My laptop starts to turn on at startup repair and it says tht something's wrong with the C:\ drive

Similar Questions

• Suddenly my laptop refuses to open the log in page and everything leads to blue screen of death, something to do with the hard drive problems.

  I do not quite understand computers.

  Randomly, I received a notice pop up saying that I need to backup my files because windows detected a hard disk problem.

  I did scans and system restore but nothing works.

  I used to be able to access safe mode, but now I do not get this option.

  I kept getting the blue screen of death to do something.

  But now I have nothing other than the loading page "TOSHIBA Leading Innovation".

  I have a Toshiba laptop, his more than two years and use Windows Vista.

  No miracle solution?

  Or should I bring to wait for him?

  If so where I will get the best service at afforable prices?

  Hi BethanyLa Chappelle,

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  What to do if Windows does not start correctly

  What are the system recovery options in Windows Vista?

• My laptop starts to turn himself :(

  Hello

  I have a HP Pavillion g series (Pavillion g6) computer running windows 7.

  Recently, my laptop started to turn off when it is not plugged in. The battery is still generally about 30-40% (or if the battery icon says) when it shuts down completely.  It shuts down completely and when I try to restart it it starts black screen with "start in safe mode" or "start windows normally" etc. of the options.

  It's really starting to frustrate me, and I've poured through from google and these forums to see if I can find something that could help but so far nothing.

  Any help gratefully received.

  Hello

  Please, use the following instructions to check the battery:

  http://support.HP.com/us-en/document/c00821536

  You may need to replace the battery.

  Kind regards.

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Startup repair and then updated conf. over and over again. operating system is vista.

  power on laptop goes to the Startup Repair and Configuration of updates then stops a restart, only to do it again and again and again.

  Follow the instructions and make a Bootable CD from him.

  Make the BOOTABLE CD into the computer that you downloaded for.

  Read the advice and follow it.

  Advice is given for a reason, because that is how the manufacturers recommended for:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And if this does not resolve the problem, transfer your question in the Forum of Windows updates:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When repost you it describe exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  All this began after Microsoft security essentials did an update in February.

  Hello

  Method 1

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you perform the disk check and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  hope this helps,

• After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

  ORIGINAL TITLE: Vista problems

  Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.

  Hello

  What is the exact error message related to the windows registry?

  I suggest you follow the steps mentioned below:

  Method 1:

  Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.

  Method 2:

  Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/927391

• Printer HP Laser Jet 1020 just stopped working. Maybe something to do with the spooler starts do not.

  My printer was working fine yesterday for about half of the day, then all suddenly it just stopped working. After hours of trying to understand this point, I think it may have something to do with the spooler printer not stay and "started"... Tips for troubleshooting or ideas would be appreciated!

  Thank you!

  Original title: HP Laser Jet 1020 printer

  Hello Jordan,.

  Try this Fix It from Microsoft: http://support.microsoft.com/mats/printing_problems/ .

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• The video starts for a few seconds and stops.  I think it may have something to do with the corresponding settings?  I have a Canon HF 20.  The settings are 30 PF; MPX 24; Cine mode;. MTS; Cadence 29.97Computer (PC) has 16 GB of Ram. disk space. I have so

  The video starts for a few seconds and stops.  I think it may have something to do with the project settings match & camera.  I have a Canon HF 20. The settings are 30 PF; MPX 24; mode cinema; .mts;. 29.97 frame rate;.  Computer (PC) has 16 GB of Ram. Intel7 on video; 85 GB free space-free workplace.

  I tried changing the settings in the program, although I don't think that I'm doing it correctly.  Video plays perfectly in the canon software.  Any ideas? Thanks Steve

  Pf30 soul it records progressive, but puts it as interlaced on internal memory.

  Better is to implement a project of 30 p manually as elements are likely to be interpreted as 60i

  If so, you need to interpret all the clips in the assets of the project at 30 p.

  MXP mode means that it has been saved in 24 Mbit/s.

• laptop starts to turn on and off

  When I turn on my laptop computer hp sign then turn off and on. This process keeps repeating. Help please

  Dear customer

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you're Intermittent shutdown and not power issue sometimes with your laptop

  We will surely help you with this

  According to the error message you posted, I suspect that there could be a hardware problem on your laptop

  It is possible that the hard drive on the laptop might be corrupted or it might have bad sectors

  Please perform the steps as shown below:

  1. power off the laptop

  2. turn on the device and keep tapping the button exhaust when departure upward to access the Start Menu

  3. now, here, please select as well in advance or the diagnosis tab option [F10]

  4. you should find the possibility to run tests on the hard drive and memory

  Note: Please perform these tests and post back with any error message details

  Please click on the link below to find the steps involved in running a hard drive Test

  http://support.HP.com/us-en/document/c00439024

  http://support.HP.com/us-en/document/c01443317

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• I have problems turning on my computer, sometimes I have it turn on and off the hard path of startup. Because it goes to the system again and then a blue screen. What is the hard drive?

