My printer is on the list to be able to print apps but when I try to do it says it can't

Similar Questions

• Since the installation of El Capitan, I can't connect to shared on the network computers. I can see them, but when I try to connect it says connection failed. I can connect directly in Parallels using a shortcut.

  I can't connect to shared network computers. Not a problem already before the update to OS X El Capitan. The computers appear in the Finder under heading Shared, but when I try to connect it says connection failed. However, under Parallels Windows 7 I can properly connect via the shortcut or mapped drive. Any suggestions?

  El Capitan is a bit fussy about safety. Try

  Finder > go > connect to server...

  and enter the address of the server explicitly in the dialog box that appears.

  C.

• The PC shows it belongs to a homegroup, but when I try and join the laptop to the Homegroup PC, following the instructions, including the seizure of the password, it fails.

  I have two computers in a small home network, both running Windows 7. A laptop and the other a PC. The two appear in the network on each computer. The PC shows it belongs to a homegroup, but when I try and join the laptop to the Homegroup PC, following the instructions, including the seizure of the password, it fails. I want to share photos, files and documents, etc.

  Any ideas.

  Original title: homegroups

  Read this discussion and see if it helps you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/HomeGroup-cannot-figure-out-how-to-share-files/f2ee4a6b-1540-4894-8a80-15168e55fc83>

  Here is another method that doesn't use homegroup. I've used this between two machines of Win7 and between Win7 and Win8 machine, as well as the topic Win7 and WinXP. I am frustrated with Group residential everything and currently have disabled entirely.
  http://www.howtogeek.com/HOWTO/Windows-7/share-files-and-printers-between-Windows-7-and-XP/>

  SC Tom

• I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

  I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

  Widget Browser is long gone.  Adobe stopped quite earlier.  The widgets were outdated and 3rd developer were not very keen on keeping them.

  Use the Adobe Exchange panels.

  Or look at jQuery Plugins.

• my computer says printer ready, but when I try to print it does not say connectedit is a HP 3000 3 month old.

  I have a wireless printer. On the computer it says ready, but when I try to print it says not connected. Help

  Print a Network Setup page using the controls on the front panel of the printer.  See your manual for details.  Some newer HP printers have very summary User Guides (if you have the Deskjet 3000 J310, this means you) and it is difficult to see how - or if - you can print a Network Setup page.

  What you want to do is (a) determine the IP address that is currently configured in the printer and potentially re - configure an IP address of your choice.  You may need to search in the help for the printer on your computer system.  You may be able to access the printer setup utility using your Internet browser or you need maybe connect you the printer to the computer via USB and use the printer installation CD.

  Once you know what the IP address of the printer (and, preferably, how to change), then...

  On your computer.

  • Click Start > printers and faxes
  • Right click on your printer icon, and then select Properties
  • Click on the Ports tab
  • Taking care NOT to click in the list of ports (where you might accidentally change something), click Configure Port
  • Compare the IP address in the box "printer name or IP address.
  • If the IP in the box is not the same as the one you have determined for the printer, make sure.
  • OK your way out and you should be able to print.

  Now... If the above has solved your problem, you might want to know why and probably would like to know how to prevent it from happening again.  Him 'why' is normally your wireless router automatically sets the IP address of the printer.  If you turn the printer off, there is no guarantee that the router will assign the same IP address when you turn back on it, especially if the other devices were connected to your router in the meantime.  There are two methods to deal with this.

  One, you can check the checkbox in the tab "Configure Ports" which always says 'print to this device, even if its IP address changes.'  This is a feature that the HP printer drivers have, but in my experience, it is not reliable.  It works probably better if you change the contents of the box of the IP address of the printer "hostname."  This is something that you should be able to find in the printer setup utility accessed through your web browser.  It is NOT the name of 'Port' that appears on the "Port Configuration" tab in the area above the IP address.

  Two, you can change the way that the printer receives his usual default IP (automatic) address manual, otherwise known as a static IP address.  If you do this, you will need to choose an IP address that is in the same subnet as your router (this means that the first 3 of the 4 series of numbers of the IP address must be the same).  For example, if the IP address assigned to your printer is 192.168.1.105, then any IP address that you select for use as a static IP address for this printer must begin with 192.168.1.  The last part may be any number of through254 2, EXCEPT that it may not be a number this router can assign to something else.  You will find this bit of your router configuration utility.  Or, if your printer was awarded automatically an address with the last part as 100, 101, 102, 103, etc, you'll be pretty reliable if you choose a number far away, but still within the range (for example, 25, 50, 200).

• I can install a shortcut to a Web site on my desktop, but when I try to call, it says path or the file is not found

  I tried to install a shortcut to a Web site on my desktop, but when I try to use it, the popup says "application not found". How to solve this?

  Have you already installed and unisntalled another browser?
  When you install another browser and choose the default installation option, the program asserts itself as the default program.

  In Internet Explorer, check the menu Tools > Internet Options on the tab programs that the default web browser is set to Internet Explorer.

  Go to control panel > programs > default programs and select "associate a file type or Protocol with a program. Scroll to the file under 'Name'.url extension and make sure that the default current is "Internet browser". Otherwise use the ' Change program... "button. »

• in lightroom 5, I was importing images via a card reader. Now you can see the images on the computer but when I try to import it says that it cannot read the card of ideas how to fix?

  I was importing images via reader of card without problems. Now, all of a sudden, I can see the images on the screen, but when I try to import the computer says it cannot read and quote the numbers of images. No idea how to fix?

