My predictive text stops working randomly
Turns off my predictive text on my iPhone 6 s. The software is updated with IOS 9.3.1 but never two or three weeks, sometimes sooner, the predictive text stops working. It will turn off, it just pull up in messages so I have to go into settings and turn it off then turn it back on. This has happened for several months. I thought that the last software update would fix it, but no dice. I do not understand what is the cause for this and am unsure of this diagnosis I can do. Best Band-Aid, I thought was turning works once again, but it's getting old and frustrating. Any help would be great!
If the PT line collapses - place the tip of the thumb on the line and slide gently up - this will re enable it
It can happen accidentally
Tags: iPhone
Similar Questions
-
Keyboard touch U430 stops working randomly in Windows 10
Since I've upgraded to Windows 10, keyboard stops working randomly in different programs. For example, it might stop working in Firefox, but at the same time it would work very well in Chrome and Notepad. Or it stops working in Chrome, but works very well to edge and Firefox. Most of the time, closing and opening the progrm do nothing, only a reboot solves the problem for a while. I should also mention that, while the keyboard stops working in this particular program, the program itself is not frozen and it works fine if I use the touchpad.
Not sure if MS or Lenovo is to blame, but Lenovo should look into it.
Found the culprit. 16.0.0.614 Kaspersky virtual keyboard. For the disabled that and no more problems.
-
My function paste decides to stop working randomly. What could be the problem and how could solve this problem?
A repair from the Vista DVD installation. Don't forget to have a backup/restore point just in case.
http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
-
Outputs analog BNC-2120 to stop working randomly
I have a BNC-2120 Module. I have the analog outputs implemented with an Assist DAQ. I'm running a square wave, or triangle wave at a very slow pace (.35 Hertz). I'm tracking signals with a waveform graph just before going to the modules DAQ help. The system works well anywhere from a few minutes to 25 minutes. The results seem to just stop working, but I still see the signal on the graphic display of waveform. I think that the BNC-2120 module has some questions. Someone had a problem where the output just stop working? I look in my program of VI?
Hi gwing,.
There could be a few possibilities that could go wrong. Could you upload your code? DAQ hardware do you use with the BNC-2120?
Best regards
Jonathan
-
Taskbar and Windows Explorer stop working randomly in Windows Vista
original title: windows ExplorerWell where I start, I haven't had any other problems with windows vista, I have this running on my laptop, so sick of my task bar crashing whenever I get Windows explore has stopped working does anyone know why this happening coz it's so frustrating thanks Helen x
Hello
Use the start-up in minimal mode and other methods in this troubleshooting to see if you can determine
the cause of the problem.-----------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Sound stops working randomly in Windows 8
I have the HP Envy X 2 using Windows 8 and every day I use the laptop to watch things or just listen to the music, the noise will stop working at some point. I have try the resolution of problems and no problem finding. I unplug the keypad where it is a connection issue. None of this works. The only way to solve the problem is to restart. Sometimes, it doesn't work the first time and I have to restart a second time. It's getting really frustrating now and I don't know if that's a problem with my laptop and I'll have to send again or if it's a matter of Windows 8.
I'm grateful for any helpThank youHi Jennifer,.
-Have you tried to reinstall the Audio drivers to check if it works? If this isn't the case, I suggest you to install the latest drivers and check.
Visit the HP website and download the Audio drivers based on your model number of the laptop.
Once you have downloaded and saved to the desktop drivers, follow these steps.
1. press the button on Windows and the X button, then select Device Manager.
2. Browse sound, video and game controllers.
3. right click on the Audio driver and click on uninstall.
4. you will be asked to completely remove audio drivers. Press OK and continue.
5 restart the computer, and then install audio drivers that you downloaded from the HP website.
Hope that reinstalling the driver may resolve this problem. If you have any questions, please let us know.
-
Network layer stops working randomly
Hi all
We have a very strange problem since upgrade to a fromESXi of Fujitsu ground RX300 S5 Server (48 GB of RAM) 5.1 to 6.0.
Almost every morning from 7 to 20:00 the network layer of the machine stops working. That is the whole network of physics
Server is off, no link with possible virtual machine either.
Restarting the console network does not help, but I guess that the virtual machine is always high and online since the clanking of the virtual machine
the hypervisor console works.
Newspapers are not very complete, we are now trying to find out what exactly causes the network layer to stop working.
There is another ESXi Server works perfectly (so far) with 6.0 in our network, material is mostly the same, running the
same network switch.
Here, someone has an idea what might in fact cause this behavior?
So I put the new NETWORK card in the machine on Friday, we'll see what happens.
/ e: Okay, it's now a week since the latest incident and the installation of a new network card. With all caution I'll declare this as resolved, the new map seems to work.
-
audiodg.exe stops working randomly
Hi all.
