, type adapterand then, under center network and sharing, click view network connections.

  b. right click on the network card and do one of the following:

  -To disable the network adapter, click disable. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  -To enable the network adapter, click Activate. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-a-network-adapter

  Step 2:

  Try to reset the TCP/IP settings:

  Reference:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357/en-us

  Step 3:

  Flush the DNS and request a new IP address of your ISP server by following these steps.a. Click Start
  b. click on run
  (c) in the Run dialog box type cmd.exe and click OK
  d. in the command prompt, type the following.e. ENTER after each new line.
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew
  output

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• cannot detect external display

  I updated the BIOS of my laptop HP Envy 2 months ago automatic update of HP. After that, it cannot detect the external moniitor. Rather the external screen shows "No Signal." for once and not display more. I tested the external monitor and a HDMI cable using another computer laptop and found works well. Help, please.

  I downloaded the latest update of the BIOS on the HP support site and installed. Problem solved - external monitor works.

• Windows Media Center - why it cannot detect TV?

  I used Qosmioplayer and it detects the TV from my Sky Digibox very well signal. However, I would like to record TV with my laptop and when I try to set up the TV using Windows Media Center, it cannot detect anything. I tried every possible permutation and the manual does not give pointers...

  Why the Qosmiplayer works for the entrance to Sky TV, but not the media library?

  Please help it's driving me crazy!

  I assume you are using a lead of areal coaxial standard to connect to your sky box? If so, you need to know which way the sky is coming in the. To do this, use the Qomsio drive to search for channels and when it detects the signal from Sky, it will tell you which way it is passed on. Something like channel 36. OK, now you have this information, start the machine and go into Media Center. You must manually add this channel. As Media center works with the EPG, all channels such as the skyinput must be added.

  So, in the main menu, go to

  Settings > TV > Guide > add missing channels > add channel

  Now enter the channel name you want displayed when viewing. IE SKY.

  Now you enter the channel number 36 IE that you got the Qosmio engine. This will now be held on the next available channel. IE 6/7/8 etc. Everything do you now is go to the channel and it appears at the entrance to heaven.

  Hope this helps

• Re: Satellite A200-1Z3 - LAN cannot detect anything

  Hi, I have a problem with my Lan port

  When I connected the lan cable only 1 light turn on and my system (Windows 7 Ultimate and Linux Ubuntu 11.04) cannot detect anything. Cable works at my book of fathers, but I have a problem, starting after that when I gived computer Service Center, I haved some problem with hard drive. Now, I don't have a warranty.

  How can I solve this problem?

  Toshiba satellite A200-1Z3 PSAE3E

  Thank you...

  Hello

  If the green light of LAN port lights if a cable is connected to the port LAN work physically so I doubt s faulty.

  The network adapter is in the Device Manager correctly and have you tried a driver update?

  Have you tested this situation on the factory settings?

• Cannot detect the webcam

  Hello, I have been using this machine for the past three years on Skype and video chat worked well. All of a sudden it says it cannot detect a webcam (its a webcam integrated), but I have used other sites to make sure that it works. I have closed Skype and restarted it and many other things. What can I do? It is the only way of me and my fiance can meet that I need a quick fix.

  bkeller1451 wrote:
  

  Dxdiag

  I suggest to try with the older version of Skype 6.14.0.104.

  Uninstall the version 6.16 and install the 6.14.0.104 version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi