Satellite A110-180: command buttons open wrong applications

Similar Questions

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• Satellite A110-180 - update of the Bios for Windows 7 and Linux

  Hello

  I want to change the following settings in my bios on my laptop satellite A110-180
  * AHCI for SATA
  Disable the IDE

  But none of these options.
  So I thought that maybe I should update my bios.
  I found the download page, but there are 2 options: Windows Vista or NO vista, but I want to dual boot windows 7 and linux.

  Which one should I download, or is there another option to change the settings?

  Thank you!
  Bart

  Hello

  Satellite A110 does not support these options (SATA AHCI).
  The update of the BIOS will not help you!

  Linux is not supported and therefore, you will not find any special BIOS for Linux OS!

  The two BIOS updates are for Win Vista or OS independent.
  Therefore, if you use other than Vista OS then you should throw the update of the independent BIOS to the BONE!

  But as mentioned above; both options will not appear after the BIOS update!

• My Satellite A110-180 always do a RAM test

  Hello.

  I can't allow a quick start (start without the RAM test) in my cell A110-180. I upgraded my RAM from 1 GB to 3 GB and I would like to disable the standard ram test when the laptop starts up because now becomes very slow. I've updated the original Bios HTW20 V1.30 for Bios HTW20 V2.00 but in the new does not have this option either.

  Can you help me?.

  Thanks in advance.

  > I upgraded my RAM from 1 GB to 3 GB and I would like to disable the standard ram test when the laptop starts up because now becomes very slow.
  How does something like this happen?
  After RAM upgrade boot is actually not different as before. Portable operations are faster.

  Can you please tell us which module RAM do you have used for the upgrade?
  I checked the laptop computer's specification and memory modules compatible RAM for your Satellite A110 are:
  1 GB-PA3411U-1M1G
  2GB - PA3513U-1M2G

• Satellite Pro L20: Command button on TouchPad collapsed

  I visited two other flaws with my laptop in other posts, compared to those, it's very minor but its still very annoying:

  The command button left TouchPad on my laptop, usually evenly supported by the bottom, seems to have given way to one side, so that it does not work with the same action of spring on one side of the left key. It wobbles like a tooth loose.

  It's this kind of problem easily solved? Until I get a USB mouse, I'm stuck with the TouchPad, but his persistent plastic surfaces scratching against the other is infuriating!

  Your ad just brief comment: I noticed that the quality of the buttons of the mouse on laptops is not the same. On my Tecra, it is really perfect and pressure on any point will give the same result, but on laptops of low budget, like the series L, it is not the case.

  I know it's pretty annoying, but unfortunately there is nothing to do. Because of this, the use of external mouse is reasonable.

• Satellite A110 - 180 PSABOE - Bios update failure

  Hello.

  I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop does not start because I think I lost the bios of programming. I test this http://laptopforums.toshiba.com/t5/General-Technology/Satellite-A215-S4747-Bios-update-failure/m-p method but the laptop will beep 3 times every 2 seconds without stopping and with black screen only. The CD-ROM unit tries to start but that's all.

  If anyone knows a separate solution that replace the motherboard, please tell me to probe it.

  Thanks for your help.

  > I've updated the bios with an update from the center of toshiba, but the process is unresponsive and I had to restart the computer. The result is the laptop doesn't start

  To me, it looks like the BIOS update procedure has no
  I'm afraid you have no other alternative besides contacting an ASP using m.

  It seems that the ROM module is not flashed on the correct order and the technician could try to relash Rom module with a BIOS version of crisis

  I would recommend contacting the local ASP in order to solve this problem

• Satellite A110-180: How can I change the layout of the keyboard?

  Hello

  I hope I could help you guys

  I reformatted my computer and install a windows xp OS... the placement of my keys looked like the standard keyboard...

  How can it go back to its own décor... because im confused with the keys every time I type.

  hoping for a quick answer. Thank you very much!

  Post edited by: spectrex909

  Hello

  Looks like you are using a wrong keyboard layout. Thin I language settings are bad!
  Maybe you have a US keyboard and the settings are set to the United Kingdom?

  Please check this in the dashboard-> regional and language-> languages-> details options.
  Here, you can add a second language or you can change one to another provision of the keyboard.

• Satellite M100-180: put wrong password - error now 'system off 65017 '.

  I had technical problems with my Toshiba Satellite M100-180.

  Let me tell you a story.

  I bought my laptop on 13/12/2006 model is Toshiba Satellite M100 - 180 T2600 (2.16) G 1/100; Card mother HAQAA.

  So, a month ago my laptop could not start due to asking me a password. HM... I never put the password on my laptop. So, I had brought my Toshiba at the center of service to this problem. So they tried they couldn't achieve success even if they strap the CMOS_CLR1.

  Triple entering the wrong password my laptop gives this message: "system disabled 65017." So, as my Toshiba warranty is the guy in the service center have offered to replace the motherboard.

  It seems too expensive, given that I could buy another new laptop (okay, it will, no doubt) for that price.
  Really, I don't like this idea, because it's too expensive and I like really my laptop.

  The guys in the service center said my private that, most likely, there is the content of the EEPROM was twisted. And if I'm going to find the same other portable executables, they could use his image from EEPROM to save my Toshiba.
  So, the question is.

  Where to find this EEPROM image that fits my phone or how to solve the problem?

  Please, help me, it's a question of work and success.
  Please, I beg you. I'm really in despair...

