Windows 7 upgrade bsod now every 30 minutes - Tosh P200 BB7

I have just upgraded to Windows 7 - install went well, but now I get the bsod every 30 minutes approximately. The error messages indicate a problem of kernel and disk error hard - not sure it might be. It charges fine, but then (even if I leave just sitting after reboot) it ' new bsod. Clues? I tried chkdsk but who have not as well.

Did you do a clean install or upgrade to Vista?

If Vista is bloated with a lot of applications, some applications/drivers can cause a problem in Win7.

You may need to reinstall Win7 with a clean install

Tags: Toshiba

Similar Questions

  • Windows file extension keeps opening every 2 minutes?

    Windows leader continues expansion opening every 2 minutes, I have like 8 windows open automatically, how do I stop?

    Hi JoeyMashike,

    (1) what is you receive the exact error message?

    (2) since when are you facing this problem?

    (3) remember to make changes?


     

    Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  • Windows Explorer stops and starts every few minutes on XP

    I have Windows 7 every few minutes a message: "Windows explore is close and restart".

    I took the following steps to resolve this problem, but not completely as in computer science, I'm afraid

    I am groping in the dark:

    1 - tried to clean the computer in SafeMode to network using Tweaking.com after the first

    disable the anti-virus

    2-scans for corrupted files (using cmd in start then sfc/scannow) but there is no apparent integrity

    violations

    3 reset

    Browing 4-delete history

    Unable to read the 5 modules

    These actions appear to have had no effect and power problem.

    I'd appreciate any help in simple words and I'll buy you a beer a day

    Ray

    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance?sort=lastreplydate&dir=desc&tab=Threads&status=unanswered&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=Questions&tm=1414809926650

    above is the link to the forum windows 7. Thank you

  • I installed windows 7 upgrade.but now I want to install win xp.but win xp is not intallind on my computer.why?

    win xp is not installed on my computer.it says that the installation cannot continue because the version on your computer is newer than the window located in the CD.
    now what should I do?

    You must boot from the XP CD. Cannot start inside Windows 7...

  • Why windows messenger throw me out every few minutes?

    I have to connect to messenger all the time and after 5 or 10 minutes to reconnect.

    Hello

    they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

    http://windowslivehelp.com/product.aspx?ProductID=2

  • Clean installed and active Windows 8 signed me off every 10 Minutes guest "you are about to be signed within 30 seconds.

    Hi all

    I have reinstalled Windows 8 on one of my Acer laptop which came with OEM Windows 8. Because the key Embedded BIOS, install never asked for a key. After you have installed the wireless network driver, the computer is connected to the internet and glass get immediately activated. However, the system alerted me 'You are about to be signed in 30 seconds' shortly after and rebooted itself.

    I guess it was because that the limitation of the inactive windows (when I connected first of all, I have not get Windows activated due to no internet), so I let it reboot and continue to play with it. But the reboot thing won't go away.

    One thing is that when the system first rebooted itself, no installation or major update does, so I guess that nothing dangerous is done.

    Someone met with such a problem and how to fix it?

    Thank you

    I tried to restore all starts and start services gradually from the clean boot state.

    What is interesting, is that, after all what can once again, the system is absolutely fine.

    I guess the question was because of the activation process, or a problem a start-up program or service such as a fast storage intel, content etc.

    Thanks for the help, I think I should be fine.

  • Windows live messenger 2009 guard disconnect every few minutes

    My Windows Live Messenger 2009 disconnects every two minutes. What can I do?

    Hi karenbc,

    The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

    Link: http://www.windowslivehelp.com/product.aspx?productid=2

  • HP LaserJet maintains initialization every 5 minutes on the minute no matter what I do.

    I'm on my second HP LaserJet M276nw in a month. Both are on sleep after 1 minute... one did from the beginning, worked/second was sleeping fine for a week and now every 5 minutes it does it of noise, wakes up without reason and goes in initialization mode, then back to sleep. Very annoying. Is there a way to stop this? I was told by support that it is not normal, then I traded one and now I have another.

