My imac restart after safari updated 20/01/2016

Similar Questions

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Disable the auto restart after auto update

  I can't express how frustrating, it is at the foot of two hours of hits for a drink, to return to my job cancelled by an automatic restart after Windows update. This kind of thing has happened several times. And as I have a Vista Home Premium, I did not have access to group policy to turn off. So guys, how to prevent windows to lose more of my work with its seedy characteristics? Thanks in advance.

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  «Using Windows Update in Windows Vista»

  Change how it gives you the updated to: ' check for updates but let me choose etc "> etc.". "

  See you soon.

  Mick Murphy - Microsoft partner

• iMac restarts after the first start since 10.11.6

  Hello

  Since updating to OS X 10.11.6 my mid 2010 27 "iMac (iMac11, 3) restarts after a few minutes of availability.

  It happens right after a few seconds.

  The screen goes black, and then it displays this message. After the reboot, everything works fine.

  

  Please post a report of EtreCheck of your system if you can get it to boot. Then we can consider for obvious questions that may be causing your problem.

  A cause can be if you have any antivirus, cleanup or third-party maintenance utilities installed. Do you have?

• iMac restarts after sleep

  Problems lately with my iMac 27 "5 K. After putting to sleep, it is restarts after about 2 hours.  If I wake up it before that date, it is usually very good. But after 2 hours, it restarts. Sometimes, I find it just be stopped. Most of the time when it restarts itself, it crashes with this gray bar filled about 80% progress.  I have reset the PRAM and EMS, checked all the settings in power management (not set to restart after power failure for example).

  Another problem I 'bypassed' which may or may not be related (I'm including in case it is related) is that on El Capitan, my magic trackpad would randomly wake the iMac.  I had to disable the option to allow devices BT wake up the Mac. When I upgraded to Sierra, the iMac still wake up randomly due to an event of BT. After a lot of trial and error, activate the option "allow bluetooth to computer devices" back prevented the wake-ups at random and let me wake up the computer again deliberately with the trackpad.  Very strange.

  In any case, I'm usually pretty ingenious to resolve this sort of thing myself, but the Console to Sierra news is terrible. Or maybe it's the system logs that are terrible, because I can't find anything about the causes of previous judgment that might provide a clue as to what is happening here.

  So, any advice on how to solve the problem or at least to determine the causes of the previous stop would be greatly appreciated!

  Other information that might be relevant:

  Wired devices:

  USB: 2 external HDs (a WD and a Seagate) for backups TM

  Apple keyboard

  Thunderbolt: 27 "Thunderbolt Display (Apple)

  It's a DVD-ROM of Apple and a trendy optical audio dongle, both

  All 3rd party extensions you are running?

  EtreCheck is a simple little app to display the important details of your system configuration and allows you to copy this information to the Clipboard. It is intended to be used with Apple Support communities to help people to help you with your Mac.

  http://www.etresoft.com/ etrecheck

• STOP 0X7E and rolling restart after Windows update

  Hello

  My apologies if this has been covered before.  I did a search and have not seen this covered.

  I'm working on HP zv6000 laptop computer a parent with Windows XP Home Edition.  I do not have the recovery disks that may have come with it, and there is no recovery/repair hard disk partition.  Sometime in early January, after a reboot due to the installation of the updates of Windows, he went in a rolling start scenario.  After several attempts, I got to the screen automatic reboot temporarily disabled and advanced boot options.  The error it gives is:

  STOP 0x0000007E (0xC0000005, 0x89891E7A, 0xF78DA7B0, 0xF78DA4C) parameters with.  No module name is given after the error message.

  The laptop does not start in safe mode.  It restarts after loading mup.sys.  I don't know which module occurs after that in the boot sequence, which told me a lot.

  I suspect a driver issue, but do not know how to proceed from here.  I can get into the recovery console via a XP Pro CD and can start with a BartPE disk.

  Can I turn off the drivers of one of these means?  If so, how do you identify which those who have been installed around January 9?   Once identified, is debilitating as simple as move or rename the driver file?

  Thanks for your suggestions!

  All,

  The problem has been resolved by doing a repair of the Home CD from the manufacturer of the Windows XP installation.  It restored the laptop to XP SP2 status.  I installed the SP3 and later updates, but refused to install 3 updates of pilot.  Everything seems to work OK.

• Cannot restart after the update of XP last night (08/13/09)

  Power the computer off last night, he said "stop after installing updates", so I just left the office.
  Is here this morning, the computer will not re-start in safe mode or safe mode with command prompt.
  I get the "Sorry for the inconvenience" screen
  A ran a chkdsk and rebuild bootcfg
  When I try to start in safe mode, it seems to load takes with several lines of things like:
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\ntoskrnl.exe ' etc, etc.
  then hangs just at a black screen with the last few lines of that on it.
  I can get start menu with f8, I can run the retore console, but I can't get a safe mode prompt to try a system restore from there.
  HELP, I'm stuck.

  And Yes, I know it's a Questionmark XP a Vista forum, but I can't find the XP forum.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  Link above is for the focus group you need.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Management of the problems after the update 27/01/2016 of the files

  I edit in PS after LR on most files.

  I often put feathers masks extremely on in my files.

  Everything was fine until today, after the update.

  Now, after recording in PS go back to LR, LR watch preview masks also moulted hard lines.

  It does not resemble it in PS, as LR. And it exports with the hard lines of LR.

  I tried to update the previews, I toggled and saved with the layers on and outside. This is definitley the layers and it's certainly the way LR is their reading.

  Any ideas?

  Official Adobe Forum to report bugs:Photoshop community customer family

  Already, there may be a thread here on this issue. If so, you can add your vote. If this isn't the case, you can start your own.

