My impressions of portable printer Officejet 10o to the point 2 or 4 dimension type, UNREADABLE...

Similar Questions

• HP Officejet 4620: portable printer communicates only with the computer

  Last home had this printer set up under the name of wireless. lost connection cables so had to buy a new one. Printer goes and copies, scans, etc. Have unplugged, said prayers, and still it wont connect. Just bought new cartridges so you don't want to throw it out the window right away!

  Document is the printer online. Mark Exclamination (troubleshooting) appears on the printer control panel

  Hi @chaloupay,

  I'd love to help you with your Officejet 4620! Thank you for taking the time to post in the Forums of HP.

  I understand that you were able to print until recently, and now you see an exclamation point on the screen of the printer. Performing printing and Scan doctor could help. HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find that the key and the box are both in a green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

Please let me know if that solves the problem, or if you need assistance. In fact, if this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.

Thanks, I look forward to hearing back on your part.

• Portable printer Officejet 100

  We Macbook air and macbook pro operating system is os x 10.8.2 I downloaded the drivers, but can't get them to work. I hate printers why can't they work? I have an eveny at home.  I should have make it help please.

  Yes, this printer is compatible with the 10.8, however, there is no separate software, just the built-in drivers as linked to more.

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.

• Printer Officejet 6500 misses the beginning of photography on thick photo paper

  I have an all-in-one officejet 6500 (E709a). My office is running Win7. I felt for a year or two and initially he printed on paper photo well, but he does NO more.

  I use a kirkland photo paper, professional glossy inkjet paper, and it says on the box of paper in that it is 69 lb 255 g/m2, 10.4 mil 8.5x11. From what I could read in the HP specifications, 255 g/m2 is supported (I think I saw it supports up to 260 or above), but has not seen a specification for the thickness. In any case, at the beginning, when it was new - it worked. Now, it's bad causign.

  \When I print a pidcture, say printing full page and I remplir fill in the printer menu, select "printing photos with white frame" the size of the paper, mentio0n it of "another photo book" and ask for the 'best' quality, and I put a (also tried to put more) page, sometimes it won't pull the paper in all, and sometimes it starts pulling on the paper after the head already done a few scans which means that the image loses almost a full inch of his debut.

  What can I do? of course, work with plain paper I have no problem, and if I go to 'best' to normal, my success rate is improving but is still far from perfect.

  Y at - it cleaning to do? some rolls must be replaced? or what? It is VERY frustrating that the printer cannot handle these quality papers as it should!

  Help...

  Thank you

  Arik

  Try troublshoooting not on this page.

• Printer Officejet 6100 - Download the software

  I can not load the software for the new printer.  Driver CD, appears to download, but then I get nothing - no prompt or anything.  Then, I tried to download the software from the interenet.  Get about 99% of fact and I get an error message that the download was interrupted.  I'm back, it restarts and I get the same message again and again.  Windows Vista.  Help!

  Hello

  Please perform the procedure that could solve the problem below.

  1 > if the CD is not autorun, and then click START > COMPUTER > double click on the CD drive (which would have a HP logo). Locate the setup.exe file and double-click it. Installation should start up.

  2 > if step 1 does not work, turn on the printer. Connect the printer and the computer with a USB cable. Then try the below mentioned steps which allows you to print would set.

  follow the steps below...

  Click START > search for programs and files, type PRINTERS and click the pop list > a printer window would be open. > click on add a printer > add a local printer >

  (if the printer is connected with USB)

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Great printer Officejet 7500 a Format to connect intermittently to the computer via the wireless network

  I have a portable printer Officejet 7500 has recently purchased that I would use wireless.  I have an Apple wireless router and am running Windows 7 on my computer.  The printer and computers individually connect to the network, and there is no problem with the router.  The problem is with the connection between the computer and the printer.  I can print things from my computer by sending a file to the printer, but sometimes it works through printing directly from the software.  I tried to scan my computer and the printer, but get the same error at the same time that there is no communication between the printer and the computer.  I suspect that it is a firewall problem, but do not know how to change the settings to allow this communication to occur.  I have the windows firewall and advanced software protective system, but have disabled the windows shield in this software.  Help?

  First of all, download and run this utility:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/printer_diag/&lang=en&softwareitem=oj-106151-2

  What did he say?

  Just to be clear, that the 7500 a is connected to the Airport via radio, correct (not USB)?

  If so, we will define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

• portable printer HP officejet 100

  Portable printer HP Officejet 100 has all the flashing lights on his Panel.  And I can't print.  Cannot close the printer is down. Troubleshooting and received the message that no problems detected. Any suggestions?