    I use it very little, yet a lot of ink, and it is plugged directly into its own support.

    ANY IDEAS to try would be very appreciated, other than that I like the printer up to now

    Thank you

    Caper

    Thank you Lion, but I have tried this several times because that's all the Indian call center suggests to try again and again, does not work well.

    I discovered thanks to a suggestion from dansdaduk that if I unplug my router and then turn off my printer, wait, then turn on my printer with nothing hooked up wireless, and then restore my wireless router, things seem to be FINE. Makes about 6 days now and everything seems still well but were not using everything as far as the end is... still could happen again, but if I can get a week or more out of this solution, I'm HAPPY!
    Thank you very much, if it continues this way I'll mark the resolved next week.

    Thank you ALL

  • The series 7000 keyboard & mouse Microsoft crashes every 5 minutes

    Original title: hardware device

    I have a Microsoft keyboard & mouse 7000 series. I am running windows 7. It crashes every 5 minutes for about 15 seconds then work. I reloaded drivers twice

    Hello

    Try the steps of troubleshooting mentioned in http://support.microsoft.com/kb/838398/en-us

    Also, put the computer in a clean boot state just to check if there are any third party software, causing this problem.

    http://support.Microsoft.com/kb/331796/en-us

    "Note: when finished troubleshooting, replace the computer in normal mode, by following the steps in the section" how to return Windows to a normal startup mode.

    If the problem persists, please do get in touch with Microsoft hardware support to http://www.microsoft.com/hardware/en-us/support

    Hope this information is useful. If you have any questions, let us know.

  • Activation of Windows 7 Upgrade Version after clean installing forced

    While the reconstruction of my computer, the hard disk on which Windows Vista was installed has failed and I was forced to do a clean install of Windows 7. I was in the process of upgrading to Windows 7 at the time, but I've owned a copy of Windows 7 upgrade and now the software doesn't recognize my product key for a clean install. Is there anyway that I can use my Windows Vista and Windows 7 product keys to activate my operating system?

    Skip entering your product key Windows 7 and complete the installation.

    When you reach the desktop, click Start, right-click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click the link x days before activation.

    Click on the link that says: "show me other ways to activate.

    Enter the product key

    Click next

    Select the Activation of the phone

    Click Next when you enter your key page

    Select your country

    Click Next, call the number listed

    Be sure to explain your situation to the Appeals Officer.

    Provide the installation generated when ID requested by the call agent

    They give a confirmation ID in return, enter it

    Click next to complete the activation.

    However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

    15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

    So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

    or

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Regenerate the Datastore groups every two minutes

    Hi all

    Currently, I have added a NFS data store on my ESXI hosts and now every two minutes I see regenerate the Datastore groups every two minutes. My VMKernel is set on a group of ports DvSwitch and MTU 9000. The Load Balancing Teaming and failover strategy he set for road base on physical NIC load. No idea why this happens or if this happen to someone can point me to the right direction.

    Thanks for any help!

    OK, I made myself. This problem was linked with the MTU not set correctly on the DvSwitch himself. Once I changed the Maximum MTU on Advaced Options, he stopped.

  • Windows freezes for 5 to 10 seconds every few minutes.

    After the upgrade to Win 8.1, I had some experiences with my computer freezing for 5 to 10 seconds every few minutes. Music continues to play, the cursor keeps blinking (although sometimes it freezes too) and the mouse can be moved, but try typing don't work and try to close, open, move or otherwise interact with the programs (applications office and modern) fails. Then, at the end of the gel in short, everything what has been done during freezing happens everything both. Restart breeze the trend until it starts again (sometimes hours later, other time days).

    It seems to be overheating problems and SFC came clean the problem only arose recently (well that before, it happened sometimes with IE only but who stopped). I'm not running 3rd party antivirus and Defender is coming clean, and so have free McAfee scan.

    My computer is a Dell XPS 1520 running Windows 8.1 update update 1.

