My HP Deskjet F2480 solutions Center. CAN; Open t, no icons. Download the msg of error.

Similar Questions

• Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

  Hello

  My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

  Now the solution Center can not find my printer on the LAN.

  • I can connect to the printer via its IP address and see all the information about the printer and scan
  • Printing and scanning doctor can find the printer
  • Windows can see the printer and print

  But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

  I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

  I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

  Any suggestions?

  Concerning

  Hello

  Published on the website of HP software seem to be evil and not one used for your printer.

  I have notified HP to get this fixed number

  Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

  Finally download and install the following software, it's good:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  See you soon,.

  Shlomi

• Fatal error during installation of HP Deskjet F2180 Solution Center

  Hello world!

  During the installation of the HP Deskjet F2180 Solution Center, it says "fatal error" - couldn t write the key to '\SOFTWARE' more 'MSI '. GPBaseService2"error.

  I tried several times to completely uninstall all this software and remove the key in regedit and reinstall it. I have also respected the order: first install, after that connect printer. HP Digital Imagiing monitor works but not enough iťs for me. Maybe there is a problem with permissions in Windows, who knows. I just installed Windows 7 Professional 32-bit.

  Could you help me to solve it, please? Each response pleases!

  Hello!

  I have solve it without help. A few key registry could not be written in \SOFTWARE, so I set the permission to write to this folder in regedit and it works!

• HP solutions Center can not run because my series D110 printer AIO installation is not complete

  HP solutions Center can not run because my series D110 printer AIO installation is not finished? Please help me solve this problem! Thank you very much!!!

  Hello, I'm sorry you have a problem with your solution center. You can uninstall and reinstall the drivers and full software features.

  This should solve your problem. Here is a link that can help you to download the drivers. Make sure that it is FULL of FEATURES software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4023246#n212

  Choose your operating system, and then click NEXT.

  Let me know if it helps.

• Photosmart C4795: Solution Center cannot run because your installation of the device is not complete

  Months after HP software reload to correct a mistake, I lost my HP Solution Center during installation.

  Today, I ran the utility HP Print and Scan doctor and downloaded the software to install the HP Solution Center, but the following error message:

  HP solutions Center can not run because your device installation is not complete.

  I want to set up a wireless printer connection.

  Appreciate your help.

  Jean,

  It was quite a process, but everything seems to work well!

  I just rebooted my laptop, and now I have the HP Solution Center!

  The error message that I mentioned in my previous note seems to have disappeared (I hope never to reappear!).

  The question that light that I see is that the HP Support Assistant is always located on my taskbar.  How can I get rid of this?

  I can't thank you enough, John, for all your help and advice!

• I can't find my icon of the Game Center app on my iPhone.

  I can't find my icon of the Game Center app on my iPhone.

  I not even looked in the search.

  I have an iPhone 6s and iOS 10.0.2.

  GameCenter has been removed since iOS 10

  Here's what you can delete Apple in iOS 10 btw

  Delete apps Apple integrated from the home screen on your device iOS with iOS 10 - Apple Support

• __lost my photo of microsoft program when I tried to download the upgrade essentials - error loading C\program can windows live \photo gallery\WLXphoto Gallery\WLXPhotoViewer.dll

  Original title: __lost my microsoft photo program when I tried to download the upgrade to essentials

  I tried to download the new update essentials download and three quarters of the way through, he stopped.
  The download was already about this. He said then; "put everything back as it was" when he did. I have
  lost my photo program. It now gives you a nag screen which keeps comeing like:

  Error loading C\program can windows live \photo gallery\WLXphoto Gallery\
  WLXPhotoViewer.dll
                            
  The system cannot find message for message number 0 X %1 in the message file

  0 x %2

  In addition, whenever I boot, the screen shows: "ready to download microsoft essentials" restoration is not
  the ride.

  After starting, the system leaves me alone until I try to open a j - peg or some file im trying to open.
  then the cycle starts again. further investigation, saying that I lost a dll.

  I tried to find microsoft photo viewer download to try to repair the photo of microsoft program and concluded that the
  only way I can do that is by downloading the essential upgrade download because it is attached to it.
  In order to accept the upgrade, the photo program should probably be repaired, as a thought as microsoft solve this Center says there is no problem. all other articles on the net is also not related or doesnot show how to fix the missing dll if it is the problem.

  Hello captain_crunch0,

  In addition to the steps proposed by Ajay, you could try and download and reinstall all Windows Live Photo Gallery 2011.
  This link should be just for the photo gallery. http://explore.live.com/Windows-Live-Photo-Gallery?OS=other

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can not find bluetooth icon and the device on my laptop

  I can't find bluetooth icon and the device on my laptop - HP550 - Windows XP, so not able to connect all devices.
  Even I checked the Bluetooth Services on my PC by method "services.msc", but I can't find bluetooth written on the list.

  Please help me because I want to transfer files via bluetooth.

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. have there been recent changes to the computer before the show?

  2. you get any error message?

