my printer wll not print

Similar Questions

• WndOws 10 on Stream 7 5709 wll not install

  Although many people on this site of the Community said that they were able to load Win 10, feel for the mistake that wll Win 10 statng load not because I am usng an OS compressed.  Any help would be wonderful - thank you for your time!

  To clarify this more, the error "Windows can not be installed because this PC uses a compressed operating system." was apparently introduced with the latest Windows build 10 9926 released 23 January 2015.  It was possible to do an upgrade of a Windows system with Windows 8.1 WIMBoot previous 10 relies, I have made a on the Stream 7 last month.

  I expect that there will be a fix for the build 9926 or at least a fix for the final version of Windows 10 to allow the upgrade in place since a large number of customers with WIMBoot probably want to update without wipe their hard drives.

• Computer wll not power up, the normal mode or safe mode

  During the turn it on I and a message that one of the drives should be checked for consistency.  It does not matter if I try to check the ordered such disc or ignore control my computer going o a black screen.  When I try to start in safe mode, it goes to the black screen even.

  Boot your system using a system repair disc.  Who can provide opportunities to repair windows 7.  You should have this record.  If you do not, find another computer to work Windows 7 with the same number of bits (32/64) as yours.  You will need a blank CD.  Start, all programs, Maintenance.  Make sure that your system starts on this disc.

  If this isn't the case, most likely your hard drive has failed.  Leading to the replacement and a full installation of Windows 7.

• CP 4 synthesis speech wll not install or work

  Greetings:
  I decided to do a trial of Captivate 4 and build a demo to display the Manager to convince him to buy it for me.
  
  Unfortunately, the speech does NOT install when I followed the links and the direcitons, I get a message that there no voices and download. I did it four times now.
  
  I saw a post here saying "go to the folder where it is installed and click the EXEs.." this folder is which? I don't see an obvious match.
  
  If I can't get the text to speech to work, my manager will never jump for the bucks. Thanks, QuizQueen
  

  Hi all

  I just uploaded a Captivate movie that I hope will help people get installed TTS voices.

  Click here to watch the movie

  See you soon... Rick

• BlackBerry Smartphone camera wll not start

  When I try to run the camera on this phone an error message apperas - camera cannot open. Close other applications and try again. I think that neither know what other programs are still open.

  have you tried pulling the battery and then try it immediately after?

• printing images

  I have a HP photosmart printer. When I try to print from my pictures using Photo Printing Wizard he wll not get out of the photo tray out paper tray... I was told that there is some think change in photo brought back Assistant to print using my HP. Anyone know?

  I'm guessing you want to print on paper 4 x 6?

  I have no experience with your printer model, but it may be useful
  try to open the printer preferences and place your default paper
  size 4 x 6.

  Good luck...

• Satellite L305D-S5934 Pro - keyboard will not perform a double click

  Hello

  I have Satellite L305D-S5934 and the keyboard does not work properly. I can use the keyapad to point but it wll not perform a double click. Left click will not work... I think it's a hardware problem, I have tried resetting everything and downloaded synaptics at least 3 times.

  Anyone have any suggestions?
  It does not work with a USB mouse. It is still under warranty, but the agent wants to keep my laptop for 6 weeks to fix while they get a part starting from the United States. and they don't test it for me for free so I'm not even sure this is harware related to 100%?

  Hope someone can help me, thanks

  Hello!

  Do you mean before the touchpad mouse left button or tap on the touchpad function?

  The listen function must be activated first. This means click on the left button of the mouse TouchPad.
  Go to control panel > mouse > device settings > settings > Tapping. There you can check if the function is enabled or not.

  Good bye

• Some keys on the keyboard for Satellite A200 do not react

  Hello to you all.

  Recently, I had serious problems with a few keys. They do not react when I press on them. Oddly, enough it happened one day where everything worked perfectly. Currently a non-flexible solution (: @) is a mix of keyboard and Vista on-screen keyboard. I have spilled something on my laptop that I take great care of it. Keys not working do not are:

  K k
  U u
  I have I
  M m
  J j

  7
  8

  ,
  *
  

  Up arrow
  Arrow pointing down

  I also remember the day, this problem occurred (and since then, every day when the laptop boots) in startup screen logo is continuous-interminnent beeps. Alsowhen Office appears and then press 'Start' (Windows logo) I see constantly writing in the prompt search (under "all programs") and that if I press the right arrow it wll not stop. Any ideas? I guess from a driver issue... I hope someone help...

  P.S.:strangely (with the exception of added value package) I can't update my Toshiba laptop (they all fail with an error). First, I do the update of the BIOS?