    One last note, the problem seems to occur sometimes when I use Windows built-in backup of the file system. I can't actually think any time it all started when I was not hung on the backup media, even if it persists after the disconnection. I used three different types of backup media, so I don't know if one of the drives is the cause, but I will deal with that now.

    OT: Occasional Windows freezes

    Hello

    This issue could be due to various reasons like virus on the computer, the program of third at the origin of the problem.

    I suggest you try the steps from the following link:

    8.1 Windows, Windows 8 or Windows 7 hangs or freezes
    http://support.Microsoft.com/kb/2681286

    Note: 1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • HTTPS connection systematically disconnected every 2 minutes via VPN in Windows 8

    * Original title: VPN via https issues - win 8

    My wife works from home to connect to a vpn over an https connection and then connect to another piece of software based on the web through an https connection.

    It worked well until Christmas 2013 when she bought a new laptop with windows 8, upgrading to a connection high speed fiber (with the same Internet service provider) and had a new router.

    Since then it can connect to the vpn but once connected to everything that she's trying to connect an https connection systematically disconnected every 2 minutes.

    The vpn is connected, and also other programs outside the vpn as Skype and lync stay connected.

    His employer has built a new version of the web-based software as there was a problem with this and windows 8, but this has not solved the problem although it resolved all the problems of connection to his colleagues.

    Currently, she is able to connect via a desktop remotely to his employer (instead of the vpn) and then connect to the additional software via https.

    2 weeks ago she took his laptop in a House of colleagues and connected no problems whatsoever and maintained the connection.

    She informed her employer of which, after 3 months of development new software and maintenance to a remote office installation just for her, said now it must be a problem with the Internet service provider.

    PSI (EE) performed many tests and say there is no problem with the line and or they block certain ports etc.

    Today, she attempted to connect using a laptop with windows 7 (according to her an old) and had no problem that seems to rule out a problem of ISP or router problems.

    There seems to be a problem with windows 8 (regardless of Web browser - the same problem is present with ie, chrome or firefox), but only among us — even if I want to confirm that in trying a few more locations with different providers of Internet services, and that even in a different place)

    Anyway, after all this language of wood can anyone offer suggestions of what the problem may be or any what more ways to collect the information required to provide a solution.

    Thank you

    Hello

    We have dedicated forums for users of VPN. I suggest you to report your query in the TechNet forums to improve assistance in this regard.

    Here is the link for your reference:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

    Hope this information helps. If you have any questions, please let us know.

  • I have upgraded to Windows XP Professional and now Windows XP Media Center won't play DVD - component missing.

    Now I have Windows XP Professional after the upgrade to Windows XP Media Center Edition Home 2005. Now my Media Center won't play DVDs and I keep getting the error message "Missing Component". I tried to reinstll cumulative update 2 for Windows XP Media Center 2005 that has worked for me the last time I had this problem, but now I get the Error Message "you must have Windows XP Media Center 2005 installed to get this download and it shows already on my computer as installed components. When I reinstalled it 3 years ago he corrected the problem of DVD. Help, please

    Thank you for your help. Here are the answers your request:

    "Windows XP Media Center version 5.1 Edition - this shows when I"run"- winver - ok.
    Complete error message: "Missing Component - required component Media Center is.
    missing. Please contact the manufacturer of your hardware.
    KB article: WindowsXPMediaCenter2005-KB900325 - usa .exe
    The windows of origin is always on display as shown above, but I received a free upgrade to Windows XP Professional CD and installed on my computer. And under 'Information system', it shows as - Microsoft Windows XP Professional 5.1.2600 Service Pack 3.

    This problem started about 10 days when I used the CD of XP Professional to correct a problem. My computer is a Dell Dimension 5100 and I have two CDs that were sent to me - Dell - Microsoft Windows XP Professional SP 3 and Microsoft Windows XP Media Center Version 2005 with update Rollup 2.