  Please go ahead and consult the methods mentioned below and later a update on the State of the question.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Troubleshooting Wireless and Bluetooth problems.  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Method 3: How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  For your reference: How to install and configure Bluetooth devices in Windows XP Service Pack 2: http://support.microsoft.com/kb/883259

  Follow these recommended steps and after if you still experience the problem.

• I can't drop my icons on the desktop next to the Start button. My 'elements of the locked office' is disabled, and "auto arrange" is unchecked. What can I do so that he abandoned the ions next to the Start button?

  I can't drop my icons on the desktop next to the Start button. My 'elements of the locked office' is disabled, and "auto arrange" is unchecked. What can I do so that he abandoned the ions next to the Start button?

  Hi richardcollis,

  You did changes to the computer before this problem?

  You try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Hope the helps of information.

  Please post back and we do know.

• How can I change an icon for the device in Windows 7?

  How can I change an icon for the device in Windows 7?

  In 'Control Panel\Devices and printers' I want to change the icon of a device that there are listed.

  Hi Dave Tavres

  I'm afraid to say that you would not be able to change this icon.
  This icon is provided by the hardware manufacturer, and is included in the drivers and architecture has no Windows allows to change this information.
  However, you can use the third party applications to change. Use your favorite search engine to find on the Internet.

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I download adobe on my desk? I bought adobe photoshop, but where can I I like to download the

  How can I download adobe on my desk? I bought adobe photoshop, but where can I I like to download the

  Have you tried to download link below?

  Download Photoshop Elements | 10, 12, 14, 11, 13

• I can't get online to download the update of cloud Cleative 2015. What can I do?

  I can't get online to download the update of cloud Cleative 2015. What can I do?

  I think that you have found the "download error" in the Apps Panel.

  Please check the help below document:

  Download error in the applications tab of Creative Cloud Desktop Application

  You can also view the threads below:

  https://forums.Adobe.com/thread/1832357

  Persistent Cloud error - error download - creative

  Re: Creative Cloud "Download error" message

• I can't download the new update - error code: 43

  I can't download the new update - error code: 43 - what does it means?

  I had the same problem.

  I downloaded the new CC desktop application directly here:

  https://creative.Adobe.com/products/creative-cloud

  Hope this helps

• HP deskjet hp Solution Center 1051

  I am trying to print envelopes and my printer prints off images on the side. I know not how to solve the problem, but unfortunately so do I need to go to "HP solutions Center" and I have not installed on my computer. I'm running on Windows 7 and that you have installed the full download of features for my printer. How to center of HP solutions now because it did not come with my install?

  Hey,.

  These options, if they are available in the driver for the Deskjet 1051, are accessible without having to go through the solution Center.

  • Click the start menu on Windows 7 PC
  
  
  • Select the devices and printers
  
  
  • Right-click on the Deskjet 1051 installed
  
  
  • Select print options
  
  
  • Select the paper/quality tab or similar (I don't have this printer available to perform a test installation and view options)
  
  
  • Look for an option similar to the one mentioned by Praveen_David custom paper size

  If these options are not available in this section, you may need to use another driver with the option for custom paper sizes.  Research on the product specifications page, I found that the printer uses PCL3 GUI for printing language.  This means the Deskjet 9800 driver built-in to Windows Update will be compatible with the Deskjet 1051.  Deskjet 9800 driver has built in custom paper size options.

  Click here to access a thread with information on how to exchange for a different driver such as the Deskjet 9800 driver.

  Let me know how it goes.

• HP solutions Center can not scan, scan to preview works nor, error code 4, [(3,42,0)]?

  HP Elitebook p 8460, business management Win 7 (64).

  All-in-one, HP Officejet 5610 (no initials).

  5610 works properly, it can scan via buttons, copy via buttons, can be used as a printer with no problems.

  Center solutions HP see the 5610, reads ink levels, seems to work ok for everthing BUT sweep.

  HP Soltuon Center starts scan, guests to the default values, once selected all hae, he proceeds, the 5610 appears to be scanning (I hear it move scanner) but the software does not.

  The scan preview window appears but is a smaller rectangle and cannot be resived or even not selected, no menu drop downs seems to work.

  After 30 seconds or more, the error message appears, a yellow triangle with "!" in it...

  reading...

  An error has occurred in the scanner software.  Try the following steps.  After each step, try to scan the image... then reboot, restart, reinstall... tried all, same error.

  Raise the HP printer and Scanner Utility Dr, he ran, he said I need an update, installed the update, revived 'Dr', he said everything was fine (past all the test), test analysis resulted in the same error.

  I never had this on Win XP, but I was never able to make it work under Win 7 on this computer.

  In fact, I had forgotten I had recorded this problem (from September last year).

  I tested the scan function again and it seems to work fine.  I does no change, but this does not mean that I have no updates that may have solved the problem.

  Solution Center still does not show ink levels, but by going to the printer Kit, ink level estimates are displayed (possible solution).

  Please consider this problem solved for me.