my hp c1580 does not print in any color but yellow

Similar Questions

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• I have a premeium 6700 officejet that printer will not print if ANY color cartridge is low or empty.

  I have an Officejet 6700 Premium printer e all-in-one.  I can not print if ANY color cartridge is low or empty and black is full, and I want to print something that uses black ink.  Is this what can I do to print in black only without replacing color cartridges when they are not needed for the print job? Still, I can't make any impression unless all color cartridges are not low or empty.

  Hello

  I recommend taking a look at the following document, including the section "How to print with Black Ink Only":

  http://support.HP.com/us-en/document/c03746188

• Does not print black, single color

  Printer does not print or copy in color.

  Do not print or copy in black.

  Uninstalled and reinstalled printer program. No help.

  Machine unplugged and replugged. No help.

  Change cartridges. No help.

  Any suggestions

  Remoman wrote:

  I have a HP All In One 410C series. Serial number [deleted for privacy reasons].

  I can print color but not black.

  Can you help me? Thank you.

  I want to help you to be able to print again. I understand your color cartridges work, but it's not black ink.  Please start with the procedure described in the following document; The problems of quality of printing to the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e)

  If you have performed all the steps in the document above and the problem persists, not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest that if the printhead and the printer he are out of warranty.  Hot water rinse printhead - HP ink printers of the series with removable head.

  I have recommended this solution to others and have been successful, but I can't guarantee that this will solve the problem, it is a term of type line of effort. I hope it helps.

  PaganC wrote:

• HP photosmart 210 does not print black one color print

  I tried to replace the two times-same problem black print cartridge.

  Document here can help solve the black does not print printer Photosmart b210.  If the first four solutions do not resolve the problem of the post here can help.

• DeskJet F4480: full black print cartridge still does not print black. Colors OK.

  What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.

  And... Here is the solution.

  Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.

  The black cartridge has been blocked. The way of difficulty is:

  1. remove the faulty cartridge from the printer.

  2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.

  3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).

  4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).

  5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).

  You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.

• 8500 A909a does not print in "black" when it yellow. It is color of ink required to print everything?

  Printer all-in-one HP Officejet Pro 8500 - A909a using Windows 7. The error message is "yellow", but the settings are to print in "black". The printer only works if all inks are operational or is it possible to print with only black ink?

  Even if the unit is configured to print in black ink only requires that all cartridges is available. This is to avoid the printer itself.

  Thus, the printer uses small amounts of color under black ink ink to keep ports in the filled fresh ink print head. This is part of the method that the unit integrated does not damage the printer by allowing the ink to dry in the ports of the print head. Also, this improves the black ink on the slipway of the page and have true black color we're used to seeing in print.

  I hope this helps.

• Photosmart 6520: Photosmart 6520 does not print the new colors yellow, magenta and cyan

  I installed new cartridges 364 original color and now the printer prints everything in black and white only.

  Before replacing the cartridges I printed black and white stuff (because the cartridges were low).

  I have installed new drivers, it off for a minute, restarted.
  I cleaned up and align the cartridges.

  White are not dry, as I tested al with tissue.

  All of this happened less than a month after the expiration of the warranty.

  In properties, grayscale printing is turned off.

  What could be the problem?

  Well - he started working by itself after some 5 to 6 hours. All tests and diagnoses before that said nothing wrong, but the colors were simply not print at all. Then, as this, the print quality diagnostics showed color.

  In http://support.hp.com/us-en/document/c03318187 step 2 tips you allow auto maintenance to complete. I suggest now just let it meditate and heal itself and do not even try the other troubleshooting steps discount. However, the few hours suggested could be more than a little. I've almost exhausted my black cartridge when running all the other tests and diagnostics, and now I'm waiting for a new... Once I get it, I'll put it in, and then let the sit of the printer for 4 to 6 hours just to settle. I hope that's enough. And then, finally, I might be able to print my document.

  Would be nice, if this problem was mentioned in the cartridge installation instructions.

• Does not print the magenta color; HP 2575 All in One Photosmart

  Installation HP2575 on another PC with 8.1 Windows 64-Bit operating system.  After installing new printer cartridges have been installed, print heads were clean and aligned and even Magenta will not print.

  Take a look at the diagnostic test page.  Colors have lines through them, and the depth of the colors are not what they should be. We did change color saturation temperature and do not have an increase in the saturation of Magenta.

  What else should I consider troubleshooting?

  Alchohal Publix swabs to clean electrical contacts and the nozzles on the printer cartridges. Also cleaned the contact electric coupling on the printer.

  EVERYTHING WORKS FINE NOW!

