my iPod crashes my PC

Similar Questions

• I've used iTunes until my iPod crashed. Now, I have a Sansa and I would add my music on my Media Player.

  I've used iTunes until my iPod crashed. Now, I have a Sansa and I would add my music from my Media Player so I can set up my Sansa with my music, but it does not drag-and - drop music into my music folder.  Help, please

  original title: Media Player

  Hi CarmenRedd,

  Follow the steps in the article.

  Synchronize your media files to a portable device

  You can also contact Sansa support for more help and information.

  http://KB.SanDisk.com/

• Sync ipod Nano to the spare computer

  I would like to sync my iPod on another computer that I have "authorized". When I try to synchronize, put in guard lose all of the music on the iPod scare me off the coast. The original computer I used to charge the iPod crashed and burned.  It can't be this hard?  This is me. It's always me. Help?  Thank you.

  If you use automatic synchronization, your iPod can be associated with ONE iTunes library at a time.  It was not the 'computer' or the computer is "authorized".  By definition, iTunes can only "sync" your iPod with iTunes library.  If you have a backup of your entire iTunes library, you can restore your iTunes library to a new computer, and your iPod would be happily sync with it, because it's the same iTunes library (on another computer).

  When you have associated your iPod to a new iTunes library, the old iTunes library's existing content is erased and replaced by the content of the new iTunes library.  To avoid losing the existing iPod content, you must unload it.  By design, iTunes sync is generally in one direction, from iTunes to iPod library.  You cannot use iTunes to transfer songs from iPod to the computer (with the exception of songs purchased from the iTunes Store).  However, there are methods and third party utilities that can transfer from iPod to computer.  If you do an Internet search on something like 'ipod music transfer', you should get a few useful links.  Here is a method that requires no additional software

  http://www.CNET.com/how-to/how-to-transfer-music-from-an-iPod-to-your-computer/

  Once the files of songs from the iPod to your disk, add them to your current iTunes library.  After checking all the songs are in your iTunes library, you can sync your iPod.  Further, you should back up your iTunes data, as well as the rest of your user data.  iPods are not designed to be your iTunes backup.  To back up all your full iTunes library, you can use this method

  Manage and backup your iTunes media library - Apple Support

• iPod Classic crashes iTunes

  My iPod Classic will link is no longer in my iTunes.When I have connect, iPod appears on my desktop, but it does not connect to iTunes. In fact, it blocks iTunes. I tried to connect to another computer, and it crashed iTunes on this computer as well. The two machines (iMacs) have the last OSX 10.11.13. So I got online to see if I could fix the problem. I learned that it might be that my iPod has bad sectors. The recommendation about go in Disk Mode. Yes, I did. Now my iPod is stuck in Disk Mode. Help, please!

  This problem can be caused by a failed hard drive in the iPod.

  NOTE: To get the iPod in diskmode, you do a Reset (reboot)

  Learn how to reset your iPod - Apple Support

  What happens when you connect the iPod to your Mac running iTunes, although it is in disc Mode?

• PC crashes when you use Windows 7 and ipod synchronization

  My PC gives me a blue screen of death and crashes when I try to sync my iPod 160 GB. I use Windows 7 and iTunes 9. All my drivers are up to date, as well as my windows.

  I'm pulling what little hair I have left. Help.

  Hello
   
  You need execute the instructions below to refine the question.
   
  How do you try to sync music to the device?
  Tell us the message you get when you try to synchronize?
   
  As you've updated the latest drivers on your comoputer, I recommend you to try this issue with a clean boot to see if we can identify a program or driver causing the problem you are having troubleshooting.
   
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

  Clean clean boot.
   
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
   
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
   
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
   
  When you are prompted to restart the computer, click on restart.
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• pre crashes when recording in format ipod/iphone mp4

  Hello, I'm having a problem that when I try to share and to save to the format ipod/iphone save routine comes to 96% finished and crashes. It is present every time without fail.

  I tried several things on my own to go beyond that, and here's what I've found so far. If I strip all the music on the video he will save. I also do 30 seconds of music and it records in what I mean I can have 5 minutes of music, but every song that I use cannot lasts 30 seconds. It is one thing to copyright or is this a problem with pre? I put in all the other formats with no problems at all, it is only in the format of the ipod/iphone that I have this problem.

  I was able to reproduce this on two separate machines.

