My MBPr takes about 30 minutes to start

Similar Questions

• I have a HP G62 with Win 7, takes about 10 minutes to start,

  Takes a long time to start, think it might be a problem with hd, so got another, samething happened. Reinstalled old hd and restarted without the bat and it starts fine, rebboted with batt in and it was slow again... restarted with the stick and it was slow again... did this several times. A bad mattress would do that?

  While it seems strange that a bad or low battery could cause the problem, I must say that it is possible. A few years back that computer laptop of my brother would not boot at all with his bad battery and removed the battery and it booted right up. Replace the battery-everything was good.

• Satellite P850 take about 4 minutes to start Windows after the Welcome screen

  Hey

  My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

  Any help or idea?

  thx a lot

  Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
  4 min to complete the startup process is really long
  Have you installed an antivirus software? Maybe a Norton Antivirus?
  I got this software installed on my laptop and it took an eternity to boot the system.
  I replaced Norton Antivirus with free ware software called Avast!.
  Now the Windows starts for 30 sec

• Windows 7 Home Premium x 64 takes about 40 minutes to start. Web browser takes 12 minutes to appear, another 15 to load my homepage.

  HP p6520F

  I can provide all other necessary details. I did the steps from startup to boot, I've updated all rivers for my model, which are available from HP etc. I did complete relocations, but this slow extreeeeme problem won't go away. Help, please!

  HP provides all diagnosis, available, perhaps from a shortcut key when you first pwr on?

  HD machine will also have a bootable disc, free check utility

  A bootable memory test, www.memtest.org

  No doubt you have also scanned for viruses/malware

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Malwarebytes.org/products/malwarebytes_free

• Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!
  Help!

  You can read this:
  http://www.Vistax64.com/tutorials/81176-speed-up-performance-Vista.html

  t-4-2

• Start-up phase takes about 10 minutes for bot

  of course I changed something on my departure upward. now, it takes about 10 minutes before my office show upward. When I turn my computer on my screen is blue, almost black, and I get a dash flashing (-) in the upper left corner. it flashes for about 10 minutes. before he finally start. Help!

  [Moved from comments]
  

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems when the computer starts.

  1. what operating system is installed on the computer?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Check if the problem is caused by some faulty devices on your computer. I suggest that you disconnect all external devices except the mouse and keyboard to your computer and check to see if the same problem happens.

  Method 2: Try to run the troubleshooter of Performance:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 3: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  (For Windows Vista)

  Method 4: If the question does not exist in Mode safe mode then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  More information: Optimize Windows 7 and Vista for better performance:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Please follow these recommended steps and post if you still experience the problem.

• Startup takes about 5 minutes to complete to start on my HP laptop.

  Desktop loads upwards just fine, fast, straight bar tool with the exception of the Wi Fi Connected icon, it takes about 5 minutes to appear, this time on that hard drive lite is a little hard. If you tap the icon on the tool bar network bars she says you are connected. If you try to open something out of the Office during that time, he just sits there watching waiting for you to start to complete. Once starting over thing work fine, that too, if you plug in a USB key during the startup time (5 minutes), you hear the sound that you always hear when you plug one but it doesn't appear in Windows Explorer until after 5 minutes of waiting. I did a system restore to a moment where it was sunny and that did not help. I ran a defrag on the C drive, I ran a disk check, with no errors found. I look in the task during this time Manager, and you see no programs running. I run Malwarebytes and Super Anti Spyware and nothing detected. Can someone help me with this?

  Hello

  Welcome to the Microsoft Community Forum.

  I understand that the process of starting your computer is slow. Let me ask you a few questions to better understand.

  1. What security software do you use?
  2. You did it all meaning hardware or software change?
  3. You get the error message? If Yes, when and what is the exact error message?

  I suggest that you perform a clean boot procedure, and then try to install the add-in.
   
  See the link to perform the clean boot.

  Method 1: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Important: Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  Note: See " " How to reset the computer to start normally after a boot minimum troubleshooting "to prepare the computer to start as usual after troubleshooting. "

  Method 3: Optimize Windows performance

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  Method 4: You can use the provided patch below it article and check if that helps to solve some problems.

  http://support.Microsoft.com/mats/slow_windows_performance/

  You can also see the article: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419/en-us

  Please come back if the problem persists, we will be happy to help you further.

