My M251nw prints a page to a page of even 15 print extremely slow

Similar Questions

• LaserJet P1102w: HP LaserJet P1102w prints EXTREMELY slow by Wi - Fi

  I was struggling with this problem for a long time, but today it completely freaked me. I was ready to throw this piece of... printer!

  Problem is simple. When I try to print something wireless with graphics (jpeg or pictures images) to my iPhone, the iPad iOS 8.4 or the MacBook OS X 10.10 Yosemite, it takes forever! Document Word, PDF, preview or other programs - same result! I couldn't pring 9 pages today, after that 20 minutes, I gave up.

  What is going on. Let's say I'm on mac. Special print goes to the queue of the printer, as usual. After that, this task shows in the queue as 'connection to the printer', green light flashing on the printer, as usual. It takes a minute or two, it's this that unusual. After that, "printing page 1 of departure." This can take 1, 2, 3 minutes... forever! Then a page prints in fact (for 5-7 minutes at this stage brand) and it takes time even to print page two and so on, or (probably) it will spit the unfinished page (only two or three inches printed and the rest of the page is empty) and displays an error flashing light orange. UGH!

  I gave up on iPhone/iPad it long, since they can't see the print queue and it is the unpredictable result. You can wait 10 minutes for your document, and then leave and then just find the document printed when you no longer need (or half of the document).

  I don't have this problem when you print any text, emails, simple confirmation of safari pages and so on. Only when printing document with pdf graphics or heavy. I don't have this problem when you connect the printer via the USB port (discovered this today). Now what really bothers me, is the fact that I actually could print heavy machine PDF Windows without wireless problem (I had exact problem even print document from my mac). What is going on?!

  I googled this problem and found that I am not alone. I've updated all the software and firmware, I tried to reset everything - No. DICE! It's really very frustrating. I thought that this is because of the memory of the printer, but why it works perfectly via USB then?

  In any case, it is a cry from the heart. Help, please. The printer is good, but unusabe in certain situations.

  Hello @Ivan4!

  Welcome to the community of HP.

  I hope you have a pleasant experience here!

  I want to help you with slow printing that you encounter when you print images of your HP LaserJet P1102w wireless of your Apple devices.

  I thank very you much for the detailed description. Because the printer is able to print fine wireless windows machine, we know that the issue is not with the printer or the communication. The fact that none of the Apple devices are able to print wireless images without being really slow, leads me to believe maybe it's a problem with the AirPrint driver or the Hello protocol that your Apple devices use to communicate information.

  Image files are much larger, and much more data needs to be transmitted, so it is normal for them to take longer to print than a regular text document. However, if there is a marked difference in speed between the Windows computer and Apple devices, then the question is probably not just the files are larger.

  I want you to make sure that the printer is installed with the driver on your Mac. (Because there is no feature complete HP software available for Mac 10.10 operating system will often default to the AirPrint driver)

  1. Click on the Apple icon on your Menu bar.
  2. Select System Preferences.
  3. Choose Printers and Scanners.
  4. Select your printer and press the (-) button at the bottom of the list to remove.
  5. Select (+), and then click Add printers and Scanners. (NOTE: do not select the printer in the list of printers nearby as this will often use the AirPrint driver automatically)
  6. Select your printer (one that shows multifunction Hello under 'Type').
  7. At the bottom of the window under use: does say AirPrint? If so, click on the drop-down list , and you should see a specific driver for the printer. Click on Add.
  8. Try to print a picture once again and let me know the result.

  If it works to solve the problem, then I suggest downloading the HP ePrint app on your iPhone / iPad to print. It may be a problem of incompatibility between the AirPrint on your Apple devices and your router.

  I look forward to hear from you and work at a resolution of this problem.

  

• Printing Office Jet Pro x 476-extreme slowness

  From one day to the other, one of our Office Jet Pro x 476 begins to print EXTREMELY slow. There are no recent changes on the computers involved, I just noticed that all 4 cartridges are close to being empty (black to 25%, rest about 20%). There is no other problems with this printer and it still prints high quality without another problem (smear,...), but it takes more than a minute to print 4 pages (no matter if I print a letter in black and white or a photo in high resolution with all the colors).

  You have a new printer, the problem is solved.

• HP Deskjet F380 print really slow and ejects incomplete pages

  Hi, I have a HP Deskjet F380 all-in-one. It worked perfectly for months until this one day he started to have problems when printing. When I hit the button "print" the printer take too long to print and it is extremely slow, it prints a little then stops (20 seconds or more) then print more. Also my printer ejects often empty or incomplete pages. I tried different solutions. (1) uninstall/reinstall the driver for the printer 2) disable my firewall and antivirus
  4 reset the printer (unplug the printer power cord ecc..) 3) open the printer to check if there is something blocking the internal components 4) remove and reinstall the cartridges, clean the contacts of the cartridge and check the ink level 5) try using a different power supply from another HP printer. Nothing has fixed the problem. I ran HP print and Scan doctor but the test found no errors. I also tried to unplug the usb cord and print a self test page (press the button cancel + copy color button), but it won't work, so I have deduced that there is a problem with the printer and the questions were not related to my pc.
  I am running Windows 7 64 bit

  Any help is very appreciated!

  I solved the problem myself. The black ink cartridge was defective, I replaced it, and now my printer works perfectly!

• How can I "Print booklet" with just strange pages and even copy double-sided. . options disabled

  I have InDesign CS5.5 on a Windows 7 64-bit machine attached to a Xerox 7750 printer.  I created a portrait 8.5 x 11 paper and trying to create a booklet on 12 x 18 sheets.

  I need manual duplex printing and so I need to print only the "spreads" weird and then the "spreads".

  I printed in Adobe PDF format and printed my created PDF file and have it work, but I want to know why InDesign doesn't let me do.  When I click on "file > print booklet > Print Settings ', and then it displays the dialog box to print the Pages section, which includes the sequence that normally would allow me to do the odd Pages or even Pages, but it is disabled.  Why?  I can define print presets and I choose odd Pages, but when I choose that Preset area it shows nothing, everything is always disabled.

  Anyone has any idea why it is disabled?  Is it my printer driver?

  You are doing the right thing by printing to PDF and manually duplexing it.

• LaserJet 2100 - multiple pages feed even after roller and separation block replacement

  Hello

  I have a old and, up to now very reliable LaserJet 2100.

  After experiencing a few problems of collection of papers, I replaced the power rollers and separation for the MF tray and the main tray buffers. Each tray pickup seems to work well and always takes a single sheet at a time.

  However, what power from the main tray (bottom), often (but), a second sheet will be in the printer to receive AFTER the first leaf has been picked up and transplanted (that is, the end of the page has entered the printer). It's almost as if I print a multi-page job, even if it's a single page (that is, the regular test page). The first page comes out of the printer normally and then the printer stops (paper jam error) with an inch or two of the second sheet comes out of the output slot.

  With the covers off the coast, I see that the solenoid is it undertakes to allow the feed roller to bring in the first page, but remains often engaged a bit too long, so a second sheet is picked up * after * the first sheet is completely picked.

  The maintenance manual enamels on the use of signals from the sensors in the paper (or for that matter, even where they are), so I'm a bit lost as to how to solve this further.

  Any ideas?

  It is a problem on older printers. Your question is tray 2 pickup solenoid that controls the movement of the roller from tray 2. It is very difficult to access, and you will need the maintenance manual. What happens when you send a print job the main gear assembly rotates and the solenoid which controls the roll tray 2 active and moves his arms 'L' to release the roller and then turn off the power to the solenoid and the arm of 'L', which is spring returns to stop the front roller it can turn again. HP has used a material damping on the solenoid to calm the activation of the solenoid clicking noise. Over that time off and all that remains is the glue that held up. When the solenoid activates arm 'L' hit the Center and glue residue prevents the arm of his return in time to prevent it from stopping the roll and therefore another sheet is fed. You need to access the solenoid which is behind the main landing gear on the right side. Takes a lot of work and you will need the maintenance manual. Once you have access to the solenoid, you remove, unhook the spring and remove the arm of 'L '. Then you clean the residues of glue on the edge of the coil and everything on the arm of 'L '. You then ask a material felt on the edge when you remove the glue. Put everything back together and it should work another 12 years without problem. Good luck.

• Is it possible to start Firefox without having to open any page, not even a blank page?

  Just curious. Is possible to start Firefox 4.0.1 without opening any page, not even a blank page?

  No, you can hide the tab, if there is only one tab open, but it's not good to do.

  Perhaps if you explain why you don't want a blank tab, maybe we could have a nicer-sounding answer, if the answer is still no.

  What I don't like in Firefox 4, which is a blank tab ("" subject: vacuum "") presents itself as 'New tab' which is incorrect, once you do another thing the former title on the tab before 4.0 was more correct and it was in parens so he showed better as "(sans titre) ' on the close tabs and is correct, because it has no title."

• Extremely slow in all directions. Typing, loading, handling and even just scroll to the top of the page to the bottom. Is getting worse. Frustrating Maddingly! Help!

  Firefox has been extremely slow. Typing, loading, search, even just scroll to the top of a page to the bottom. My daughter had the same thing happens to sound and had to get his computer disassembled and full recharged. I don't have this option. He doesn't have a virus and was completely free of anything that might slow it down.

  This has happened

  Each time Firefox opened

  Is a month ago. It is getting worse.

  Hmm... try to download the last version... but if it doesn't, then try Safe Mode. Do not know what could be causing it...

• Extremely slow scrolling of Web pages on Tecra M5

  I have a Tecra M5 and on the web pages, when I'am scrolling, it is extremely slow and the photos roll up like blinds.
  What could be the problem with that?

  And how do scroll you? Do you use an external mouse or scrolling on the touchpad?

• whenever I click on the link for creative cloud, it takes me to the download page. Even when I reenstall, the link still tackes just me draft.exe page. Can it be planned.

  I have an account that I have lightroom & camera shop. I used all 3 for more than a year. But now.every when I click on the link for creative cloud, it takes me to the download page. Even when I reinstall, the link still takes me right to the download page. This can be corrected.

  I fixed it by removing all the programs. Then I have them re-installed

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• HP all-in - One C7280 print super slow... same test print windows

  My C7280 was good wireless printing... I have since moved the printer in another room, which is right next to my wireless router and now it prints super slow.  It takes minutes for a black and white page.  It almost seems that it is printing on very high resolution and prints 2-3 lines then pauses then prints a little more and takes over the ground.  Any advice or ideas is appreciated!

  It's like the thing as being too close to the wireless router, try to move at least 15 feet away.  Also, just turn and then again, sometimes, which erases the slow printing.

• PSC 2110 all-in-one now prints VERY SLOW

  Maybe I just need to bury it, but my psc 2110 started extremely slow printing - 15 minutes for the align cartridges page, 17 minutes for the 'self-assessment report.  So, it has nothing to do with the connection between the printer and the computer (these prints are of the printer itself).  I tried unplugging everything, wait, and plug it in; Remove and reinsert the ink cartridges; align the print cartridges; Download the HP printer utility (who reported "No problems found"); looking for an update (it says I have the latest).  Any ideas?

  If the printer prints a swath, and then pauses for 15 seconds before the next broke then probably the issue is one of the ink cartridges has failed.  If the PSC 2110 is capable of printing mode reserve (with one of the removed cartridges), then you can remove a cartridge, print something, then replace the cartridge, remove the cartridge else and print something.

  Whatever that cauese cartridge the printer to print slowly is the culprit and should be replaced.  If the PSC 2110 does not support the mode of the reserve, then you will have to use trial and error to find out what cartridge is at fault.  I would like to start with the black cartridge.

• DeskJet 3700: DeskJet 3700 prints very slow

  Hey everybody,

  I just installed my 3700 DesktJet on my 10 Windows PC and it seems to print really slow. Any idea?

  Thank you

  Bill

  Hello

  I have experienced this problem myself.

  There are a few things you can try

  1. Check the type of default paper for the printer, go to settings, click on the print properties and make sure the paper type is plain paper
  2. Run windows update to ensure that you have the latest version of the printer driver.
  3. Take a look at this document (http://support.hp.com/us-en/document/c05272556)

  I hope this helps

• Printer has slowed in the print queue

  Original title: the printer has slowed during printing that

  Over the past two days, print PDF jobs slowed much.

  Hello

  1. what version of Windows is installed on your computer?

  2. What is the number of brand and model of your printer?

  3. have you made any recent hardware or exchange of software on your computer before this problem?

  4. you receive an error code or error message?

  5. do the same thing happens when you print other documents/files?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  I also suggest to follow the below links:

  Method 1:

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.