my @ key not working my newly bought hp.what I do

Similar Questions

• Fn keys not working not not on my Satellite P200D-127

  Function keys not working not not on my Toshiba Satellite P200D-127

  I try to find the drivers for the keyboard, but not luck :(

  I'm trying to solve this problem since I bought this laptop.

  Can someone help me with this problem?

  P200D-127 is part of the PSPBLE series.
  The Toshiba European page doesn't provide the drivers XP especially for this series.
  But there are a few other P200 series and XP drivers were already released.

  Then why you n t check the hotkey Utility released for other laptop P200 series.
  Maybe it will work, if not, then there is nothing to do but wait until the drivers have been released.

• Keyboard keys not working only after you install the new OS Sierra

  I just install a new one copy Mac OS Sierra, but after that the keys on my keyboard don't work properly as some of the keys do not work yet at all. What can I do to solve this problem, and also if there is any software I can use to test the keys on the keyboard works properly or not

  See if you have enabled mouse keys. Other users have reported that after update to Sierra

  OS x: Impossible to type while mouse keys is enabled - Apple Support

• Aspire the s7 - 392 fn keys not working do not: airplane mode and switch poster

  Hello

  I read messages on the other fn keys not working do not, but can't find anything about these two (fn + q and fn + e). I just reinstalled windows 8.1 (and spin the dual boot ubuntu) and now these two keys have no effect.

  Does anyone know that drivers are responsible? Or have any other ideas?

  Thank you.

  Yes, if you look in the applications section of our manuals and drivers, you can download the Acer Launch Manager. Good starting point, but I'm not 100% on what software is required for the keystrokes, and not all software can be downloaded (in reason of the royalties and other legal issues).

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.

• I bought lightroom in 2010 and have the serial number and a new computer. When I downloaded the latest version and typed in the serial number, it does not work. I bought at the origin of the creative suite. Any suggestions?

  I bought lightroom in 2010 and have the serial number and a new computer. When I downloaded the latest version and typed in the serial number, it does not work. I bought at the origin of the creative suite. Any suggestions?

  Your serial number works only with the EXACT product and the purchased version

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• I am trying to download Lightroom on my computer but it does not work.  I bought a license for this, do I need a serial number or something?

  I am trying to download Lightroom on my computer but it does not work.  I bought a license for this, do I need a serial number or something?

  Thank you for your response.  I called Adobe and they have managed to solve

  the question.

• AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  AirPrint is not working since 9.3.1 what airprint update - not found.  tried the suggestion of JimHdk, who worked for a single document. any suggestions

  Since we do not know what may have suggested to Jim, power cycle your router and the printer and force restart the iPad. Unplug the router and the printer power for 30 seconds. Plug in the router first and let it restart. And then reconnect the printer power supply. Then force restart the iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• I have a G5 PowerPC running (non-Intel) 10.5.8 I tried to load my PS7, but it does not work on this system. What is the oldest Photoshop I can install?

  I have a G5 PowerPC running (non-Intel) 10.5.8 I tried to load my PS7, but it does not work on this system. What is the oldest Photoshop I can install?

  Hi Jeff, please see the Photoshop here system requirements: https://helpx.adobe.com/photoshop/system-requirements.html#main_Older_Versions

  Looks like CS3 can operate.

• My adobe 9 photoshop elements do not work with windows 10. What should I do?

  My adobe photoshop elements do not work with windows 10. What I have to do, that it works?

  You can use compatibility mode to install.

• Satellite P850 - FN keys not working not

  I recently bought a PC Toshiba laptop p850/049 and reformatted it for windows 7 64 x (from windows 8). After installing all the software Toshiba etc. everything worked fine but recently I noticed that the special function keys have stopped working. They certainly worked after I reformatted the computer because I remember the first time annoyed that whenever I went to refresh a webpage (f5) it would pass the trackpad as I was not familiar with the new configuration.

  I thought that the problem may be due to software "Logitech setpoint" I installed but I uninstalled since and the problem remains. Then I tried to uninstall and then reinstall the added value of packet and HW installation software and then check all card flash/keyboard settings.

  Then I tried to check the BIOS setting with no luck. No matter what setting I put it to the special keys do not work. When I "special function keys" value and press function buttons, the keypad lights up but nothing happens, in this mode if I press fn + function keys, they work in their normal mode IE spell check or refresh or full screen, etc. When I have it value "normal f1-12 function keys" the same applies to this f5 refreshes successfully, but fn + f5 does nothing. I tried to play with the settings in accessibility and HW set up and flash cards and in the BIOS without effect (it seems that change the HW set up and bios configuration change from the other and vice versa).