  Thank you

• L20 - 264 takes about 10 minutes to stop

  Hi my L20 - 264 is very very slow when stopping down, standing or hibenating.
  Select start/turn off computer he can takes about 5 minutes to bring up the options bar. Of and then selecting turn off for example then pick up another 5 minutes before the laptop actually powers.
  There is no software hogging the system because I've been surfing or play media files.
  Is due to the fact that it has only 192 MB of ram, because I thought the upgrade anyway. Or I am barking the wrong tree?

  See you soon

  Hello

  I agree with Jonathan

  A little more RAM can be very good, and it can make your device faster and more flexible. I recommend you to check all active running process. Generally, many of them is absolutely useless, but they can slow down the system quickly especially if the device does not have a lot of RAM.

  I recommend clean up the operating system, use the Defragmenter tool and check applications that start with Windows. Many of them may be disabled. Enforcement antivir may also slow the operating system currently running. Check all this. I hope that your device will work better.

  By the way: the compatible memory module for your device are
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  Good luck!

• My Satellite is really slow and takes about 10 minutes to open a session

  Hello

  My satellite phone is really slow and takes about 10 minutes to open a session. It also takes awhile to open up applications in particular the internet. Once the internet is open, it takes a while to access the net. The application actually drags across from the scene and it looks like a curtain closing additional idling.

  Need help.

  Concerning
  Russ

  Hello

  Have you checked the CPU usage rate?
  Start the Task Manager and check if any strange background process needs the full CPU performance.

  I also recommend to check the laptop for some viruses and malware. These programs could make the laptop and the lazy BONE.

  However the portable equipment could bad work.
  You should check the memory using the Memtest86 program. It s freeware. Check the HARD drive for bad sectors and also try to defragment the HARD drive!

• You try to transfer data to new computer, takes about 30 minutes to collect data, and then told me that it will take 33 + hours of transfer

  I have 2 PC, two 40 g X 2 g, an old score about 12 GB of data, 71% free, new is ready to receive. When I make the connection with a null cable and start, it takes about 30 minutes to put together and start the transfer, but it gives a transfer time of 33 + hrs and that means, I let it run for about 6 hours, and he was always less than 6% of fact. No games or large, larger files is about 12 MB. Any help? Bob

  If cable "null", you hear a serial RS-232 cable, you probably chose the slowest method of data transfer possible.  A serial cable tops out at raw data of 115 Kbps (115 000 bits per second) rate the most current Ethernet 100 Mbit/s connection - is about 1000 times faster.

  I don't know why some s/w you use takes 30 minutes to "collect" information before starting the transfer, but if you have about 12 GB of data (and don't have / want an Ethernet connection), why not just get a big enough USB.  You can get a 8 GB USB key for less than $15 and a 16 GB for about $20.  If you have USB 2.0 (which is likely, unless your old computer is older than 10 years), the maximum raw data rate is 480 Mbps with rates effective data around 20-30 MB/s for the memory sticks.

  At 20 MB/s, 12 GB should be transferred in about 600 seconds or 10 minutes.

• It takes about 6 minutes for the computer to boot.

  * Original title: Windows 7 Starter

  It takes about 6 minutes for the computer to boot. I mounted early and disabled now needed to start programs.

  If it were my system:

  1. I'd be more suspicious of malware, run ADWcleaner and have a good program antivirus https://toolslib.net/downloads/viewdownload/1-adwcleaner/

  2. I would like to delete all programs that claim to make it work better, safer or faster computer.  The vast majority of them is actually malware

  3. I remove any "protection" software on your computer and let the only Antivirus product quality - more below...

  4. I would use the manufacturer of my disk drive hard testing program to ensure that it is not a failure

  5. I would like to be sure that none of the drives are more than 75% in use

  6. I would check my memory using the auditor memory Windows 7

  7. I would like to install and run Autoruns to check what is in the startup process

  8. AND, above all, focus on the applications installed.  Some of them are notorious resource hogs who insist on running at startup.

  9. I would like to delete startup programs/applications, unless I really need to start

     Common unbelievers that cause slow-start ups:

  • Garmin Express
  • Roxio anything
  • Skype
  • uTorrent
  • FrostWire
  • Trusteer
  • Dropbox
  • OneNote
  • EverNote
  • All Apple products
  • QuickBooks
  • Spotify
  • Pandora
  • AOL desktop
  • Some games, especially online ones

  What Antivirus buy?

• 64-bit Windows 7 system takes 10-15 minutes to start

  I had the same install of Windows 7 on my desktop since 2009. The Office has faced a lot of hardware upgrades. I replaced the video card three times, the main hard drive once and last year updated card motherboard and CPU. That the last change in particular has many victims, adding 3 or 4 minutes to start time.  I'm looking for more than 10 minutes when I hit the power button when the Office has completely loaded and the system is usable.