  A machine is

  Windows 7 64 bit

  4 GB of ram

  NVIDIA 9600M GT - current driver 195.62

  the other is

  Windows Vista 32-bit sp2

  3 GB Ram

  NVIDIA 9600M GT - 195.62 driver current.

  Welcome to the forum.

  Please tell us all about your project, especially assets (your source video and Audio Clips). The more details, the better it is.

  Your Audio is longer than your video? If so, you will want to make a Dip - in-black and add black Video to cover your Audio stream of 100%, or just over. I always leave an additional s 02 Black video, beyond all the sound elements.

  You can test export/share to another preset? How does this work?

  Finally, you can tell us more about your systems? One important aspect will be the IO system, i.e. HARD drive, their size, the amount of defragmented disk space, their speed and how you have allocated.

  Good luck, and we are going to look for this additional info,

  Hunt

• After update my iPad Pro with 9.3 iOS iPad crashes on safari. For example I googled something results appear, but I am not able to enter any page, because the iPod does not respond

  After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page

  It seems that it is a result of the update. Other users report it, and I also read that Apple is aware of the problem and working on a fix. Be patient and watch for an update. Some have reported that disabling Java script has worked for them. You need to check yourself.

• PC crashes when I plug in my ipod touch.

  My PC works fine until I have attach my ipod touch. The PC freezes and I can't do anything. I tried the troubleshooting, and he said that I had a missing driver. It worked fine until about an hour ago. As long as I do not connect ipod touch to the computer I have no problems and everything works fine. Does anyone have advice?

  Hello

  Have you tried resolution of hardware problems and devices?

  Method 1:

  Turn off by pressing the menu button on your iPod touch. Once your iPod goes out, plug the Ipod on the computer tower it back to see if the gel problem has been resolved.

  Method 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps: click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  1. click on the hardware tab.

  2. click on the Device Manager button.

  3. expand Bus USB controllers.

  4 right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  5 restart the computer and reinstall the USB controllers.

  6. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Reference:

  http://support.Microsoft.com/kb/2516416

• Almost any time I use the usb climb on my computer (with flash or ipod players) it freezes and crashes windows. I am up to date with drivers with Microsoft and HP, what can I do to stop this?

  I have no problem with the usb drives but in recent times, this happens all the time.  I can go into Device Manager and uninstall my usb drivers and allows that, sometimes, but it's a temporary solution.  I am up to date with drivers with Microsoft and HP, what can I do to stop this?

  Hello

  You can try to use your boot USB storage device and check if that helps. A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot. http://support.Microsoft.com/kb/929135  
  (1) perform the clean boot
  i. Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  II. in the general tab, click Selective startup.
  III. under Selective startup, clear the check box load startup items.
  IV. click the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  v. click OK.
  VI. When you are prompted, click on restart.
  VII. after the computer starts, check if the problem is resolved.

  (2) enable half the services
  (3) determine whether the problem returns
  (4) enable half of the startup items
  (5) determine if the problem returns
  (6) repeat the steps above until you find out which program or service is causing the issue
   
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
   
  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (i) click Start, type msconfig.exe in the start search box and press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  (II) on the general tab, click the Normal startup option, and then click OK.

• IPhone crashed the Middle updated and now stuck on the setting of the screen!

  My Iphone has been unusually slow. So I tried to update my phone I thought it's maybe the old version of the IOS that makes my phone lag (I think I downloaded the latest version, 10. something). While trying to update my phone, it crashed at halfway. Now I'm stuck on the screen that appears when your phone has been updated (white background, that invites you to enter the password and put in place). However, after putting in my access code and attempts to connect to the wifi, my phone indicates that the wifi password is incorrect, this is not. Also, when I try to connect through mobile data it shows that "your phone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate it, or try via the mobile connection in a few minutes... ». As a result, I tried connecting to ITunes and I got a different view of error message saying "ITunes only could not connect to this iphone." An unknown error occurred (0xE8000015).

  Help, please!

  Try If you can to update or restore your iPad, iPhone or iPod touch - Apple Support.

  TT2

• Note the application crashes...

  Note the application crashes... I have discovered that by putting my phone on "airplane mode" the app not crushed. This makes me think that there may be a conflict with the iCloud? I tried to restart but the problem persists...  Anyone has a solution, pleas?

