My passport S/Nwx61acop3826 device

Similar Questions

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• BlackBerry not available passport for this device

  Hello

  When I 10 Viber or Amazon's Kindle in the world of BB I see the message "Not available for this device" and I can't download them. As far as I know, these applications must run on the Passport. Then why I see this message?

  Thank you
  Peter

  You won't get those BBWorld.  You can not even them to the Amazon store.  You must install the snap on your device.  It only takes a moment to do, and then you will have access to all the applications you want from the Google game store.

  http://supportforums.BlackBerry.com/T5/downloaded-applications-for/you-upgraded-to-OS-10-2-1-and-Wan...

• BlackBerry App no Lords of midnight Passport

  I experienced just buy the game The Lords of Midnight on BB world to discover that the game does not work on passports.  Contacted the developer who confirmed that the game was not formatted for the device. It would be nice for the exception to be mentioned in the store.

  Hi @ivan29200

  We have removed the Passport as a device supported.

  If you have not already, I would recommend asking a refund > BlackBerry World Support, 'Reimbursement Support'

  Thank you for reaching out to this topic!

• Game blackBerry google Passport Services does not work

  I am very disappointed after knowing that there is a lot of useful apps that are not available in Blackberry World. Then I downloaded google game store by entering my blackberry passport with identifier google. But even applications downloaded on google play store asked me to download google game service to make all the applications work correctly. Then I downloaded google game services from crackberry.com, but unfortunately I got the same message everytime I run the android app in my passport that "your device isn't google games services. Contact the manufacturer. "

  What will be the likely solution?

  There is no service to game google on BB10

  There is a hack, but not all google programs work on a square screen

• BlackBerry software No. Deviced are associated with your blackberry ID

  Hi, I just saw this again in news, so im looking forward to search for this think (mixture of Blackberry) this one I've been waiting years finally out and I've already downloaded it today, but I have a problem here when I try to connect with my blackberry ID say " No. Deviced that are associated with your BlackBerry ID .

  (think to another how to insert image here, when I tried to insert image it is chance to choose the computer or on the web)

  Hello

  Based on what you have presented here, I can only assume that you are not eligible for the mixture. Mixture is currently only available to users who have the passport or 9983 device and running BBOS 10.3 or higher. Your profile here says "torch 9810", which does not meet this criterion.

  Good luck!

• Unable to connect WD My Passport to Windows 8 Tablet

  I've seen a number of messages on the same issue, but using the proposed solutions does not help.

  I have a WD My Passport (1 to) that I have connected to my very old desktop PC running Windows XP.  I backed up a DVD to watch on my Tablet (ASUS Vivo tab running Windows 8).  When I connect the WD My Passport to the Tablet, the light starts to blink and automatically download the WD Store application.  However, when I open the app, it says no device of funded by WD is connected.  The WD My Passport shows under devices, but not on the classic desktop when I try and view the devices - only my C drive and my SD card connected.

  I tried running the two Hardware Troubleshooter (no solution) and cannot see the device when you use either disk management, so can not give her a letter.

  In addition, it seems that I have the updated driver.

  The device connects perfectly to my desktop PC, so I don't see why it will not connect to my tablet.

  Any help is highly appreciated!

  James

  Hi Tony,.

  As the question arises again, you can see these articles of WD and also contact WD.

  http://wdc.custhelp.com/app/answers/detail/A_ID/1708/related/1/session/L2F2LzEvdGltZS8xMzcyOTk4NzM5L3NpZC9EVlJsZHF1bA%3D%3D

  http://support.wdc.com/product/download.asp?Level1=2&lang=en

  Contact support WD here: http://support.wdc.com/contact/index.asp?wdc_lang=en

  Thank you.

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• OS 10.3 / WebView: no interaction with the Google Maps Javascript API

  Hello

  Google Maps Javascript API no longer works correctly using the Web on OS 10.3.  On all the operating system previous releases everything worked perfectly fine in WebView but on OS 10.3 even if the plan (or view, or anything else provided by Google APIs) is displayed correctly, there is no interaction whatsoever with it - no response to taps, none is panoramic, no zoom, etc.

  I don't speak of the 10.3.0.698 Simulator - I do not have access to the true OS 10.3 device.

  Even simple examples of Google Maps doesn't work, try for example:

  import bb.cascades 1.2
  
  Page {
      Container {
          preferredHeight: 720
          preferredWidth: 720
          WebView {
              preferredHeight: 720
              preferredWidth: 720
  
  url: "https://google-developers.appspot.com/maps/documentation/javascript/examples/full/marker-simple"
          }
      }
  }
  

  The map appears, but there is absolutely no interaction with it - just a STATIC content.  On OS 10.2.xxxx, it works perfectly fine...

  P.S. If you open the same example URL directly in the web browser on OS 10.3 everything works well - responds to taps, she can be zoomed, panned, etc..    So, it's apparently a problem with user agent (which is probably the same web browser both webview).  Change the user agent in WebView to e.g. Z10 user agent doesn't help, either.

  Can anyone help?

  Your sample application does not seem to suffer the original bug, I thought. That bug could cause a WebView with no ancestor ScrollView would get too small window Visual and tactile input would be anchored to the Visual display window very small. If you want to learn more on this topic, see a tale of two windows - part for the discussion of Visual and updated display on the page. Perhaps your sample application it is OK because it specifies a preferredHeight for Web display, which can affect the used Visual display window.

