My new installation does not print anything! CD Player installed on Mac. Help, please.

Similar Questions

• Estation c510a: replaced C510 printhead to no black printing, now it does not print anything!

  A few weeks ago, my printer started printing black as a very light gray. I replaced all cartridges, removed the print head and tried to clean the contacts on the back. From advice on the HP website here, I bought a new print head. Just installed and reinstalled the fundamentally new cartridges. He gave me that a message about old print cartridges may not have enough to complete the new initialization of the print head. I just rejected because the cartridges are fundamentally new (XL version, no less).

  Now, the printer does not print anything. He's not even trying. Zineb screen shows he gets something to print, but it is just there to always say "now printing...". "without actually doing anything. There is an occasional (perhaps every 10 seconds) inside the printer, the noise that resembles something moves back, but it never attracts any document.

  As far as I know, HP has decided that without cartridges NEW NEVER OPEN, my printer is now a brick with a shiny new print head $85.

  Yes, I tried to copy with the same results.

  Help, please. I really want to spend a different $70 on new cartridges and lose the new game that is already there!

  Hi @skills4lou,

  The printhead you bought must carry a parts warranty. I'll send you a PM with some information to help. If you are unsure how to check your PMs, here is a post that can help - How to check your messages.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• Printer HP 8600 Ok, but does not print anything

  I have tried everything I can thingk of. My HP8600 (Wi FI) pro works very well, the PC says it's all Ok, no problem, but I cannot print anything (it was working perfectly a few days ago).

  It can scan from the printer to a computer predefined shared directory without any problems, but the PC does not print anything, even not the computer test page and nnthing present in the queue either.

  I ping the printer without problem!

  I have reinstlalled the pilot tiimes much, at no. avail etc...

  problem remains the same, says there is a configuration problem, I'm lost.

  In computers, it says after the installation, but the icon of the image is the kind of an empty rectangle, not the picture of the printer itself.

  Hope you can help. Maybe I'll try to destroy the driver and load it again, it's the last thing I can think.

  Hello

  Since you've already tried to uninstall - reinstall the driver of your printer, we recommend that you use Microsoft solution easy solutions. Please download the troubleshooter to solve problems with the devices and printers , and follow the steps on thislink.

  Let us know how things.

• loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  loads of YouTube but then when I click on a video it doesent play. It worked fine the other day and it does not work in the past and suddenly. Help, please!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

  I upgrades the operating system of my mac to OSX 10.9.4 and now my Dreamweaver CS5 does not work, it just that closes unexpectedly.  Help, please.

  It turns out that my video card is the cause. I removed the accidents stopped and he

• 5740: does not print anything

  Monday morning, I was able to print things very well, but when I got home from classes I wouldn't let me print anything!

  I open HP print and doctor Scan which ended, there was nothing wrong. I went to HP Support Assistant, same thing.

  I was able to print the diagnoistic from my computer but I am not able to print from Microsoft word or Google Docs.  It is not in offline mode. I have a USB key on top of the printer to the computer.

  When I try to print, it appears in its qeuce as queue and printing but my printer does not print.

  What is going on? Why it does this now? This is a new printer I've had in the month of August.

  Hello

  What is the operating system on your computer? KB3194496 10 Windows and iOS 10.12 killed a lot of printers, without mercy. I'm a victim too. I think that your machine uses Windows 10 and update automatically.

  Now, please reinstall drivers on your computer and printing software.

  Kind regards.

• DeskJet 4535: Printer scans but does not print anything

  I was able to print documents from my PC so my laptop until suddenly now I am only able to scan and print nothing.

  Here are the things I've tried:

  -all types of trobleshoots

  -tried wired (usb) as well as the installation of the network printer, but the same two result

  -hp print scan n doctor

  -removed and added printer many times

  -uninstalled and installed the drivers several times

  -installed universal hp drivers, just in case it might work

  After all the above and many wasted hours yet the problem persists

  After doing print and scan the doctor I am able to print the test page but not able to print any pdf, files etc from any device.