  It seems no matter what I set it on the keyboard seems to be impossible to access the option special function keys. I recently got sp1 under win 7 x 64, this could be a part of the problem? I'm not entirely sure when keys doesn't work but I don't know they worked after reformatting to windows 7.

  any help would be appreciated

  Hello

  Did you restart the utility of Flash Cards, which can be found under:
  All programs-> Toshiba-> restart Flash Cards

  In addition, you must also install the utility Support Flash Cards next to the VAP (value added package)

  This utility can be found here:
  [Flash Card Support Utility for Win 7 64 bit v1.63.0.14 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 7507 selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 82164 & OSI D = 30 & driverLanguage = 42]

• Re: Function keys not working not not on Satellite U400

  I recently bought a new U400 - h - 13 it is boneless.

  So I installed WinXP SP3 and all the drivers downloaded from the Toshiba support page. The machine works well, but some of the function keys, namely Fn + F1, F2, F3, F4, and Toshiba Zoom do not work. All others are OK.

  What can be the reason?

  To install the drivers it is not enough. For some functions, you must install the tools of Toshiba on the Toshiba site.
  Install the utilities of the shortcut key and the Toshiba Utilities.

  Maybe you should also update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite L850 - special function key not working not properly

  Hello world

  I had Satellite L850 bite of windows 8 64 (pskg8a-07f001) running for only 2 months.
  Only within this week, the special function key does not work do not, whenever I start the pc, I have to go into toshiba assist office then the function key, and then click ok, it will work.

  But the touchpad has been defined as licence also under keyboard setting was defined as special function mode. But don't know why every time you start the pc must go in the function key box, and then click ok.

  When I bought everything is ok, I can use the special function key to turn, up and down the volume and disable wireless... etc.

  Please notify. Thks a lot!

  Have a look here:
  Function key change to Satellite and Qosmio 800 series
  http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

  You can use the traditional keys FN + F mode or just a F key mode.
  This can be enabled and disabled in the BIOS or the HWSetup

  In BIOS go to Advanced-> system-> the function mode button configuration
  This mode can be changed
  Also remember that the function button is activated too

• HP 250 G2 KEYBOARD FN KEYS NOT WORKING NOT

  Hello, I recently bought a laptop HP 250 G2 without OS (freedos)

  After you have installed windows 7 Home premium x 64 I went to the web page of the HP support and downloaded all the drivers, install them and everything seems to work without problems.

  The only problem is that the HP support page does not all the drivers for the keyboard and the result is that all the FN buttons are non-functional.

  In Device Manager the keyboard is displayed normally because Windows 7 automatically installs the drivers, but these aren't 100% compatible so that the FN keys would work.

  Please, it is very important to be mean use only FN keys so that I can change the brightness, sound level and tun works / stop wifi.

  Thanks in advance.

  Hello:

  Try the 450 Probook G1 hotkey driver:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_135423_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Envy 17: Keyboard Flex, the keys not working not properly, a fan failure

  I bought my computer laptop last January 2014 to JB HiFi, I already noticed that the keyboard flexes, but they told me that it is normal and the keys work well anyway.

  Move to the last month, I noticed that the bottom surface of my laptop keeps splitting open whenever I have fold to the top of my screen to turn it on. If it can be repaired by pressing gently to close again, it seems to have caused the laptop to ask a fan failure notice every time that I turn it on, asking me to press the Enter key to continue or wait 15 seconds so it will turn off.

  I searched on youtube on how to solve this problem and I discovered that blowing fan can solve this problem quickly. I tried several times the breath of the fan before turning on the laptop but it does not always work for me. Fan failure screen always displays at startup. I could not work long hours because I noticed that my laptop has been overheating a lot, probably because of the failure of the fan. I had to turn off for a few minutes let cool and start to work again, thus breaking any momentum of work I.

  Then, five days ago I realized that Fan failure screen is not displayed, but things just got worse. Left keys do not work correctly more for example. If I press 'e', it will enter "qe", "2" will enter the '13' and so on. Now this made me suspect that the space in which the keyboard flexes a lot and the fan failure overheating left hand side of the laptop were the cause of the keys with a malfunction, maybe condensation or so.

  Please help me out here, I use my laptop for my studies and I can't afford to buy a new.

  Kind regards

  Hi K N R K,.

  I tried your method three times, but the keys are still faulty. This is the current behavior I get:

  F5 - turn on the backlight with ' + '.
  F7 – lowers the volume with ' - '.
  F8 - increases volume with ' / '.
  2. does not show '2', but active random dialog boxes (depends on the active window)
  NumLock - types "5 [---].
  w active entry
  Shift + w - paste from Clipboard
  Enter - 'L';
  4 entries "14".
  5 entries "25".
  6 - entries '+ 6'
  -entries + '+ 6'
  x - entries 'x 25 '.
  1 entries "14".
  2 entries "25".
  3 entries '3 '.
  CTRL + v - entered "s".
  FN - inputs + 6
  SPACEBAR - entered '25 4. / »
  Up - entries '.on '.
  -Scrolling and entries "14".
  0 - entered "0" and enter
  . -entries '.» 3. "

  If ever the keyboard will work properly again, you have any recommendation with the intrados cleavage whenever I have bend toward the top of the screen to turn on the laptop.

  Kind regards