  Please give us the exact error message.

  Please indicate your operating system.

  Please indicate the exact version of Lightroom you use.

  Please give us any other relevant details.

  -What this means: "now, all of a sudden, I can see the images on the screen? You are looking in Lightroom or your operating system or the screen of the device? Where?

• I got a serial number, but when I try to license it says that the number is not valid

  now what should I do?

  Hello

  Please see: -.

  Error "serial number is not valid for this product". Creative Suite
  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

  Error failed to validate the serial number | CS6
  http://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

  Hope this helps!

• Windows Media-Play list. When I try and play it says that it cannot find the usage rights

  I recently had my computer repair, my music files are still on the computer but when I try and play it says that it can't find usage rights. How can I find these and restore them.

  original title: list of Media-Play of Windows.

  Hello

  Method 01:

  I suggest you follow the link and check.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2:

  Try the remedy proposed below and let us know if it works for you.

  (a) click on the Start menu, choose all programs, then Accessories, and then right-click on the element of the command prompt and select run as administrator

  (b) click on continue to allow it to open a prompt with administrator privileges

  (c) run this command at the cmd prompt: sfc/scannow

  (d) the cmd prompt should list text stating "start system analysis. This process will take time. »

  (e) wait for the scan to complete (this may take several minutes, so be patient).  This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions

  (f) when the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct

  (g) if any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct errors

  (h) after the correction of the errors that are found, try to use Windows Vista Media Player again.

  I suggest you to follow the links and check out them.

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  The Player Windows Media DRM: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-DRM-frequently-asked-questions

• 500 PSC GETS STUCK ON WARMING UP WHEN I TRY TO COPY ME SAYS THAT THE SCANNER DOES NOT

  My HP 500 CPS still print fine but when I try to scan something it fails. I turn on my computer and printer off a few times and it will scan. I thought it was a driver issue first of all them perhaps the cable. It has been getting worse and now it copies. I disconnect from the computer and try to copy it gets stuck on the warm up and then gives me the same error SCANNER FAILURE TURN OFF THEN ON. The light is on and it loads paper acts as a heat sensor is bad. I have a good rear electronic on the ground. Maybe someone could point me in the right direction. I really like this old printer and I am ready to spend time fixing it.

  Thank you

  Want to thank those who took the time to read my problem. I FIXED IT. On a forum someone talked about the problem of warming up and I realized that the only thing that needs time to prepare would be the light of the scanner. I disassembled the scanner Assembly cleaned the mirrors and that fixed it! Has been and still is a good SPC. In order to reduce the cost, I filled my cartridges.

  I gave myself another problem. I uninstalled the drivers several times trying to solve the problem of the printer. Now I have additional drivers in device for printers 1284,4 Add-in Manager. No matter what I do XP reinstalls them. A few years I had back get a program installed at HP to clean the registry file so that I could do a clean install of my HP PSC 500 windows drivers. Now I can't find it. guess I didn't save TI - DAM! Been looking on the web site of HP have yet found. - PROGRAMME of INSTALLATION of ANY BODY GOT A LINK FOR HP.

  THANKS AGAIN

  Steven Ruther

  PS; They have me as a student. I have 60 years and owned by a company of software from 1980 to 2000.

• I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

  I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 4500 Wireless - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can not get the printer to answer (Dell P703w) printer is turned on, is recognized by the computer as the default printer, but when I try to print a page - nothing happens

  Printer is turned on, is recognized by the computer as the default printer, but when I try to print a page, I get nothing. Have you tried "Troubleshooting" and it says I have 3 items in the quieh that prevent printing?

  Hi, Mike,.

  A moderator has moved this thread to the hardware and drivers Forum.  Note the drop-down menus by clicking on the links below.  Thank you.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware

  Save the documents you want to print

  Open the Printers folder

  Right-click on the printer icon and select open

  Click file > cancel all Documents

  Close the print queue

  Start > type services.msc

  Scroll down to print spooler

  Click with the right button on spooler and select stop

  Wait for Windows to stop the Service

  Close Services window

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the IEEE... compatible printer

  Right-click on the driver and select uninstall

  Click on the + sign next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the printer driver and select uninstall

  Close the Device Manager

  Computer reboot and Windows will reload the drivers

  Back to Services.msc

  Right-click on print spooler and select start

  Wait for Windows to start the Service

  Services nearby

  Try printing again

  Go to the manufacturer's website and search for driver updates

• I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it.

  I am trying to install a printer wifi (Kodak ESP 7250) and they are both connected to the same wifi but when I try to add the printer, my PC can't find it. I made sure they are both connected to my home network and when I go to control panel / printer and try to add a network printer / wireless. He won't find it. Any ideas?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression.

  * Original title: printer print only symbols

  Hello world

  When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression. If my old document is damaged to corrupt so how do I fix it

  Old documents are probably corrupt. Check out these links:

  How to troubleshoot print failures in Word: https://support.microsoft.com/en-us/kb/826845

  How to troubleshoot printing problems in Word: https://support.microsoft.com/en-us/kb/826862

  Troubleshooting damaged in Word documents: https://support.microsoft.com/en-us/kb/918429

  And this announcement in Office/Word groups is a better idea. This may very well be a FAQ here.

• Printer Offline Message When you try to print the Office Word doc

  Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

  Hi Robin,

  Are you facing this printer offline error when you try to print from Microsoft Word?

  Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

  I suggest you try the steps from the following link and see if that helps.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

  I hope this helps. Let us know if you have other problems with Windows in the future.