  To be more precise, on a real device of passport BlackBerry running OS versions 10.3.0.1052 and 10.3.0.1154, the sample you provided responds perfectly to press ENTER.

  However, on the Simulator on OS 10.3.0.698, I can confirm input touchscreen does not work. Therefore a separate bug, which seems to be specific to the Simulator.

  I think you can be assured that end users will still be able to use your app (s) on a real passport of BlackBerry device, but it is unfortunate that it does not work on the Simulator.

• Defective unit. Miniport (Network Monitor) Wan #2 (Code 31)

  Defective unit. Miniport (Network Monitor) Wan #2 (Code 31) win 8, S855D from Toshiba. Failed to uninstall the device or load drivers.

  No errors on the first instance of Miniport Wan (Network Monitor)
  Problem started after 1 t Western Digital drive backup (passport). I scraped the WD Installer and restored to pre install passport.
  Miniport (Network Monitor) Wan #2 disappeared, no device in Device Manager.
  Win 8 update showed 5 important files identified by download. Installed files, (passport No.) original device error is back.
  Tried to "Regedit", access denied with admin log in. Error has nothing to do with a network card, despite its location in the Device Manager. Everything works, I want to just #2 GONE! Answers to similar questions have not given favourable results, so I digress and must request a similar, yet pending issue. Any help is appreciated.
  After several years of gene, this solves the problem for me:

  http://support.Microsoft.com/kb/2871372

  Even had an explanation :D

• Mass storage device USB WD Passport 070 has

  I recently bought a WD Passport 070 (1 to) a USB mass storage device... I went through all the appropriate channels to get it recognized on my windows vista computer, and all said that it works well. (I did the whole Device Manager/uninstall everything and then analyzed for new and checked and then in disk management and said it's very good)  My problem is... Where/how you get?  in fact it open and start to transfer things to my portable hard drive?  Thanks for your time

  You have not said if the drive is formatted.

  Hard drives, which are main storage on your computer, need to be formatted before using them. Formatting a disk means configuring the disk with a file system so that Windows can store information on the disk. Already the format of hard disks in new computers running Windows. If you buy an additional hard drive to increase the storage of your computer, you may need to format.

  Formatting disks and drives
  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  I hope I could help

• Files could not be copied into a WD My Passport External Drive because of an error 0x8007045D i/o device

  I tried to copy files from my hard drive into an external Western Digital My Passport drive. But, as I was watching the progress of the copy of the files, I noticed that only four files have been copied to the external. A large majority of the files could not be saved due to an error 0x8007045D i/o device. I noticed it's the same error I get when I shut down my computer (in this case it is said error of breakpoint or something). Drag / drop files did not work. Still later, my USB key no longer works.  I tried to check my hard disk for errors, but my camera came out clear.

  I use Windows 7 Professional 32 - bit, E5800 Pentium Dual Core and an Asus motherboard.

  How can I get rid of this error because I need to transfer my files specifically in the external hard drive?

  Help, please. I'm not very tech savvy so simple instructions the better.

  Hi @roryheadmav!

  You can try the basic steps in such cases troubleshooting - first try to connect the hard drive to an another USB port of the computer and if possible with another USB cable.

  I hope that you will be able to transfer all the data you have, but in case it does not work, you can also boot into safe mode and try to copy the same and see if you can successfully complete the copy error-free operation. You can follow this article that describes how to enter Safe Mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope this helps and let me know how it went.

• The default Passport blackBerry device password

  Hello. I just got a new passport. When I was upgrading my phone, the NEW PHONE first, I still got part of device password. However, he already had the password when I tried to put a. I searched the internet for more than an hour, but it was not a valid response to it. So, assuming I "forgot" the password, I wiped the phone. When I turned on again and went to the device password, I still had a password EVEN AFTER I WIPE THE PHONE. How can I reset my password? Is this my problem device? How can I solve this? I even can't save it because I do not know my password, I've ever put forward. Please answer as soon as possible. Thank you.

  Sorry all. I figured out. Thank you.

• Passport for blackBerry not appearing calendar appointments is not on the device Passport

  I have a passport BB device connected to Exchange online using ActiveSync. Prompt appointment is accepted by the user on the device and appear in the calendar in OWA.

  However, not all appointments appear in the calendar on the passport of BB calendar.

  Appointments may not appear in the calendar, but if a reminder is set for the appointment that will open and inform the user and a search in the calendar then concludes the appointment, it appears not only in the timing of devices.

  I went through the decision-making process in charge with the team exchange who have suggested that it is a question of device online.

  Y at - it of you experiencing this problem? Can anyone suggest a way to solve this?

  Thank you

  Just to update this question, we have applied the Blackberry of KB33828 solution to see if this solves the problem. It has been applied for several weeks now and no user complained of the lack of schedules or appointments.

• Passport for blackBerry "political COMPUTER requires device password to have the value" since I added a school e-mail account

  I added a school e-mail account to my passport, which reqirered the phone to be password protected. I hate to enter a password every time I do on my phone. I deleted the e-mail account of the phone in the hope to do away with the login password, but it did not work. The phone does not allow me to disable the device password and wrote "political COMPUTER requires device to put password" below the option to turn on/off the device password. Any help or a way around it would be greatly appreciated.

  Very well. Good luck.