• MY more than 8600 HPOfficejet Pro does not print on any e-mail. I added the printer e-catalog, one

  I use a HP Officejet 8600 pro, I am running Windows 7 64 bit.  I have no error message when I send the e-mail, it just never happens.  My e-mail program (link century Mail) indicates that the message has been sent correctly.  This is a new printer, and I think that it is put in the right seat.  It prints correctly on my email address and I added in e print, but still nothing. I missed a step somewhere?

  Hello dnulgoks,

  The error message that you normally receive with the "550 5.7.1" means the area of the address you send from is rejected by ePrint servers because it appears to be spam. This can happen due to a few reasons, but the best way to work around this problem is usually just to use a different email address.  Here is a link to another thread with the same question and some suggestions for resolution:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/550-5-7-1-command-rejected/m-p/424837#M1943

• place of the bridge does not work on any layer but above

  When you place an image of the bridge in Illustrator CC, he will ONLY put on the first layer.  If it's locked... it does nothing.  y at - there no way to target the layer that you want to place the image on?  If this isn't the case, it is a limitation not to say stupid.  Please tell me I'm missing something.

  
  

  Thank you.

  Or use drag-and - drop from the bridge to a selected layer.

• Photosmart HP 7510: Single color does not print

  Hello

  Does not print the magenta color. I put a new cartridge in (both are new and not expired).

  As requested by another post on this page, I have cleaned the contacts on the cartridge and printer with clear water. Did not help.

  I ran a printed report that says in the text that all is well, but the magenta is very slightly ridged (so not quite Miss).

  One of the ideas for what I can try next? Appreciate any help you can offer.

  THX!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• Printer installation problem. Watch is printers and fax machines, but does not print

  I had to move my printers due to a collapse of the motherboard.   I moved my HP DeskJet 710C from a computer (under XP SP3, through LPT1:, where he was part of a network home and works very well) to another computer, also under XP SP3 on the same network, but who doesn't have a printer port.   I replace the cable with a USB printer and I tried to install if via a port USB001 printer.   The machine seems to install the printer (manually - it is not automatically find) and it shows in the printers and Faxes folder.   However, it does not print.   Any document disappears into the other, is not listed as a document to print, but it does not reach the printer.    I did everything I can find listed on the HP web site and run the FixIt program nothing works.   A search for network printers, are looking for a printer, provides a list, of which some are listed as invalid.   I think that I had uninstalled to printers to my computer until I tried to install this printer.   Now, I wonder if these "invalid" entries are mucking up of my installation.   How can I remove 'Invalid printer' names in my list of installed printers.   It seems in any simple way.

  I have my sure others must have had similar problems, but I can't find it on the net.

  Any help would be welcome.

  Thank you

  writing in the new message: * e-mail address is removed from the privacy... *

  Thank you, Tom,.

  I have found no useful HP support. They seem to only want to buy a new printer, but if I can't install my old I'll be able to install a new one? Or > when you think that you download using them, you actually download scanning for the third-party driver software, which has then finds all kinds of driver problems > and wants you to pay to get them replaced or updated.

  This isn't HP; That's the scammers try to sell you anything for an exorbitant price.

  As the computer receives automatic updates from Microsoft and works well otherwise, I do not trust software that detects problems everywhere in my machine. Or am I > stupid? Or is it driver/driver scanner software update that you can trust?

  Most of the pilot sites is not trustworthy. I used Device Doctor and found useful. There no drivers to download IIRC; It just tells you that drivers must update and where to find them. Here is an article on this subject (and no, that Thomas is not me):
  http://mintywhite.com/software-reviews/maintenance-software/device-doctor-totally-free/

  I'm still a little worried about 'Invalid printer' entries in my system network and feel that if I could get rid of them, I could make progress. When I try > print (via USB connection) my wireless network camera flashes with enthusiasm, typical activity out via the wireless network. The file is certainly went > somewhere, because it is more listed as a document to print.

  What printer you put as a default? This should be where the printed document (Word of the device - expected :-)).

  SC Tom

• Brothers HL 2040 printer does not print on Windows 7/64

  Visited site of brothers and downloaded updated drivers, but still does not print. Any ideas? Winniethepooh

  Hi Winnie,

  Please contact Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you try to print? If Yes, what is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  Check out the link for the printer drivers:

  http://www.brother-USA.com/downloads/default.aspx?PgId=1&R3ModelID=HL2040

  Method 2:

  I also suggest you to refer to article and check if that helps:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• T620: Hp Designjet T620 does not print Yellow

  Hello.

  My HP Designjet T620 does not print the cartridge and the yellow, it is full.

  Can someone help me?

  Thank you!

  Hello

  You may have a problem with a print head

  Look at the following documentation

  Print quality troubleshooting, look for 'The Image Print Diagnostics'

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01095699

  Remove a printhead

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01096728