  After a few hours on reseach I tried printing text from Notepad and it PRINTED, but I am not able to print pdf or word files. I even got a printed pdf file Foxit software & also of IE but its does not print from adobe acrobat or word or excel.

  Help, please

  found the solution... I had to run all software as "administor run" mode and it was like... what I did is go in the example of speech software installation folder, that I went to the folder of installation of microsoft and winword.exe found a click with the right button on it and went to Compatibility tab and check the option run in administrator mode. It is printed after that.

• my new laptop does not detect the USB for installing the os

  I bought the new laptop hp 15D009TU . I want to install win7 in there. I have OS configuration is USB, but my laptop does not detect my

  USB key... Please solve this problem as soon as possible...

  Hello

  Install the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66210.exe

  Restart the laptop, then install the driver usb 3.0 below.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

  DP - K

• New HP 2132 printer does not print anything in or created by the Works word processor.

  For two weeks now, I tried to get my new HP 2132 printer to print.  I have a Windows 7 running and used a HP printer before without any problem.  I get the message that the computer and the printer are not communicating.  I tried all kinds of help and programs of difficulty but nothing works.  Does anyone have any suggestions.  Thank you.

  Hello

  Please contact Microsoft Community.

  I understand that you are facing the issue on the printer.

  I will definitely help you with this.

  Please provide the information below.

  1. What is the exact error message you are getting?

  2. don't you make changes to the pc before that?

  3. which document you want to print?

  4. have you tried any other document to print?

  5 are you facing the question on any specific document?

  I suggest you go through the below methods:

  Method 1: Try to run the printer Troubleshooter:

  1. Press WINDOWS + R.

  2. Type of Panel, and press ENTER.

  3. Click on troubleshooting.

  4. Click hardware and sound.

  5. Click printer.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Installed new toner, does not print color

  I have a Photosmart 6525 all-in-one printer and the black toner was low, so I bought new genuine HP toner - 564XL. I installed the toner and received a message on my computer thank me for the installation of an original cartridge. However, when I go to print anything, the black is not printing. The toner level shows that the black is full. Maybe I should have bought a non-genuine toner cartridge if authentic one does not!

  FYI: I received help on this problem over the phone. In case anyone else has this problem, what measures are being taken to solve the problem.

  The color cartridges are low on ink, so I had to replace both (because apparently black HP isn't really just black... it's all the colors too. Great way to make us buy more HP ink!). After installing new cartridges color, I cleaned the cartridge heads and realigned. After that, everything worked.

  Hope that helps someone.

• OfficeJet 6600: HP Officejet prints 6600 pages of test, but USB connected or wireless - does not print anything

  Hello
  For some reason any my printer has ceased to be able to print anything at all, since last night at 7-8 so far, I've been able to print perfectly well.

  It is connected wireless (and on the home network and the IP address), but whether or not it is wireless (USB) - nothing will be printed at all.

  Have tried everything imaginable... uninstalled and reinstalled all HP 3 or 4 times now, various attempted fixes via the online help, nothing works. Have unplugged router printer 30 s, unplugged 30s, you name it.

  It allows to print in-house, however, no problem. Print a test - perfectly fine page, print a network test page - perfectly well. Clear print heads... everything comes out clear.

  Spotted an error prompt "spooler subsystem app not working not"... so found this page online (https://social.technet.microsoft.com/Forums/windows/en-US/460f297a-dd66-4476-a176-542e1519ca3e/fixed... and thought it was the miracle solution - nope, still doesn't.)

  Followed the steps detailed here: http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-6600-won-t-print-wirelessly/td-p/4649292 - the link to the HP Print & Scan Dominican Republic by the way, is a dead link now... but I have tracked down the appropriate page and run the software. After following it exactly as I had to... I get this result:

  "There is a problem with your software which can not be repaired by this tool. Remove the software by clicking 'uninstall '. Reinstall the software with the product CD or by downloading the latest features full software from HP Customer Care. "- so in other words... I am told to do exactly what I've already done 3 or 4 times.

  It's driving me crazy... and do not understand why it will not print.

