Problem of micro card SD of Sansa e250

Similar Questions

• Micro SDHC not recognized Vista when the card is inserted in Sansa E250

  Hello

  I have Sansa E250. I used to have the 1 GB microSD card and I was able to access it on my computer with XP.

  Recently, I bought 4 GB micro SD and SDHC cards. Now I have Vista on my computer and when I connect the MP3 player with HLA card installed on a computer I'm not able to access removable drive of the card and I get an error message.

  Is it a Vista thing? Is there some drivers or firmware that I need to install to be able to use my new card CD?

  How do I install it on my Sansa?

  Thank you

  I installed the Rockbox on my Sansa e250 and it works very well and the new 4 gb SD card works as well.

  I can't load the image well then rockbox is on my presets of radi got all erased. But these questions are fine. I can always switch back to Sansa Firmware.

  Thanks again for your help

• Sansa e250 2 GB limit card memory?

  Is the limit of the size of the memory of card Sansa e250 really 2 GB or someone was able to recognize up to 8 GB or maybe even 16 GB with some brands of SD Micro cards?

  Depends on whether it is a v1 or v2 model.

  V1 is limited to 2GB (SD) unless you install the 3 rd-party firmware, alternative called Rockbox.

  V2 will handle the SDHC (up to 32GB) native format.

• Problem with sansa e250

  I have a proplem with my sansa e250 after upgrade. Now, I can't start my sansa. The sansa is frozen. Simply appear SanDisk logo on the screen, the blue wheel lite and that's it.

  I tried several times to reset it by pressing the power on button (menu) for more than 15 sec. It power from this, but when I try to start it again the problem persists - sansa e250 froze after sandisk will apear on screen logo.

  Please help me

  I'm in recovery mode. I downloaded a safe recovery tool (e200fw01.00.12), but when I start it up I got a message from what ERROR Application failed to read the version details!

  I find that I have to put some mi4 file in 16 Bit file. What is it? Where can I find it?

• My Sansa e250 v1 is VERY strange (memory loss)?

  Today, I downloaded new music and went to synchronize on the e250. My e250 2 GB (v1: 01.02.24A) was dead at first, so I connected on the computer to give a head start to recharge before starting synchronization. After that the music was supposed to be safe on my camera, I turned it back to check and make sure that it is there. Instead of some 300 songs , I've had before (I also have a Micro SD card of 2 GB in there) I find only 11, with the logo of what meant he was on the SD card. (If none of you have the small logo beside it, I apologize, but that's what mine did). When I open the files on my computer first, and then in my Windows Media Player, it shows all my music on the device and also says that the memory is always repeated. When I look on the device itself, he has only these 11 songs. I tried disconnecting and reconnecting the cable charger/sync, reset the battery, everything I can think of.

  ((On a side note, my computer don't bed the SD card when it is in the first mp3 player - it is not since after the first two times, I synced music with her inside. But there were songs that were the symbol of the SD card next to it in the drive. In addition, since the player has had the inside SD card, a small green window pops up on my screen after start of the original mp3 player, saying "refresh database". This has not been a problem until now, but I wonder if this is normal?))

  Any help is appreciated, thanks!

  If any of you have this problem: I just fixed mine.

  Make sure that you back up ALL your music files if you want to resynchronize, because the only way to get rid of this weird problem is to do a complete memory dump - this means entering the Sansa e250 files on your computer WHILE THE DEVICE IS PLUGGED INand delete ALL SONGS, ALL OF THE VIDEO, ALL of these files. NOT the files themselves, those you need. Just the CONTENT of them. Then go into any media player you use and re - sync all. Or what you want there, is irrelevant. Then you have the music in the back. I have no earthly idea as to how it happened. All I know is that I fixed it.

• Connect Sansa e250 to my audio devices via USB

  Hello

  Connect my sansa e250 to my Denon amp via USB only pieces of audio file of fixed drive will not play anything micro sd expansion port why? Using the sansa E250 01 software
  I would like to say good quality is achieved via USB and I can use the Denon remote

  When the sansa e250 USB connection port denon amp using rock box will not work
  Let's get only by jack stereo 1/4″ but will play music mm two disks

  Help

  Hello
   
  Yes, I should of said unit Sansa MSC mode, if I put in the MPT mode denon amp will not read the sansa e250 arrives with disconnection.
  I know that's not very common. I just bought a sansa fuse with more memory, but I was just wondering if there is any way to be able to have access to the micro SD and card.
  Thanks for the reply.
  Terry

• Sansa e250 questions

  Hello

  I'm new to this Ant thing, and I don't know if this problem has been addressed before, but it would be great if someone could help me!

  I got my sansa e250 for about 2 or 3 years now, I guess, and it has always worked well.

  I turned on the other day and tried to play a song, but it says "wrong track." I know that this can happen sometimes and thought nothing of it. but he spent with all the songs I played.

  In addition, the player was all deleted music out of my playlists and when I went to view album and artist, he said that he had nothing. but according to the song, he said I had 754 songs out there.

  I connected it to my computer and deleted everything on the player, it works and it was always in the same situation, with 754 songs, artists or albums and they were all the "bad tracks!

  very frustrating. I have tried everything I can think of, like everything reset and take the battery, all with the same result!

  When the device is plugged into the computer, it shows all the folders are empty. It is said that no space of memory has been used, there still 1.8 GB of left of the Hall. (what a 2 GB device)

  so if anyone knows what the hell is wrong with it or what can be done to remedy this, it would be greatly appreciated!

