My keyboard 6000 battery light will not be lit and there is no power or connect. All solutions?

Similar Questions

• Apple TV light will not turn off and I don't have any service? The lights are still flashing. Tried new battery and still the same problem.

  MY Apple TV light is stuck on and I can not get a service or a screen.

  I would recommend restoring the ATV via iTunes...

  Restore your Apple TV with iTunes - Apple Support

• HP F2210 printer will not be closed, and all the lights are on. Tried unplugging don't, no results.

  My Hp F2210 printer will not be closed, and all the lights are on. using a compaq presario with windows xp installed. I tried to unplug the unit. Problem has not been resolved.

  I'm sorry that you are experiencing this issue. Sometimes there may be ink system failures, ink cartridges are bad, or even the printer maintenance needs.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c01430567

  Let me know if it helps.

• ages 7 months and a battery that will not hold a charge for at least 10 minutes

  My HP pavilion Entertainment PC is 7 months old and a battery that will not hold a charge for at least 10 minutes.  In addition, the battery icon says "fully charged, do you replace battery.»

  With batteries which cost $129, I'm a little ticked off.  I can't find information - anywhere on this site!

  The guarantee covers a dead battery?

  I bought 5 HP because of their excellent warranty.  But this, honesty, will be my last, if the battery is not covered.

  Thanks in advance for the advice and guidance!

  Wow, awesome!  Thank you very much!  The only thing you could have said or done was better deliever the new battery!

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Safari will not save history, and will not, leave only force quit

  My Safari will not save history and will not leave. If I try to quit, nothing happens then a window opens upward with an error message and I have to force quit. Safari will not leave for an update of the system either.

  Corruption Safari       See post by Linc Davis

• Question of illegality leading to Windows 2008 Server with more than 80 updates that will not be updated and a pilot for the series it won't install

  From of the CBS.log journal:

  2016-01-07 16:55:10, enforcement operations 1 CSI Info 0000085f; 1 will not lock/unlock and follow:
  Installation (5): flags: 0 tlc: [2f8866815daa89b0e3664a874948093e, Version = 6.0.6002.19439, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) Ref: (flgs: guid 00000000: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:150 {75}] "' Package_2_for_KB3075220 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0.3075220 - 5_neutral_GDR ' ncdata: [2] {1} '2'") print: (null)
  2016-01-07 16:55:10, the change of information CSI 00000860 list components: {(null)-> 6.0.6002.19439 2f8866815daa89b0e3664a874948093e, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral}
  {6.0.6002.18356-> 6.0.6002.19439 Microsoft-Windows-TerminalServices-ClientActiveXCore, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral}
  2016-01-07 16:55:10, error CSI 00000861@2016/1/7:08:55:10.470 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2016-01-07 16:55:20, error CSI 00000862 (F) STATUS_ILLEGAL_CHARACTER #4243867 # to CFileInstaller::CommitChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000863 (F) STATUS_ILLEGAL_CHARACTER #4243866 # to PrimitiveInstaller::CCoordinator:FinalizeChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, info CSI 00000321 SMI primitive installer [completed]

  2016-01-07 16:55:20, error CSI 00000864 (F) STATUS_ILLEGAL_CHARACTER #4242866 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000865 (F) STATUS_ILLEGAL_CHARACTER #4242865 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000866 (F) STATUS_ILLEGAL_CHARACTER #4242864 # to CCSDirectTransaction::ExamineTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, error CSI 00000867 (F) STATUS_ILLEGAL_CHARACTER #4242863 # to CCSDirectTransaction_IRtlTransaction::ExamineTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:20, d:\longhorn\base\lstring\lblob.cpp(2217) 00000868@2016/1/7:08:55:20.757 (F) CSI of the error: error STATUS_ILLEGAL_CHARACTER from the RtlTranscodeLBlobs expression function: __rv. UcsCharacter! = (0xffffffff)
  [gle = 0 x 80004005]
  2016-01-07 16:55:38, error CSI 00000869 (F) STATUS_ILLEGAL_CHARACTER #4244511 # to CFileInstaller::CommitChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 a (F) STATUS_ILLEGAL_CHARACTER #4244510 # to PrimitiveInstaller::CCoordinator:FinalizeChanges (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, info CSI 00000322 SMI primitive installer [completed]

  2016-01-07 16:55:38, error CSI 0000086 b (F) STATUS_ILLEGAL_CHARACTER #4243994 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 c (F) STATUS_ILLEGAL_CHARACTER #4243993 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086 d (F) STATUS_ILLEGAL_CHARACTER #4243992 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086e (F) STATUS_ILLEGAL_CHARACTER #4243991 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd0000161]
  2016-01-07 16:55:38, error CSI 0000086f (F) HRESULT_FROM_WIN32 (582) #4242712 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CSI 00000870 (F) HRESULT_FROM_WIN32 (582) #4242527 # to Windows::ServicingAPI:CCSITransaction:ICSITransaction_Commit(Flags_=_102_(0x00000066), pSink = NULL, disp = disp, coldpatching = FALSE) [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CSI 00000871 (F) HRESULT_FROM_WIN32 (582) #4242526 # 34399459 us by Windows::ServicingAPI:CCSITransaction_ICSITransaction:Commit(flags_=_0x00000066,_pSink_=_NULL,_disp_=_0)
  [gle = 0 x 80070246]
  2016-01-07 16:55:38, error CBS Exec: could not validate transaction CSI to run changes. HR: 0 x 80070246
  2016-01-07 16:55:38, Info CSI CSI Transaction 00000872@2016/1/7:08:55:38.994 @ destroyed 0x1b9b710