Audiodg.exe process system hangs at random. There is not much more I can tell you why it happens, but I have had experience for at least 9 months.
It is extremely annoying as a producer of sound to interrupt my work several times a day, or my game at home, or just chilling (very short) time watching a movie, just for a normal behavior of the restore process.
My solution:
Whenever I have an abnormality on the process (audiodg.exe ends, or uses maximum CPU - core of 1-100%), all I have to do is:
(a) kill the process manually (Manager - performance - Task resource monitor), if it is still ongoing.
(b) stop all programs that reproduce music (such as Teamspeak, Media Player, games...)All solutions? I feel compelled to move to Mac or Unix, all the software I work with now for at least a little of compatibility with one of the other OS' are.
Generally, problems with audiodg.exe are caused by defective audio drivers. Have you tried to update those?
-
Charger stopped working randomly
Hello
I used my charger this morning and everything was fine, I went to plug my phone tonight and nothing has changed, it will not work! What can I do - annoyed as I rely on my phone a lot.
Have you tried a different USB power adapter and different lightning cable?
-
It's a belkin router and belkin wireless card. It was working fine one night and the next day he does not see the router. I have reset the router and the wireless card. Reset the computer and cell phone, but still no access. The lights are on the wireless card and I got no error messages.
original title: laptop does not see my network router.Hello
· Who is the service pack installed on the computer?
You can try the steps he listed in the links: how to fix wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702
Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows
You can also run the troubleshooter by downloading the file from the link: focused on troubleshooting Microsoft Windows XP with wireless networks in small businesses or individuals: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=35c7e5ad-59e7-477b-9d27-6a7030e67002&displaylang=en
-
Internet Explorer stops working randomly on Windows Vista
original title: internet explore on vistadosent Internet Explorer seem to recognize when im online and told me im not stuck? or when work doesn't work alltogether usually when im in the middle of something
Hello
Here is some useful information if all goes well for you
try to read the information contained in this microsoft link troubleshooting internet explore
There is also a ' fix-it ' it all a lot of methods to follow
You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
http://support.Microsoft.com/kb/956196
There is an automatic "Fix - It" at the top of the link I gave you
-
My computer stopped working randomly and now I'm trying to fix it myself
Best Buy said they think it is a virus. My computer is supposed to be having a software failure, but I don't know if that's really the problem. How can I tell if the problem is hardware or software? my computer respond for example when I push the power on it lights up and when I hit eject the disc tray fate etc. Dell said they can fix and give me a guarantee for an arm and a leg... but I'm not ready to cut my body parts to appease Michael Dell. (im not happy right now)
How can I know for sure what is happening? I'm currently reinstalling windows to see if this changes the problem... it will work?
Thank you people. -.
BR
Best Buy said they think it is a virus. My computer is supposed to be having a software failure, but I don't know if that's really the problem. How can I tell if the problem is hardware or software? my computer respond for example when I push the power on it lights up and when I hit eject the disc tray fate etc. Dell said they can fix and give me a guarantee for an arm and a leg... but I'm not ready to cut my body parts to appease Michael Dell. (im not happy right now)
How can I know for sure what is happening? I'm currently reinstalling windows to see if this changes the problem... it will work?
Thank you people. -.
BR
you reinstall windows, which should solve software problems as the hard drive is wiped clean during the resettlement process
If you continue to have problems after relocation, run the dell diagnostics by pressing F12 at startup
Read about it
http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm
Walter, the time zone traveller
-
Type text stopped working: only get a horizontal line
In Photoshop elements 13, the text now does not produce a horizontal line. What should I do?
Confirm that the color of the type is not the same as its background
-
Adobe Elements 9 first stopped working randomly, please!
Just recently, when I try to open my first Adobe Elements 9 and an error message keeps popping up that says "we have detected an incompatible driver display, please update.» HD 4400 3.0.0 - Build 10.18.10.3977 graphics card. "I went and updated the driver, but whenever I try to open the first pop-up continues to appear and when the Prime Minister opens the video tracks on my calendar does not display on the back screen of game then it makes editing impossible.
I had this same first Adobe Elements 9 from 2011 and had no problems until about a few days ago.
jfrazee216
First Elements 9
Windows 8 (assumed 64bits)
Remember to work from the 9.0.1 update
Adobe Premiere Elements: For Windows: Premiere Elements 9.0.1 update
Have you yet to delete the BadDrivers.txt file?
To do this...
Local disk C
Program data
Adobe
First Elements
9.0
and in the 9.0 folder, is the BadDrivers.txt file that you delete. It is essential that you have Folder Options Show hidden files, folders and disks active so that you can see the full quoted path.
We will follow to your results.
RTA
-
Hi Im doing a head of mast youtube banner with several video players. the problem I have is that on certain periods to stop buttons on the right side and sometimes also those on the left, I don't know which can create.