  Thanks in advance!

  It is possible that your cord is wrong. But try to reformat via Recovery Mode. I hope that your E250 is a unit v1 - you won't see Welcome to the recovery on a v2 Mode, so we need to try something else.

  It's the excellent Markster step by step:

  Now, to solve the problem.  The easiest way is to just reformat the drive in Recovery Mode.  This will delete all your files, however.  Here's how:

  Turn off the player.

  Slide the HOLD switch to the locked position.

  Press and hold the RECORD button when connecting to the PC.

  RECORD output once you see "Welcome to Recovery Mode" on the screen of the reader.

  You should now be able to find that a new removable drive in my computer called 16 MB-FORMAT.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  Are we clear on that?<>

  16 MB - FORMAT open and create a new folder named sansa.fmt on it in the root directory.  You can now slide the HOLD switch to the unlocked position, use the remove safely icon and disconnect the player.  It will be noticed the sansa.fmt folder, and he saw, format itself and reboot.

• Sansa e250 45 second each time start?

  Is this normal for Sansa e250 refresh database whenever it is turned on, even if nothing has been added or removed from the player?

  It's annoying to have to wait 45 seconds until I can start listening to my music, listed on the radio or use the voice recorder to record something

  If it is a v1 model and you have a card inserted, Yes. It will refresh the database whenever you turn it on. If no memory card is inserted, it will not be.

  This changed when the v2 of the e200 Series variant arrives on the scene. A different processor and firmware eliminated the need for the update at startup when a card is detected in the slot.

• Cannot sync Sansa e250 with Windows Media Player on Windows Vista

  OP: MP3 player does not connect. Sansa e250. Has worked before. Windows media player does not. Meter turns, but does not sinc for Windows Media Player

  Please help me solve this problem.

  Hello paj137,

  1. do you have an error when attempting to sync with Media Player, or everything just doesn't detect media player?

  2. don't you make changes to the computer before it stopped working?

  3. will the player detected in Windows Explorer?

  First check to see if the drive is detected on your computer. Try to copy the files of music from Windows Explorer.

  Most MP3 players will appear as a "disk" on your computer, and you can browse the files on them by simply opening.

  If you can do this, you should be able to copy / delete / move files between the MP3 player and the computer.

  Also try to set media player to manually synchronize with Media Player. This article should help you with that:

  http://Windows.Microsoft.com/en-us/Windows7/sync-manually-in-Windows-Media-Player

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Tecra S5 does not recognize the SDHC 4 GB micro card

  Hello.

  I have a 4 GB microcard SDHC and the reader of my laptop does not recognize the card...

  Help.

  GR Arno

  Hello

  Are you sure that this laptop supports this type of card?

  As far as I know THAT these cards are compatible:

  Card SD - 8 MB - 2 GB
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  Only the SDHC card and not SDHC micro card is supported

  Concerning

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• Alcor Micro Card Reader

  When I tried to download pictures from my camera card reader memory chip does not recognize the memory chip. HP has a update driver for the card reader Alcor Micro, but it would not be installed. My computer is a HP Pavilion p6-2378, Win. 8.1, 64-bit, the Alcor Micro Card Reader Driver is for a 32 bit, so I was wondering if there was a way I could get a more recent program of Alcor Micro Card Reader because when I went to the Alcor society, they said that they only sold to companies like HP who built the computers. I was told by one of the technicians of HP to reinstall the Alcor Micro Card Reader since the recovery disks, but if the Alcor Micro Card Reader would not install new drivers why I would bother to reinstall. He don' your sense no. Is there any help out there?

  Thank you for the additional information.

  Have you tried to install the 64-bit driver for the card reader I have provided in my link above (64-bit driver)?

• problem with memory card reader

  bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

  Hi PatPeoples84,

  Yes it is possible, unfortunately it will probably come during the service.

  I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

  Thank you
  Cory

• Micro card

  I bought a 32 GB micro card for my Tablet Iconia One 7 of girls. I inserted, I guess well, but when she attempts to add apps he always says not enough memory. She has even removed a bunch of other apps and photos and always gets the same response. I'm not a technical person but I just assumed that as soon as I put the card in it would leave him to add more apps.

  No, the SD card allows to organize the data of the user as music, videos and photos, but applications that must all be on the primary storage. Google has changed that with a 4.4 version and it has been with us since then. If she had a lot of data such as pictures and music, it should be check to make sure that they are moved to the SD card and not sitting on either the internal memory or worse only at a time.

• Card MicroSD of Sansa e260 fails

  I want to insert a 4 GB MicroSD card in my Sansa e260, but it does not recognize. The Sansa e260 has some kind of limits, because I couldn't find anywhere in the manual.

  If I use a 2 GB MicroSD card so it works, but not 4 GB.

  The 4 GB card works... Tested on my phone and are formatted in FAT and FAT32 once.

  Thanks in advance

  Version 1 (v1) series e200 (distinguished by the version of the firmware with a 01) models, confined to format SD cards, the largest of which is 2 GB, unless you want to install the 3 rd-party firmware, alternative open source called Rockbox.

  V2 models can handle the SDHC (high capacity) format memory cards, 4 GB and up to the current maximum of 16 GB in native mode. The v2 are identified by their version of firmware starting with a 03.

  Looks like you have a v1 model.