  HAL

• iMac restarts after the osx update

  Hi my son has an iMac (mid-2011 Office), and there is an OSX update it will update, but then goes to a screen gray white and just sat there. I've left overnight and does not finish the installation and come back to life.

  I tried to reinstall the operating system via CMD R and I tried first aid on the hard drive.

  If I reinstall the iMac from the time machine backup recovers OK, but I can't get the updates of the OS on the machine.

  So my question is that someone has an idea what could be the cause?

  I contemplate wiping the HD and basically start again, but I have to reinstall MS Office and his Steam account

  Any advice would be welcome

  Your Modem may be loss of connection? Are you using Wifi?

• Older A1138 Office do not restart after software update?

  I have worked on an old Mac Office since last night, think that the owner said it is a model of A1138, do not see anything in the associated model anywhere on the unit. The OSX Snow Leopard loaded very well so I ran the software update, but after that he showed that is was downloaded and restarts, it seems being stuck at this time, should I shut down and restart or how much time should I wait please?

  Sorry to not give more details. Guy brought this machine for me yesterday. He said his tenant that moved did not have to take this very old and heavy machine for him, then the tenant given to him. The owner however gave him the unit without the disc hard OSX but hard left 2 discs in there for him. So, I loaded 10.6.3 original CD-ROM from Apple on this topic. I'm trying to upgrade from 6.3 to 6.8, but after he showed that the updates have been downloaded and restarts, it seems to be stuck at this time here with just the 'outer space and stars' screen purple color, should I shut down and restart or how much time should I wait please?

• MacBook Pro keeps restarting after iPhone updated 9.3.5

  Given that I didn't have at least a 50% load, I connected my iPhone 6 s to my MacBook Pro (10.11.6) updated the phone to v. 9.3.5. The phone updated fine, but now my Mac keeps on rebooting over and over again. The display shows the Apple logo and progress bar, but there are thin horizontal red lines across the entire screen. When the progress bar is full, the gray screen runs for about 10 seconds and then restarts, and it does the same thing again. I have absolutely no idea what to do. Can anyone help?

  Hello robbob116,

  Thank you for using communities of Apple Support.

  If I understand your message that after upgrading your iPhone 6s to iOS 9.3.5 via iTunes on your MacBook Pro, your MacBook Pro now repeatedly restarts. I know how it is important for your MacBook Pro start correctly for you. The first step I would recommend would be to start up your Mac in Mode without failure. The following article explains the use of Safe Mode and the steps that you will need:

  Try safe mode if your Mac does not end commissioning

  Best regards

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• Satellite L40 (PSL48E) - is not restart after BIOS update

  Hello

  My problem is that I have updated the BIOS and after that the machine does not restart. (Corrupt BIOS?)

  After that the BIOS updated (Satellite L40 PSL48E), reboot the machine and with the F2 key, I open the BIOS setup.
  I check the version of the BIOS (5.50) and complete the configuration of the BIOS. The machine must restart now...
  Not at all, the machine does not restart. No screen only the powerled lights.

  I can to fix it on my own as a BIOS reset?

  Thank you for the cooperation.

  It's strange because after that the updated BIOS update you can go into the BIOS.

  However, try to remove the battery and the AC adapter. Wait one hour and then put the battery back in and connect the AC adapter. Try again.

  If it doesn't work it is something wrong with the hardware or BIOS and must be checked by a technician for laptop.

• Continuous restart after installing updates on windows xp

  Hi, I have an Acer Netbook only a year and I installed the automatic Windows updates because my windows is original, so I thought that it would be no problem. The thing is that a few days before he installed the latest update and after the reboot to finish the installation she never windows again. He continues to send me a black screen where I can choose between:

  safe mode

  safe mode with networking

  safe mode with command prompt

  Start windows normally

  and it doesn't matter which I choose, it sends me a blue screen which last less than a second and it restarts again.

  I tried pressing F8 and more option appears, but each of them ends up with the same blue screen.

  My laptop is a netbook so I don - t have a CD drive on it for wondows stable once again, so please help me!

  
  

  Thank you very much!

  Hi marraqueta,.

  To disable the automatic restart in case of system error, follow these steps:
  

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  2. Select disables automatic system failure reboot when the Windows Advanced Options menu appears, and press ENTER.

  Subsequently, when a problem causes a blue screen of death or another major error that stops the system, the PC will automatically restart. It will be necessary to restart manually.

  A description of the options to start in Windows XP Mode: http://support.Microsoft.com/kb/315222

  Access the link below

  Black startup screen is briefly displayed and the computer restarts repeatedly when you try to start Windows XP

  http://support.Microsoft.com/kb/314466

  Run Chkdsk form the link given below

  Microsoft recommends that you use the Recovery Console only after safe mode and other startup options do not work.

  http://support.Microsoft.com/default.aspx/KB/307654

  Warning of Chkdsk.
   
  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  Aziz Nadeem - Microsoft Support

• system does not restart after the update?

  I downloaded an update to microsoft web view for my windows XP home Edition... it's KB9955759

  "After you download was finished, then I tried to restart my computer as it has been restarted I tried to say, log in under my user name, then a pop box brought up something like" windows cannot load the locally stored profile. Rights of possible insufficinet?

  I can't connect in safe mode but not in normal mode?

  any suggestions

  John

  If you start in Mode safe mode, uninstall KB955759 & reboot, the behavior persists?

  Despite what http://support.microsoft.com/kb/955759 suggests, KB955759 isn't a critical security update. After you have uninstalled KB955759, you can use the difficulty here to achieve the same ends, if you wish: http://support.microsoft.com/kb/954157 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft