My mouse works differently

Similar Questions

• I want to get comp.mouse working again, was using the usb port.

  damthisthing

  I would like to get COP mouse works again

  Hi frankdnls640,

  (1) remember you to make changes prior to this problem?

  (2) what is the number of brand and model of your computer (and mouse)?

  Method 1: If it's a USB (Universal Serial Bus) mouse, unplug and reconnect the mouse into a different USB port and then check to see if it works fine.

  Method 2:  Using the keyboard, run the fixit available in the link below.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Microsoft Bluetooth Wireless Laser Mouse works, extremely, annoyingly slow after change of motherboard out sometimes.

  I have problems with my motherboards.  I installed originally a jury of six core AMD Asus but discovered that the sound circuit on the Board picked up the RF of six hearts.  So I changed it to a Biostar TA890FXE an AM3 Board with 4 PCIE slots.

  This map may contain 4 Pcie, but has only 2 16 x slots that are white in color for Crossfire.  The other 2 Pcie are for the slower cards.  I have my card installed in slot 1 PCIe 16 x

  Since I was a boxed version of Vista Ultimate 64 bit the replacement of the Board of Directors has gone well with without a hitch, except for this problem.  The darn wireless mouse keeps presenting a significant delay from time to time.

  I upgraded to the latest BIOS and also found that a USB Joystick was also causing problems until I uninstalled the ATI Radeon drivers several times.  I have uninstalled/reinstalled all drivers USB again and again.   I even upgraded from 8 GB to 16 GB of ram Corsair and the thing does not run any faster (except for loading video in an editor) than my Asus M4785M with 4 GB ram.

  At first, I figured the card Radeon 4650 diamond with 1 GB of ram, when I ran FSX I got frequent black screens between refreshes.   When the aircraft was in its window the mouse lag so I moved it into the box with the graphics.  I could move it very quickly from time to time but not always.  As soon as the mouse has crossed the border of the FSX menu in the aircraft selection menu, the LAG would begin.

  Strange however, I also have the Microsoft Bluetooth Entertainment 7000 keyboard and it has a built-in mouse pad.  So when I got the offset of the wireless mouse I found that the mouse pad, keyboard do not show it.  Of course, a lot of batteries have been tried.  I have also a key 3G modem and the thought that maybe the RF frequencies could interfere with the bluetooth transmitter, and yet the mouse KEYBOARD pad worked fine all the time!

  At a point of the USB ports on the front of my PC failed suddenly and I used the port in the back instead, as the 3 g modem suddenly was cut.  He started upward once again connected to the rear port, but he chose all of a sudden another 3G network, spend roaming, something that isn't supposed to

  occur.

  So it seems to be a USB problem.  I double checked the connectors on the front panel plugged into the motherboard header, but it was close.  I removed it and he exchanged with a rear slot spare USB cable I have no problems. I even swapped the transmitter Bluetooth of the rear USB ports in the front and vice versa, and these problems went away.

  Yet from time to time, there will be a sound of loading the disk heads and there will be a lag on the mouse and it flit on the screen itself.  I removed all the USB drivers and mouse drivers and drivers of keyboard without result, I then plugged a wired keyboard and mouse while the USB was plugged in and waited.  The wired keyboard had built in the trackball, so I couldn't move around as fast as Bluetooth, one mouse cursor and again, I got the mouse slows down from time to time.   Most of the time is when a noise was heard from the hard drive.   I turned off Superfetch to listen to the record and it made no difference.

  I left the PC running on its own after turning off any energy saving features and when I came back to it, I finally found that the keyboard was a lag now, too, I had to wait about 30 seconds for something to wake up until the keyboard is recognized.   It seems that it is the same problem that mouse, but at a later date.  I then re active features and screen saver and keyboard lag reduced significantly saving energy.

  Then, once, I got a huge amount of lag when Google open white paper screen, the mouse cursor wouldn't move at all for a long time or erratically.   In this case, I thought to 'pull' the wired keyboard and the trackball at the back of the card, and the problem immediately disappeared as if there were conflicts.

  However, this did not last long, and about an hour later, the mouse pointer lag appeared.  Don't forget this mouse worked fine for a year on an Asus card and withdraw it very well.

  My next attempt with the Bios, and it happened unexpectedly.  This motherboard has a utility to start Bios screen where I can put my own splash screen and no the Biostar on a difficult start.  So I did and all of a sudden all the problems cleared up!    It was as if something in the Bios was hung in, and then there is this whim of hard drive noise and once again, lag lag lag on my mouse.   With 16 GB of ram and 1 GB of video ram?  Just to not use the Aero's office, no sense at all to me.