  Hello, Craig2099!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your Notes application to close unexpectedly when you try to use it. I keep a lot of information in the Notes, so I know it's important to be able to access the app. I'd be happy to help you!

  I have some troubleshooting I suggest to go through. Before you start, I recommend you make a backup of your iPhone by following the instructions here: How to backup your iPhone, iPad and iPod touch

  Once your backup is created, go through the following steps, in order. Test after each step, stopping when the problem is resolved.

  1. Leaving the app all opened, as shown here:force a nearby application on your iPhone, iPad or iPod touch

     Then, restart your iPhone after this article: restart your iPad, iPhone or iPod touch

  2. Uninstall the Notes application, and then reinstall it. Instructions on how to do this can be found here: remove the apps Apple integrated from the home screen on your device iOS with iOS 10
  3. Reset settings on your iPhone in settings > general > reset > reset all settings. This will not delete your personal data (like contacts, photos, calendar of events, etc.), but he'll be back customizable settings (as your background screen and display brightness, sounds of alert and ringtones, settings of Date and time, etc.) to the factory settings. It will also remove saved networks Wi - Fi and passwords, as well as all the VPN or APN settings used previously.
  4. Restore your iPhone settings by following the steps here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure your iPhone as a new device (i.e. without using your backup, at least temporarily). You can connect to iCloud iMessage, FaceTime and iTunes and the App Store. Then test Notes. If it works and not unexpectedly ends, you can restore your backup by following the steps described here: restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• IPhone 7 crashed

  Hello.

  You own an iPhone new 7 hours at least three.

  Connected to the computer.

  Ask for the IOS update 10.

  And after the update crashes immediately.

  Took 15 minutes to retrieve data on its own

  Has begun... Crashed again.

  Very bad release.

  Please address emergency.

  Hello sushantUK,

  Welcome to the communities of Apple Support, it's my pleasure to help you today.  It seems that your new iPhone 7 hangs after connecting to iTunes.  I know that when I get a new camera, I can't wait to use it and I of course don't expect to plant at all.  IPhone 7 should have shipped with iOS 10 on it.  However, because the connection to iTunes has had an unexpected effect, we will try to restore the iPhone to factory settings.

  Please click below:

  If you are unable to update or restore your iPhone, iPad or iPod touch

  In particular, since you are on an iPhone 7, you'll want to note that the buttons to enter restore mode have changed.

  On an iPhone 7 or iPhone 7 more: press and hold the sleep/wake buttons and the Volume at the same time. Don't release the buttons when you see the Apple logo. Hold the two buttons until you see the screen in recovery mode.

  Thank you for reaching out to us today,

• Whenever I try to download iOS 10, the settings app crashes. How should I do if I get the update?

  Whenever I try to download iOS 10, the settings app crashes. How should I do if I get the update?

  gswizzleeeee wrote:

  ... the settings application crashes.

  This is very unusual.  Two thoughts come to mind.

  1. Your storage space is too full?  Check the settings > general > storage & use iCloud > manage storage (in storage).  Make sure you have at least 10% (hopefully more than 15%) of total storage of your iPhone for free.
  2. Use iTunes (you must use the current version - 12.5.1, as this is the only version supporting iOS 10) to upgrade.  See 'Your device via iTunes update' here: update the iOS on your iPhone, iPad or iPod touch - Apple Support software

• Frequent crashes and impossible to restore

  IPod has been crashing and restarting frequently (5 - 10 times per day) now with the new update, I get an error message and I see the same error message when you attempt to restore (error code 4013).

  Does anyone know all the potential solutions that do not require to pay me anything / send to Apple?

  Hi Cwatk003!

  I see that you get an error message on your iPod when you try to restore your iPod is reboot and crashing frequently.  I know it's important to have your iPod working properly, so I'm happy to help you.  Please fill all the troubleshooting steps in the following to see if you can fix this problem yourself.

  If you see an error when you update or restore your iPhone, iPad, or iPod

  If you see errors 9, 4005, 4013, 4014, when you restore your iOS device or

  Thank you for using communities of Apple Support.

  See you soon!

• Apple's app Store crashes on Watch

  Since a recent update for the iPhone Apple Store, it crashes all the time on the watch.

  It worked fine before. I restarted the phone and watch uninstalled the app and reinstalled it, nothing helps.

  Any ideas?

  Hello

  If you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Update the software on your Apple Watch - Apple Support