  CheckSUR.log:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.23186
  Version of the package 25.0
  2016-01-07 13:00

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1308
  No error detected

  Control CoreOS key to repairing the corruptions.
  Winner version: 6.0.6002.18005.
  The architecture of the processor: x 86.
  Check the key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18005&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers \metadata\elements\ComputerName
  Recreated the value: @_type.
  Recreated the value: @dataOnly.
  Recreated the value: @default.
  Recreated value: @description.
  Recreated the value: @displayName.
  Recreated the value: @handler.
  Recreated the value: @legacyName.
  Recreated the value: @legacyType.
  Recreated the value: @migrate.
  Recreated value: @scope.
  Recreated the value: @xsd: type

  I tried following https://support.microsoft.com/en-us/kb/942968

  The GlobalInstallOrder.xml both the install.wim from the disk image of Windows Web Server 2008 x 86 and for KB955430 files under %winroot%/winsms both starting.

  Any ideas on how to determine what is the cause, updates do not?

  In addition, I have a lot of lines like these:

  2016-01-07 17:03:02, info CBS Plan: jump package since its start State and the target State are both missing for the package: Package_for_KB2654428_client ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0, current: 0, pending:-16, start: 0, there is: 0, oriented: 0, limit: 4

  Please post your query to the Technet forums as linked server

  TechNet - Microsoft forums

• Windows email will not be printed and give this message "email error unexpected call to the method"

  Windows email will not be printed and give this message "email error unexpected call to the method"

  is there a solution for this?

  Yes, I uninstalled the upgrade to IE9 and rebooted and unfortunately I can print my email again! No more unexpected call to the method.  Check my IE and it's IE8.

  Problem solved!

  Thanks for the replies.
  Neal

• my cd rom will not completely close and when I close it restarts the computer in safe mode. in the technet event log it says the following: IO_ERR_BAD_BLOCK

  The cdrom will not close completely and it won't open when I push the Open button.  When I manually open with a paper clip then close again he still doesn't close completely and it restarts the computer in "safe" mode  In the same newspaper, it has the following:

  Log name: System
  Source: cdrom
  Date: 20/03/2011-16:18:10
  Event ID: 7
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Jeff-PC
  Description:
  The device, \Device\CdRom0, has a bad block.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      7
      2
      0
      0 x 80000000000000
     
      169760
      System
      Jeff-PC
     
   
   
      \Device\CdRom0
      0F0080000100000000000000070004C0000100009C0000C000000000000000000070EB1C000000006378060000000000FFFFFFFF01000000580000C40201000000200A12480200400010000004010000000000000000000048CC860580FAFFFF0000000000000000407B930580FAFFFF806BAC0580FAFFFF6E9D030000000000280000039D6E00000200000000000000700003000000000A00000000110500000000000000000000
   
  

  I'd appreciate any help you could provide.  Thanks in advance.

  Hello

  Looks like the CD-ROM drive is a failure. Uninstall and reinstall the disc and check if this solves the problem. If the problem persists, you should replace the disk.

  To uninstall the drive from Device Manager:
  a. Click Start, then type devmgmt.msc in the start search box then press ENTER.
  b. right-click on the CD and click on uninstall.
  c. restart the computer.

• My system will not download upgrades and assistant says update error 0x8024402c

  * Original title: win 7 64-bit ultimate on asus kgpe map server dual socket

  my system will not download upgrades and assistant says update error 0x8024402c (2016-03-29-T-10_53_07a)... whats up?

  Turns out that my computer has a virus, of which a part had apparently obtained in the area of the 100 MB of my raid0 array system.  When I reloaded the os I've removed then reinstalled the partitions, then reloaded the software and my problem calmed.  Thanks for your ideas.

• Adobe Reader 11.0.10, will not print.  Mssg "There are no selected pages" How do I print?

  Adobe Reader 11.0.10, will not print.  Mssg 'There are no selected pages', even with selected pages.  I tried 'Image', same mssg err. ;  Printer has the latest drivers.  Printer prints everything (browsers, docs, .xls), but not Adobe.  Used vacuum to unistall, received error message: 5 on GetNamedSecurityInfoand could not define Loyer.  Any help would be greatly appreciated.  THX

  Assuming you're on Windows, try changing the following preferences

  • Documents: series "Show the documents in PDF/A mode" Never
  • (Protection): Disable "protected at Startup Mode.

• ???  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  I just installed Lightroom 5 from Amazon for my Mac with 10.10.1 software.  When I open it I get: "an error occurred when attempting to change modules.  It will not import pictures and has no side panels under the library.  What should I do?

  Error changing modules | Lightroom

• Project file will not play back, and PremPro does not end without force quit.

  One of my projects seems to be broken, it will not play to wither the source window or timeline. All changes are intact but the rendered bar seems to be either red of missing on top of the timeline. All the backup automatically of the project seems to be affected, BUT other projects are ok. Also everything by opening this first project pro will not stop and instead comes up with "premerie pro has experienced a serious error...". "When you are prompted to force quit.

  
  

  What is the problem? !

  Found a solution, open a new project and import the sequence starting from there, the first cart.

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.