    Thanks again and I ran the "fix it" you suggested but it have no problem found to fix. Every thing works fine on my system, but Media Center won't play DVD. It will play CDs and videos on my system.

    The initial problem was that I could not download the Blackberry Desktop Software - updates needed. The computer came with Windows XP Media Center Edition Home and I use Internet Explorer 8 as my default browser. I also use Mozilla Firefox as my backup browser.

    Please stick to your thread to avoid confusion of origin: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/i-have-upgraded-to-windows-xp-professional-and-now/f5245962-e9b4-4415-8aff-bc1d972f8120

    Note that I asked you to MOVE your original thread on the forum of material WinXP, not start a new thread.

    Also note that you don't have NO Windows XP Media Center Edition, installed now if you upgraded to Windows XP Professional.

    PS: If "winver" still says Windows XP Media Center Édition, did you not correctly upgraded & something is not. Better contact the Dell Support on this issue (if they'll still talk to you).

  • Every few minutes, we receive a small Microsoft Windows pop-up window that says: «Carbonite Secure Backup Engine not working anymore...» »

    Every few minutes, we receive a small Microsoft Windows pop-up window that says: "Carbonite Secure Backup Engine has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

    Our computer remotely accessible Carbonite technician.  He said Carbonite works correctly and could not understand why we continue Gets the pop-up.  Carbonite has been uninstalled and reinstalled twice, but the pop up comes back.  Any suggestions?

    Hello

    Generally, this sort of thing occurs when a program conflict makes one or the other case work, maybe even for a few seconds. During these few seconds Windows will pick it up and give you this popup. Here's a possible solution:

    1. Click the start or Windows Orb.
    2. In the search bar, type 'system' (without the quotes)
    3. At the top of search results, there will be an option for "System Configuration"
    4. A window willl pop up, with several tabs and options. Click on the tab "General".
    5. On this tab, there will be a selection for the "selective startup". Click on this button.
    6. Then two options becomes clickable, deselect the option "Load Startup items".
    7. Restart your computer. ! WARNING: Do not access the internet during this time because you will be vulnerable to viruses, spyware and software malware!
    8. Once he starts back, Carbonite Backup launch, because no program will run.

    The problem should be solved. If this is the case, immediately turn on your antivirus program and enjoy your work computer. If not,

    1. Follow steps 1 through 5 above to return to the System Configuration.
    2. Under Selective startup, uncheck also load Services.
    3. Restart the computer.
    4. Once it starts, run Carbonite.

    It should now be resolved. If this is not the case, there is certainly a problem with either Carbonite or how Carbonite and Windows work together, and you should communicate with each other.

    For further assistance, if this does not resolve the problem, then slowly run your normal programs one by one until the multibordure question once again. You have now isolated the program conflict! Congratulations!

Maybe you are looking for

  • How do the 5 server not listening on ports 80 and 443

    I want to configure an Apache Server on a Linux virtual machine (using the last VirtualBox) on my Mac running El Capitan 10.11.3. 5.0.15 server is already running on the Mac (and I want to keep it, with the exception of web services). I have disabled

  • Cannot join or make calls after agreeing in beta for group video calling on mobile.

    I am immediately thrown to join group calls and can no longer initiate calls. It worked perfect yesterday until I got the email to be in the beta

  • XP Embedded SP2 end of support too?

    I understand that the XP SP2 will have more no updates for it security. What about XPe SP2? Why the site MS says it won't be retired until 01/01/11? Will I continue to receive updates? I'll still be able to push the WSUS? I'm very confused about the

  • If a mouse stops working, the device icon mouse disappears - Windows 7

    If a mouse is dead, the device icon smile disappears from the window of computer peripherals. In addition, after that buy us a new mouse the computer recognizes the new device and automatically download the software. I ran a Logitec wireless mouse an

  • Query works in 12 c, not in 10g

    The following code does not work in the database to Oracle 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit but works in 12 c.Does not I mean that the query at the end just returns the first node. 12 c, it returns the record set.I am trying to und