  I have to leave my computer on to avoid having to turn it off with the power off button.  Otherwise, I have to turn on & off with the power button.  When I do that he will go to start windows normally or delete files and go to the system restore. When I hit windows normally it will go to a blue screen with the cursor at the top left doesn't Flash and that's it.  So, I press the power button to continue until initialization starts normally.

  Hello

  1. You did it last changes before the show?
  2. What is the error message/code what do you see with the blue screen?
  3. What is your operating system?
  4. Are you able to boot to the desktop?

  The steps below apply to Windows 7:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Make sure that you back up your data.

  Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Step 2) click on the link below to provide newspapers:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 3: Run a virus scan:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  It will be useful.

• laptop Dell xps l502x done 4 startup sounds and the custom of beep

  my computer laptop dell xps four makes beep continuously and then pause and then it starts to get a beep four times and then a break again and this happens without interruption until I power down my system.the screen is also blank, nothing is displayed on the screen and even the fan seems to work still vary fast.what could be the problem please help me.

  Hi reda,.

  4 beeps is an indication of insufficient memory. Please reinsert memory & check. If the problem persists, a memory at a time and check. Try the memory modules in both slots. This will help us to isolate which memory slot or memory is causing the problem.

  Click the link for repair: http://bit.ly/1e3CHca

• Blue screen on startup... problem with the display driver?

  I have been using a Dell Inspiron 14R (N4110) laptop computer since 2010 without any problem.

  The laptop was purchased online from Dell and came with

  (1) Windows 7 Home Premium 64-bit and

  2) AMD Radeon HD 6470 M - 1 GB display card.

  Recently, I had a problem where my laptop just wouldn't start, showing the blue screen every time it tries to start. The blue screen mentions a problem with the file atikmpag.sys I understand is the driver for the AMD video card.

  If I delete/rename the files atikmpag.sys and atikmdag.sys (via secure boot mode) in C:/windows/system32/drivers, the laptop (not) start, but obviously does not recognize the graphics card.

  After a lot of unsuccessful trials debugging on mine (including trying to upgrade the drivers to display etc.)., I reinstalled the operating system and the drivers provided with the original kit (just to eliminate any possibility of an upgrade that went wrong). However, I still see the issue.

  That means there is a hardware problem? or a BIOS problem?

  Thank you

  R.B.

  Guys, the problem you describe is actually a hardware failure. There is nothing you can do except replace a motherboard for laptop, or taken some advanced technicians, COMPUTING which will replace or chip GPU reball.

  I have the same a laptop similar (Inspiron N5110), with the same problems and these problems - all started yesterday. Do not waste your time, just reinstall OS, then install display drivers, which are available on the official site of Support of DELL and after that - if it's not working, just do what I said.

  Generally these are consequences of an overheating laptop, but that it was certainly not my case (I did regular checks), I could even bet on chips quality GPU, which has been used in the manufacture of this model of laptop... again...

  UPDATE: Okay, last night was a long night for me and I can confirm finally - who's * chip AMD, which causes the blue screen, you mentioned. I disassembled my N5110 faulty, armed with a heatgun, Probe temperature (probe) and tons of aluminium + some flow of brazing, I made a fairly quick reflow and the result is just what I expected - everything works perfectly again, with the same configuration - even with the same installation of Windows, which has been to launch these blue screens. There are now no blue screen at all and portable computer performance as new.

  Apparently bad welding, when this laptop was manufactured, is the exact reason why we are where we are. The BGA chip was not dead at all (it was just poorly soldered). The same story, including HP and a bunch of other companies had some time ago with these NVIDIA chips (I know, some of you know what I'm talking about).

  CONCLUSION: Integrated DELL diagnostic software is useless against the detection of defects with a discreet graphics AMD card. Problem was not in the software or drivers - it was just a poorly welded chip (I regularly cleaned my laptop dust, so overheating is not an option here).

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• laptop snowleopard 10.6.8 tried to install applications of snowleopard 10.6 up endlessly with the error.  How can I get these applications on laptop

  laptop snowleopard 10.6.8 tried to install applications of snowleopard 10.6 provided with my imac up endlessly with the error.

  How can I get these apps on the laptop

  What applications and what is the error message?