  Hi Herc,

  The description of your problem doesn't quite sound as if your keyboard has developed a fault, particularly in failing the grouping of keys held. If you have access to a USB port on the keyboard I sugest you try and see if you get the same problem.

  If your A200 is still covered by warranty, then I suggest that return you it to a repairer approved for repair. If your warranty has expired so fortunately replacement keyboards are not only expemsuve and are fairly easy to replace, just try to Google for a suitable provider.

  I don't think that your problem is related to software or drivers

  Kind regards

• I can not re - rip library in new MP3 albums

  I tore 188 albums on my player windows media without problem. Bought a sansa player and sync all my albums on it without any problem. I bought a Nook Tablet and synced all my albums on it, but the meal cannot read the format. I tried to tear pictures of new seleting the mp3 format, but the library wll not show them in the new format, I think that are showing what was initially torn which are the same albums. What I am doing wrong?

  Hello

  Try the steps below and check if the problem persists.

  1 open Windows Media Player

  2. click on tools, Options, then choose tab music Rip.

  3. under Rip settings, change the format to MP3 or WAV.

  4. then set the Audio settings for best quality.

  5. click on apply and then click Ok.

  6 try to rip music and check

  For more information, see:

  Change settings for ripping

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-ripping-music

• Dissemination of problems-Church of Media Player will not automatically play more

  In the past (3 days ago I also an automatically upgraded to Media Player 11) when I played a broadcast of the Church, he played on media player no delay or anything, now it wll not play automatically. Now I get a pop up asking if I want to download the show (never done that before), when I say yes it takes a long time, after it is downloaded it said: he can't read mp3 or something like that and if I want to open anyway, I say yes, but I get a picture but no sound.  I did the windows fix solution, he said that I had no decoder, so I ordered and downloaded the Corel DVD Xpack now I get no picture just a line grey and not sound, and when I try additional steps I get a still picture and no sound.  So I did the fix it solution now it says something codec, but he did not repair because it finds problems.  Help, please.

  Hello

  1, what is the exact error message you get?

  I think to read the files, you may need to install the codec supported for your file play on Windows Media Player.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Windows xp pro, how can I change the use of the computer of "business computer in business network" to "personal computer in a home network?

  I can not connect to internet on my secure network.  Windows XP, I cannot enter the phrase/password network.  Whenever I go in to connect to the network, it asks that the network passwork, I come home, but he just keeps working and does not connect to the network, even if it recognizes the network and it has a strong signal.  I also tried to go into the configuration of the network and tried to change the use of the 'enterprise on a business network' computer personnel in home network, but when I restart and go back, he changed to the computer of the company and the network password is returned to an entry earlier.  I wll not accept any change in the password

  Hello

  If the computer still needs to be used on the on the talk of the Business IT people business network they probably configured to adapt to their network.

  If the computer is no more a professional computer change the network configuration to work as a peer-to-peer network.

  http://redmondmag.com/articles/2001/12/01/Windows-XP-PeerToPeer-networking.aspx

• my recovery disk should have systems set of restore points?

  I use Vista Home premium 32-bit with Vista SP 2

  I noticed that when I go to check on the system restore points created, there are two disks

  Drive C

  Drive D (which is system recovery disk)

  This is the way it shows under system restore

  'Create restorepoints on the selected disk/drive '.
  Player C has a check which means w ill create restore points
  Drive D/drive recovery does NOT have a check, which means NO wll not created restore points

  This is how it should look? This recovery drive has NOT created restore points?

  That's ok.  The recovery disk does not change when you use your computer, so there is no need to restore points.  This drive has been installed at the factory, and its purpose is to restore the computer to the way it was when it was new. Boulder computer Maven
  Most Microsoft Valuable Professional

• Canon MG7100 prints but will not scan after update of the iMac? How to fix?

  Canon MG7100 worked very well with the iMac - scanning and printing. After doing the updates of the iMac and installation Siri scanning does not work. Always printing. The printer/scanner Canon said - Set PC to start scanning - I have MG7100 added on the iMac. I opened (and re-locked) firewall to let in the Canon UJ utility. I deleted the all-in-one Hi - and added MG7100.

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0100535401.html

  doesn't look like canon has a printer that takes in charge the newer versions of Mac OS x, if I were you I would take contact them to see if they plan on support of new versions, apple made no drivers for the hardware they don't and if hardware manufacturers does not provide a working driver head can group with the new version of Mac OS x We have to rely on manufacturing to have a download on their page

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!