  Hello TNMom58

  Here are the steps that must solve the problem for "All the lights flashing" - (including your suggestion :-))

  1. Unplug the power cord from the back of the unit and the wall outlet. Unplug the USB cable.
  2. Remove the backup battery.
  3. Wait 1 minute.
  4. Install the backup battery. Connect the power cord to the wall on Let's then to the printer.  The printer must turns on automatically, if the printer does not Power On, then press the power button.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• HP OfficeJet 4650: HP utility does not connect to my new portable printer HP OfficeJet 4650 of my connected USB MAC

  Utility HP does not connect to my new HP OfficeJet 4650 of my Mac connected usb portable printer.  I have to turn off the printer, printer and try again sometimes that works.

  Welcome @grizley1967.

  Thanks to their participation in Forums of HP! I see by your post that the HP utility connects to the printer. I will definitely do my best to help you.

  Make sure that the printer is connected directly to the Mac with the USB cable.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Select the startup disk in the list of volumes.

  Click the first aid tab.

  To verify permissions, click on verify disk permissions. To fix the permissions, click on repair disk permissions.

  Restart the computer.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Portable printer all-in-one HP Officejet t45xi

  Does anyone know which driver I should use to get the printer to work? I know it's a twisted scenerio that must occur.

  Portable printer all-in-one HP Officejet t45xi and windows 7.

  HP have drivers nor does not endorse the printer T45XI with Windows 7:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796774&cc=us&dest_page=softwareCategory&DLC=en&LC=en&OS=20&product=60036&tool=softwareCategory

  If the manufacturers website has no drivers for Windows 7, try to use Windows Update to install the printer drivers:

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Try the printer Troubleshooter

  1. click the Start button, then click on Control Panel

  2. in the search box, type troubleshooting

  3. then click on troubleshooting

  4. under hardware and sound, click "use a printer.

• Portable printer all-in-one HP Officejet g85

  Windows 7, 64-bit system. Trying to print photos stored on my HP Officejet G85 printer, it starts to print then remains in the same place on the photo to print paper until the pictuer should be done. It only prints in the first inch of the photo paper.

  Print & done every thing else very well. Just problem print photos stored image file.

  HP said no new driver for Windows 7, 64 bit.

  Same printer was used before the previous computer with Windows Xp with a problem.

  What is my problem?

  Thanks, Frank

  Hi Frank,.

  ·         Have you tried to change the location and then try to print?

  Method 1: Change the location of the images and check if it prints very well.

  Method 2: Follow the guide for troubleshooting by HP and see if it helps.

  HP Officejet g85 all-in - One Printer series - print quality problems

  You can contact HP for support

• HP Officejet 4630 portable printer: HP Officejet 4630 printer does not print until the computer is restarted

  When I send a document to the printer; It shows in the print queue, but does not print.  When I restart my computer, the document will print.

  The same thing happens whenever I have send a document to the printer.  I have a WiFi connection from my laptop to the printer.  The blue icon on the printer lights indicating that plugged.

  Why does only work when the computer is restarted?  I ran the HP Support Assistant, and it does not find the printer; even if the printer seems to find the computer once I restarted the computer.

  It's embarrassing to say and I'm not very technical interest.  Any suggestions will be greatly appreciated.

  Hi @Maggie78

  Thank you for your patience.

  You can try the following:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• Print Officejet 6000 occupies more of the page when printing duplex

  My printer is set by default to duplex print. Whenever I use my 6000 Officejet to print two-sided document printing starts just below it should be at the bottom of this page which he finished much lower than when printing a single page (from the same document).

  For example: if I choose to print a page only from multiple paged it document prints fine, exactly as displayed on the screen. However if I choose to print pages 1 and 2 then printing starts at about 5mm below printing and print finishing 15 mm below where it should be. There is no difference in the width of the impression.

  Hi @Porky007,
  
  Welcome to the HP forums!
  
  I understand that you are having problems printing duplex and I will certainly do my best to help once I have gathered a little more information
  
  1. what version of Windows or Mac do you have?
  2. is the printer connected via USB or wireless?
  3. what program you print from? Have you tried another program?
  4 what even happened if you disable duplex printing?
  5. He made it for all pages or just one?
  
  Once I have that information I'll certainly look more in things for you!
  
  In the meantime, if you are using Windows, please download and run the HP print and Scan Doctor and see if it can detect problems for you

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• HP Officejet 6200 all-in-One series will not be printed. I get the message that the spooler is not connected.

  I have a HP Officejet series 6200 all-in-One that will not print. I received the message that the spooler is not connected how to fix this problem? Thank you. Margaretjc

  Moved from feedback

  Original title: impression of the printer

  Contact HP support.

  CrystalBall © also SEZ...

  If it's a computer with Win7 with IE10 installed, have supported HP make you that your printing software currently installed is compatible with IE10 (yet). [The chances are that it isn't.]