My OfficeJet J4680 all-in-One is a Clipboard

Similar Questions

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I scan multiple pages to a PDF on HP Officejet J4680 all-in-one?

  I have a printer HP officejet J4680 all-in-one was given to our non-profit organization.  How can I use this to scan multiple pages to a PDF file and send it to?

  Hello

  Form of the document refer to the article on the digitization of several single-file pages.

  http://support.HP.com/us-en/document/c03476857

• OfficeJet J4680 all-in-one: J4680 does not work after installing windows 10

  I have recently installed Windows 10 on my Dell laptop.  Yesterday, I was able to print wireless at my J4680 JO.  Today, I tried to analyze, and he is identified as not online.  Can't print now.   I turned off laptop, router and printer and restarted.  I added the latest driver.  Still no luck (in print or scan - still says offline).  Help, please.

  Thank you

  Hi @mlanders55,

  Welcome to the Forums of HP Support! I see that you have problems of analysis, since the upgrade to Windows 10. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the printer software already, I'd say to start it there first. Here is the link to the latest drivers: OJ_AIO_J4600_Full_Win_WW_140_408 - 5.exe

  You can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor?

  I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

  Please let me know the result and if there is anything else I can help you. Thank you.

• OfficeJet J4680 All in One – need HP solution for scanning Center

  Hello... We justgot a new computer and already have the configuration wireless for printing.  But, I need the Center solutions on my desktop, so I can scan.  We run with Windows 7.  Please hurry, I have a business to run and something out!  Thank you

  Hello

  From the following link, you need "Full Feature software and driver" for Windows 7. Please select 32-bit 64-bit ot to download:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3692888#N203

  Kind regards.

• Re: HP Officejet J4680 All in One Printer - Windows 7 64 bit

  I changed my wireless printer.  How to scan a document using my wireless printer.  I get a screen on my printer that says no 'connected to the computer.

  Hi, you can download the drivers and the software complete features on the site, if you have not already.
  http://goo.GL/BVOOg

  1 printer in the search box
  2. choose your operating system
  3. when he asked for the download, select FULL FEATURE SOFTWARE

  If you have the HP Solution Center already installed on your computer, you should not download the drivers.
  Click SCAN SETTINGS
  Select ENABLE SCANNING

• I can't fax with my "HP OfficeJet J4680 all-in-One Printer" on Windows 8

  I got the new computer of Windows 8, before cause I had Window XP & then the Print/Fax worked well. Until I upgraded.

  Can anyone help me please with faxing with the new Windows 8!

  It works now. Thank you!

  The problem was, there were two telephone cords in my printer.

  I had to plug it into the ext slot.

• J4680 ALL IN ONE: POWER PRINT; UNABLE TO FAX OR SCAN CONNECTED WIRELESS.

  ERROR MESSAGE CONSTANTLY ERROR 358

  Hey @GS44,

  Welcome to the Forums of HP's Support.

  I understand that you encounter some issues an error message when scanning for your Officejet J4680 all-in-One printer to your computer Mac OSX 10.11. I can help you with that, but I'll need to know if you see the message on your computer or a printer. I also need to know what program you want to scan to. and if you are able to make a copy of the façade. Once I know that I will be better able to help you.

• Printers HP j4680 all-in-one: report of transmission J4680

  I have a HP j4680 all-in-one printer and am running Windows 7.  I no longer receive the audit reports of transmission when I send a fax.  I received of these reports, but for some reason any printer no longer prints this form after the fax is sent.

  Hello @Basha2,

  Welcome to the HP Forums!

  I hope you have a pleasant experience here.

  I want to help you with the confirmation report of fax on printer all-in-one HP Officejet J4680.

  I don't know why it would stop printing. Did you do any sort of reset of the printer? Or make changes to your configuration? Either way, here are the steps to make sure that it is turned on:

  1. On the Panel of your printer, tap the Setup button (it looks like a key).
  2. Press the right arrow until you see print the report to the screen. Press OK.
  3. Press the right arrow until you see Fax of Confirmation on the screen. Press OK.
  4. Press OK when you see IT, on the screen.

  I hope this helps!

  

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

  Stampante Ho Una HPofficejet 4500g510g,.

  by the prima volta ho usato stessa cartucce Originali my ricaricate...

  Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

  Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

  riceve i Comandi dal calcolatore, not li can...

  E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

  No Yes Cosa Posso fare...

  Hi @maryf78

  If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

  More details in the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  

  

• All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

  My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

  I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

  I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

  I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

  Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

  FINALLY HE GOT WORKING:

  Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

  Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

  1. If the printer software is installed, uninstall it.

  2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

  If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

  Here are some of the files and locations but check they are all listed and not missing anything.

  c:\Windows\system32\drivers\usbscan.sys

  c:\Windows\system32\hpotscl1.dll

  c:\Windows\system32\hpowiav1.dll

  3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

  c:\Windows\system32\drivers\usbscan.sys

  before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

  c:\Windows\System32\Drivers

  the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

  4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

  5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

  As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

  NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

  And thank you Gemini02 for helping me with this.

• I lost the CD start to my officejet 5510 all-in-one printer

  I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again?  Thank you for your help, Sue

  You can download the full software for printer you in the section to download the software and drivers of the Portal of support for your printer.

• HP officejet J4540 all-in - ONE: fax

  When you try to fax with my hp officejet J4540 all-in - ONE I hear the tone, the display shows fax is connected, but I get always a message "fax send failed". I ran a fax set up the test and everything passed. The question might be the telephone line in my house? Phone company put a new filter on the fax line and he sent a fax that day, but none after that. He always says "fax sending failed.

  Hello

  Please contact us. I understand that you are unable to send faxes from your printer.

  You can follow the steps mentioned in the document.

  http://h20565.www2.HP.com/hpsc/doc/public/display?calledBy=Search_Result&docid=emr_na-c01670414&docLocale=en_US

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.* *.