  A few months ago, I reduced my startup time of 15 minutes to 9 minutes to uninstall Avast (that I replaced with Windows Defender). However, it has been creeping upward again. In recent days I uninstalled a lot of old software, cleaned my temporary files, used CC Cleaner to solve some problems of register and clean unnecessary files more and used the Autoruns utility to eliminate many services and drivers that I need not running when you start Windows. I did not notice an improvement in startup time; in fact, it seems slightly less good, but maybe it's my imagination. In general, it takes about 6 minutes to get to the deskop visible mission and another + 5 minutes for desktop computer to be fully charged and all usable.

  I have a software minimum run at startup: Windows Defender, DataColor SpyderUtility and Realtek HD Audio manager.

  This is my work computer and I can't save 40 hours or more, he would have to reformat the hard drive, reinstall Windows, download all updates for Windows, download and install Adobe Creative Suite, Studio Android, Android SDK, Git, Mercurial, FlashDevelop, the AIR SDK, Eclipse, MAGIX Music Maker and many other utilities.

  I can provide the newspapers that might help troubleshoot the root cause of the problem, let me know which. Since the upgrade to a Gigabyte P55M-UD2 and i7 - 860 a MSI Z97 - G45 and i7 - 4770 k triggered my startup time of 4-5 minutes, I feel like it would be a good place to focus first. I imagine that there is some driver issue or a similar problem, but have been unable to diagnose on mine.

  My system:

  Windows 7 Home Premium 64-bit

  Card mother MSI Z97 - G45

  I7 - 4770 k

  16 GB OF DDR3 MEMORY

  ASUS GeForce GTX 660 2 GB

  Hard drives:

  C: Western Digital Caviar Black 1 TB 7200 RPM SATA 3.  268 GB free.  Operating system installed on this drive

  F: old 500 GB Caviar Black SATA 2.  He is a backup drive, no software installation, I do it manually backup there is no backup running software. 22 GB of free

  G: same model of car than C:.  This is mainly used for storage. Some games are installed on this subject, but they do not start when Windows starts

  No partitions on any drive. All readers 0% fragmented

  TLS

  If please install the following and set it up for fast start

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• Roxio takes about 190 minutes to compress my dvd for burning, is this normal?

  Time to compress the video

  I have a laptop Dell Inspiron N4110 Win7 professional.  The laptop uses a dual-core Intel Pentium B940 / processor dual thread clocked at 2 GHz with 4 GB RAM and 200 GB of free space on the hard disk.  I am recording video analog (NTSC) and stereo audio to aid Easy VHS of Roxio hardware to DVD / software package.  Video is scanned in real time by the A/D converter.  A 100-minute VHS video produced a mpg of 6.13 GB hard disk file.  The compression process of Roxio to shrink the file to mpg of 6.13 GB less than 4.7 GB for recording on a DVD + R single takes about 190 minutes.  Is it a normal time for my laptop?  Are there other programs of compression that would be much faster?    Would be a better laptop with an Intel quad core / 8 processor i7-2860QM thread and 8 GB of RAM to reduce the significant period of time compression, for example less than 60 minutes?

  DVD-video is encoded more time-based
  as the size of the file. Compression is not necessary.

  A video file of 100 minutes should fit on a 4.7 GB DVD.

  Have you tried Windows DVD Maker?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

  The following freeware can also be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in most
  free-standing DVD players... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  To allow a longer time on the DVD... left click the
  The project settings button / select video / open the target
  Bitrate of drop window. Choose a will more small number
  result in a longer time on the DVD. Press on... Accept.

  The vertical bar to the left of the screen will tell you
  How much compression you need.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  software advanced as Sony, Cyberlink, Nero, Roxio,
  Adobe, Ulead, etc... but at least it is a start.

  Good luck.

• We know the answer slow printer. We use XP and it takes about five minutes for the printer to answer.

  We know the answer slow printer.  We use XP and it takes about five minutes for the printer to answer.

  Hello

  1. have you you can all changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. have you updated the printer driver?

  Try to run the fix it tool in the following article and check.
  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

• HP Officejet 5610 all-in-printer decided to take about 5 minutes to print or copy a document to a page.

  I have a HP Officejet 5610 all-in-one-3 years.  My printer decided to take about 5 minutes to print or copy a document to a page.  Can anyone help?

  Original title: impression of the printer

  Hi Phyllis,

  I suggest you follow the steps in the link given below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Brief us with the State of the question. We will help you to come.