  Tried to contact Biostar for 12 days now, no response.  Have the latest drivers for vista from windows for the keyboard of entertainment and mouse, service pack 2 for Vista and a 1 TB hard drive, 500 watt antec PSU, problem occurs with or without overclocking.

  Anyone?  Anyone?

  AMD Phenom 2 1090 t black edition 3.2Ghz

  HD4650 diamond! GB

  Corsair XMS3 DD3 x 4 1066 4 GB

  1 TB of Seagate SATA

  Antec 500W PSU Green

  Note: This map has a header of a CD rom, but also the DVD Sata PATA

  Latest

  I could no longer the transceiver Bluetooth 2.0 with the mouse and keyboard.  I went to a keyboard and a wired mouse again.   Then a few days later I decided that I would plug the transceiver Bluetooth 3.0.  This time it installed fine even if I had uninstalled the Intellipoint software.   I went then to the receiver Bluetooth 2.0 and it didn't work anymore.  I did a reboot between the two, and suddenly I saw a Microsoft update will appear at the bottom right of my screen.  I left it to update, and then he said that I could connect other bluetooth devices other than my keyboard of entertainment game.

  Well, this is not true at all, for the entertainment keyboard transceiver pairs automatically.    Yet, this message appeared.  When I went into the control panel to verify the situation once again, I found that there is no Bluetooth icon.   From what I've read on other Vista users using a transmitter of 3rd Bluetooth part, it seems that the Bluetooth stack has disappeared because I mixed the two Microsoft Bluetooth transceivers.    Something else occurred as well, it reminded me of moments where I would install a new installation of Win98 and some drivers as the main card drivers were not yet installed.  He will have to restart the system and over and over again for each driver be seen, and if we were out of sequence, should be made to remove and start over again until all have been installed.  In this case, it seems to be the same kind of priority when it comes to the way in which the Bluetooth drivers are installed.  When I removed the Bluetooth 2.0 transmitter/receiver and replaced by unity Bluetooth 3.0, I seem to have rid one of these priorities, let the program update that must have been stuck in the pile of pilots, how the keyboard and the mouse works perfectly now.

  With 3 wireless transmitter that is I can no longer use the Bluetooth 2.0, one all the more, I plugged it in different USB ports and we saw him, but it was not enough to cause any installer to appear.   It's as if they are reticulate together now, and I can no longer use the add a device feature.   Even if I add the second transmitter/receiver, it is simply ignored.

  Since then, right now I have no need of an additional feature and the keyboard works very well, I'll keep this configuration until I have to reinstall the motherboard still when I start then a clean Vista install.  Unfortunately the new motherboard that I received does not work as I had hoped it would be, not that it would affect the situation above, that's simply not what I was told it was, and I plan to return it the manufacturer once more.

• Microsoft Wireless Keyboard 800 & 1000 mouse, work intermittently when connected to my new PC, but work very well on my laptop also under win7

  I recently got a new PC and my wireless keyboard and mouse combo made by Microsoft have not worked properly on my new computer. Sometimes, they work fine then other times it's like the keyboard and mouse cuts in and out, make miss me not type letters or the mouse past on the screen. They work fine on my old laptop that runs windows 7 as well. I reinstalled the drivers with those newer. I disconnected all my other stuff without wire and the problem persists. I plugged into different USB ports. I'm only a 1 m from the PC. I have no idea wat the problem would be, but I can assure you that keyboard and mouse work perfectly on my laptop.

  Thanks for any help

  Hi Sean89dunn,

  Method 1
  I suggest you try the steps from the following links:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Method 2
  If the steps above fail, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Are the key shortcut supposed to zoom to work differently on mac and pc?

  Hello, I use a mac at work and mouse control + SPACEBAR zoom functions as I do in Photoshop and Illustrator

  which means that if I hold down the command + SPACEBAR and click and drag the mouse left/down he's going to zoom out with fluidity (in function of time how I drag the mouse) or alternatively if I click on dragging the right mouse / upstairs he zoomed in.

  This works also perfect fo me I Zoom in and out a lot and combined with the space bar for the hand tool, I find that it is usually the fastest way to get to where I need to be on the artboard.

  Recently, I installed the applications at home on my PC and find the zoom works differently, and I often need many more orders key/mouse to do the same thing.

  In photoshop if I hold alt + space + mouse drag so he's going to draw a rectangle around and zoom in it.
  If I hold the ALT + space + mouse it click zoom out one step, or ctrl + space + mouse on it zooms in one step.

  In illustrator so I hold CTRL + Space + mouse do zooms in the box of

  CTRL + Space + mouse click will zoom in and ctrl + alt + space + mouse click will zoom out.

  
  It seems crazy in the PC I need to hit twice as many keys or to make additional orders to arrive there where versions would be in a single action on the mac.
  Programs are designed to work that way on the PC or is it something to do with my setup? Is there a setting somewhere in the preferences that need me to put in more dynamic market zoom in/out functions?

  It should work on mac and pc.

  Your version of windows, select the Zoom tool and make sure Zoom Scrubby is checked in the options toolbar.

  If your not able to check it out, make sure that use graphics processor is verified in Edit > Preferences > Performance.

  

• My wireless mouse works fine everywhere except in Mail. It is simply not to scroll or work at all.

  My wireless mouse works fine in all applications except Mail, where it does not at all. It is altogether we els and absent when I try to use it either as a pointer to a specific e-mail or use it to scroll. It simply is not there. What gives?

  Please could you tell us what operating system you are using.   It isn't iOS with an iMac.

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?

• After the upgrade to 27.0.1 do not scrolling the mouse work.

  System Windows 7. In Options > general > browsing checked AutoScroll use & use of smooth scrolling.

  Hi Vadia,

  Thanks for posting your question, and I'm sorry to learn that your scroll has stopped working. Please check your control panel to see if the mouse works properly * while Firefox is open.

  Also, please try to disable graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

  Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

  Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

• Satellite U300 - only the external mouse works via USB

  My touchpad has stopped working. I tried to reload the driver, reset the settings via the control panel and checked the Fn F10 button. My external mouse works via USB and I have not activated the button ' disable when the external mouse connected "(and even when the mouse is disconnected the touchpad still does not work).

  Any help would be appreciated. I don't know that I missed something very simple.

  Hey Buddy,

  > checked the button Fn F10
  It is the combination of bad for touchpad keys. You must press the combination of keys FN + F9 to toggle the touchpad.

  Check this box!

• text of ring works differently developing end vs ex environment?

  Hi all
  The text of the ring somehow works differently in the environment vs development exe
  environment.  I can't understand why.
  I have attached the vi of the façade and the block diagram.

  Basically, I want to remove the text/number in the text of the ring after I used it.

  It works in the development environment, but not within the exe. I tried
  different ways.

  It is a Subvi, so I'm only including the Subvi.

  The second accessory is were I'm trying a different way but the result is the same... exe works only in the development environment. The text or number in the text of the ring is not removed in the environment of the exe.

  Hi all

  I solved the problem. It works somehow, (removal of text on the text of the ring in the environment of the exe) on the 2013 Pro version, but not in Pro Version 8.5 of LV. I don't know if it's a software bug?

• Keybourd & mouse works do not after Windows R2 2012 starts

  Dear,

  I have connected to 4 Server KVM switch same brand same specification, all servers are with KVM normally, 3 days before one of these servers do not work with KVM over. I try to use directly connect the keyboard and the mouse, but the same thing, no driver detect for any keyboard and mouse. I'm trying to install the driver for mouse & keyboard, but nothing works. Keyboard and mouse work in bios, but when to start widows is no longer works. Work normally USB port for USB stick or external HARD disk.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• my wireless mouse works system restore not tried, but he did not correctly run because of an unspecifed error

  my wireless mouse works system restore not tried, but he did not correctly run because of an unspecifed error

  [Moved from comments]

  Hello

  1 Windows operating system is installed on the computer?

  2. What is the brand and model of the mouse?

  3. What is the exact problem that you are facing with the wireless mouse?

  Method 1:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update mouse drivers and check:

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  If you use a Microsoft mouse, then follow the steps in the article:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122#top

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Iconia w500 reset stuck at "Create an account for this PC" during windows install only mouse works

  I have the Acer Iconia W500 we have upgraded to Windows 10.  Due to the assumption of updated driver, I decided to reset the tablet.  I have reset the system without discs and then installing Windows, that the computer is blocked "create an account for this PC' because the USB mouse works.  I discovered that the touch screen and a keyboard are unusable during this process so I plugged a USB mouse that works very well.  But installing requires that I type a user name, and it won't let me skip this step.  Without keyboard or touch screen, I am unable to enter a user name in the field.  Thank you for your suggestions.

  Plug a keyboard instead of a mouse, you can tab between fields to be able to live without the mouse. If you do not have a practical USB keyboard, check the local thrift stores. They are generally very cheap there...

• I changed the batteries in the keyboard. Mouse works but the keyboard does not work.

  I changed the batteries in the keyboard (wireless laser 4000 desktop computer), the mouse works fine but cannot type on the keyboard. Any ideas? Thank you

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

  It will be useful.