This is the code that I use with the video and the buttons. And here is the swf file, then you can try to see the error http://alejuu.com/demo/vice/banner/YT_Masthead_970x250_parent.swf
import flash.events.MouseEvent;
import com.google.ads.studio.events.StudioEvent;
Stop();
Security.allowDomain ("www.youtube.com");
var videoPlayer:Object;
var loader: Loader = new Loader();
loader.contentLoaderInfo.addEventListener (Event.INIT, onLoaderInit);
loader.load (new URLRequest ("http://www.youtube.com/apiplayer?version=3"));
function onLoaderInit(event:Event):void {}
addChild (loader);
loader.content.addEventListener ("onReady", onPlayerReady);
}
function onPlayerReady(event:Event):void {}
trace ("Ready");
videoPlayer = loader.content;
videoPlayer.setSize (230, 172); PUT THE DIMENSIONS OF YOUR VIDEO IN THIS LINE
videoPlayer.loadVideoByUrl ("http://www.youtube.com/v/Eo9V0FrKGu8", 0 "); PUT the URL of YOUR VIDEO IN THIS LINE
videoPlayer.x = stage.stageWidth/2.0 - videoPlayer.width/2.0;
videoPlayer.y = stage.stageHeight/1.60 - videoPlayer.height/1.60;
}
function playRockabilly(event:MouseEvent)
{
gotoAndStop (3);
}
rockabilly.buttonMode = true;
rockabilly.useHandCursor = true;
rockabilly.addEventListener (MouseEvent.MOUSE_OVER, playRockabilly);
function playBiker(event:MouseEvent)
{
gotoAndStop (4);
}
biker.buttonMode = true;
biker.useHandCursor = true;
biker.addEventListener (MouseEvent.MOUSE_OVER, playBiker);
function playHiphop(event:MouseEvent)
{
gotoAndStop (5);
}
hiphop.buttonMode = true;
hiphop.useHandCursor = true;
hiphop.addEventListener (MouseEvent.MOUSE_OVER, playHiphop);
function playCholo(event:MouseEvent)
{
gotoAndStop (6);
}
cholo.buttonMode = true;
cholo.useHandCursor = true;
cholo.addEventListener (MouseEvent.MOUSE_OVER, playCholo);
function playSurf(event:MouseEvent)
{
gotoAndStop (7);
}
surf.buttonMode = true;
surf.useHandCursor = true;
surf.addEventListener (MouseEvent.MOUSE_OVER, playSurf);
function playRock(event:MouseEvent)
{
gotoAndStop (8);
}
rock.buttonMode = true;
rock.useHandCursor = true;
rock.addEventListener (MouseEvent.MOUSE_OVER, playRock);
function playOtaku(event:MouseEvent)
{
gotoAndStop (9);
}
otaku.buttonMode = true;
otaku.useHandCursor = true;
otaku.addEventListener (MouseEvent.MOUSE_OVER, playOtaku);
function playSkate(event:MouseEvent)
{
gotoAndStop (10);
}
skate.buttonMode = true;
skate.useHandCursor = true;
skate.addEventListener (MouseEvent.MOUSE_OVER, playSkate);
function playHinrgy(event:MouseEvent)
{
gotoAndStop (11);
}
hinrgy.buttonMode = true;
hinrgy.useHandCursor = true;
hinrgy.addEventListener (MouseEvent.MOUSE_OVER, playHinrgy);
you have so many errors object null it's hard to believe that you could publish this swf without seeing errors. There are dozens of functions with the null object errors.
Maybe you are looking for
-
Hello When I get Whats app with pictures and videos and I try to open them... I get following message / warning - download failed: Null Pointer Exception: Java.lang.NullPointerException. Kindly help me. Thank you... Rishi
-
Windows Media Player (Windows 7) DVD playback problems
In the last two days Media Player has stopped playing DVDs. It did not come with error messages and there is no available updates. If I restart my computer then it will play the disc, but often will not play another disc if I try to play it after. So
-
Unable to view photos on CD - error code 0 x 80010108
original title: received OX80010108 error code when you try to play a cd with pictures on it that I just burn. I am running windows 7 home Premium I just burn my holiday pictures to a cd, and now I can not play on my computer. I get the OX80010108 er
-
History file, Move File dialog box
I backed up my pc to the network attached storage (NAS) previously using the file history. Now I am trying to save the 2nd target – an external hard drive double protection. I clicked on "Select Drive" and selected the external drive. Windows then pr
-
File recorded incorrectly and parts of the image are missing
I was working in Photoshop CC and saved that I made changes. I have added teeth, skull, the eyes and recorded. No problems. I added the background and not registered, no problem. I added the flame and saved... photo is destroyed. When I clicked