  I hope someone here can help... because it's completely maddening.

  Hello
  By coincidence, my grandson has me bought a new computer earlier in the month. and it arrived yesterday afternoon, a Lenovo all-in-One ThinkCentre w/Windows 7 - and after it he installed there, the printer printed fine from the computer.

  But, just in case it is needed, and because the advice was here, I thought I'd try the options.

  Unfortunately, I can't do a level 3 uninstall with the two methods provided. Method never showed a "util" folder or 'utility', both had a "utils" folder, and no method showed a record of "ccc". Also, by downloading the software, then go into the temporary folder through the search from the Start Menu, 3 sets of disc records came - and such that mentioned, none had the util/utility folder (all "utils" still had once) - and yet, none of them had a folder 'ccc '.

  My grandson theory was that something is likely messed up in the registry, and he doesn't dare touch it without knowing what it does - than a reformat or something registry editting and knowing exactly what they're doig - would be the best choice, but rather of your time and... almost useless with the new computer capable of printing. A friend IT very well educated friends, also backed up his theory...

  So, I have to wonder... don't you think it's worth, the Dungeon of combat with the old Gateway/Vista PC, or simply move to the new Lenovo/Windows 7 and cause less stress for us all? Haha!

  Thank you for trying to help but... it's too bad the computer unfortunately does not cooperate.

• Dell V305 printer does not print anything and it used to work properly. Still scans, etc., everything will not print.

  I have a printer Dell V305 that worked very well, but I'm more able to print anything from my laptop. Scanning, etc. still works but not the printing part. I have Windows 7 64 bit. He has a solid orange light on.

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Printer does not print in color after installing new ink cartridge

  I have a HP Photosmart C7280 all-in-one printer.   Windows 7 is my OS.  I have made no other changes to my computer before this problem.

  My problem:

  I installed a genuine HP brand new yellow ink cartridge in my computer because my other cartridge was empty.  After that I installed a new cartridge, my printer normally goes through an initialization process.  This time he did that.  Now when I try to print anything in color, I get a window that says "ink empty Casrtridges.   To print in color, install the following cartridges: yellow "then turns and she says in that it can only print in black."

  I did a Test print.  I ran "clean cartridges".  I did a 'print align.   All these prints in color, including the yellow.  I also did a color copy and printed the color yellow.   Ink level shows the yellow as a FULL cartridge.

  I have tried with 3 new genuine HP yellow ink cartridges and it still doesn't let me do a color print.  I have rebooted my system, unplugged the printer several times and it still will not print color.

  What else could be my problem?  What else can I try?

  Thanks for any help anyone can give me.

  Carol

  It seems that the error got stuck in the printer driver. Try to uninstall and reinstall the printer software. That should clear up the problem. I'll link the latest software and drivers below. Let me know what happens.

  Uninstalling the printer software

  Installation of the software of the printer in Windows 7 for a USB cable connection

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

  HP Photosmart full feature software and drivers

• My HP Deskjet 5440 printer does not print anything, not even a test page. Done all the diagnostic tests.

  Even I did uninstall and reinstall with the disc that came with the PC. The last clue I found was in the HP diagnostic utility that said there was a "breakdown of pen" correction which had to be fixed before printing could continue. But he had no information about the way to approach this. The "Device status" box was red checked. When I try to print anything, it seems that receives the message from the computer to the printer, but then nothing happens and I get an error message and the printer goes offline by itself. What should I try?

  Hello

  What you can check is pulling the cartridges, clean the contacts on the cartridges and the unit (without of course) and check the dates on the cartridges if there not expired. Also try printing a testpage like this: press and hold the Power button, press once on the button back and letting the two buttons.

• Why is my Dell 720 printer does not print anything? Help me please!

  OK, so I'm trying to print basically nothing of importance, but when I click on the Fax icon, it turns the paper into the printer as if it were actually print something, but I only have a blank sheet of paper. Why? I'm not this computer.

  any help would be great, thanks :)

  Why is it you are by clicking on the icon of Fax to print anything? Open a doc, then click on print.

  HTH

  > WT