  I know you answer.

  Hi mate

  I think the guy meant the ROM module that is part of the motherboard and BIOS there maybe stored such ROM module needs to be replaced and would avoid the replacement of the motherboard
  But this is only my personal opinion

  Maybe you could buy a second-hand M100 where the motherboard is not too bad then just the motherboard could be changed and would not be expensive as new motherboard

  Welcome them

• Command buttons and lights not working not properly - Satellite U400

  I am currently facing a problem with my Satellite U400, which runs under Windows Vista / Bios v3.00.
  First, the control buttons no longer work, as when I press on them, nothing more. It was that when you press on, the LED lights for a while and then come back to life.

  Now, LEDS are constantly lit. Even when the laptop is turned off and the cable is removed.

  So far, I tried to turn on and turn off the LED option in the Bios (that is turned on and off the LED on the touchpad and the logo of Satellite, but not on the control buttons). I uninstalled and reinstalled the Value Pack from recovery CD - no change. I deleted and reinstalled the Windows called devices: ACPI fixed feature button (thought this might help).

  Is there anything else I could do?

  Once the problem is resolved, I wonder if the command buttons can be customized. For some reason I do not seem to find the appropriate program to set those.

  Thanks for any input.

  Hello

  Someone suggested this work around:
  You must install the utility to control on the one hand, and where to install the value Pack, choose Advanced Options and uncheck the Support Button TOSHIBA.

  Welcome them

• Satellite A110 - after Vista upgrade media control button does not

  Hello, could someone help me?

  I upgraded my laptop Satellite A110 to Vista. Media button control does not work after upgrade to vista.

  Help, please...

  Hi guys

  You consider right. You must install the Vista Toshiba value added package.

  I found this TSB Toshiba

  TOSHIBA value added V1.0.25 for VISTA contains 3 different version. What is right for my cell phone? http://support.toshiba-tro.de/KB0/TSB7801XK0005R01.htm

  You must check your key for laptop specifications and then use the right file and drivers.

  Maybe this could be some help how to determine the amount of buttons on the right:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26254

  Best regards

• Creative Cloud Desktop said that there is a download error when I open the applications tab. I tried the button Reload Applications with no luck. Any ideas?

  Creative Cloud Desktop said that there is a download error when I open the applications tab. I tried the button Reload Applications with no luck. Any ideas?

  John has provided all of the above resolution, could follow please this new https://helpx.adobe.com/creative-cloud/kb/Download-error-apps-tab.html

  In the case where you do not succeed please contact support.

  Concerning

  Stéphane

• Open a State of a command button - statement of Script

  I want to open a report in a dashboard via a command button.
  
  What would be the script to do this?
  
  Also, how would return to the dashboard of the report once it is open?

  Console.Writeln ("cmdRpt")
  "" "ActiveDocument.Sections ["Report"]." Activate()

  The code above is for a command button with the script to access an individual 'report '.

  To navigate to the dashboard, simply select the dropdown under the menu icons.

  Good luck.

• Cannot start my Satellite A110-275

  Hello

  I had one laptop Satellite A110-275. After the first days, when I bought someone spilled a glass of water. I send the laptop on a center here in Canada they have change the motherboard. Laptop worked for several months and a few weeks ago are starting to make me a problem such as:
  I start it and everything seems ok all lights are blue lit, I hear when the beginning of the video card fan and nothing appears on the screen.

  In the past after a few opening and closing laptop computer started but now its saying DEAD leds.
  Could be the processor or even once the motherboard? I already changed the 2 GB memory and nothing.
  Could someone help me with some ideas?
  Thanks in advance.

  Processor A110 - 275 Intel Core Duo T2400 satellite clocked at 1.83 GHz 2 GB of 533 MHz DDR2
  Thank you

  Hello Marina

  Please don't get me wrong, but I don't think there is that you can only do about it.
  Of course, there is a serious hardware problem, probably with the motherboard. I don't know which component is troublemaker, but if your computer laptop doesn't react at all, it can be electronic power supply.

  It may be the CPU. It may be the motherboard, but you must understand that it is not possible to provide an accurate diagnosis on this path. What you need is a professional help. Laptop must be controlled by diagnostic tools and it can be done in only authorized service. Contact them and explain the situation.

• Satellite A110 media Apps for Windows Media Player do not work!

  Hello, I have a Toshiba Satellite A110 Notebook since 2006.
  2 days ago a friend formatted my laptop. In order to make the systemstart a bit faster, he stopped a few applications of Toshiba in the configuration of the system. My laptop now very well VannerieUn.

  But here's the problem: before the format I could use these multimedia applications useful for my Windows Media Player - mainly because of laziness to switch between programs during the work. :-)...
  But now, they no longer work. :-(

  Is it possible, that we stopped a request, which is important to make these applications to run?
  Or is an additional driver?
  Or they work only in cobination with Windows Media Player 10. (now, I installed WMP 11)

  I hope for your useful replies.

  But think, that I'm not this great computer genius! ;-)... :-(

  Try to enable all disabled applications. Go to START > run and write MSCONFIG inside.
  When the System Configuration window is open go to the Startup tab and allow all applications with blank Startup Item.

  Restart your computer and check if everything works well again.

• Satellite A110-293 hangs in hibernation mode

  Toshiba Satellite A110-293 is suspended in the mode hibernate after opening the cover of the laptop. Nothing happens after tapping the keyboard, the mouse clicking or any other activity (i.e. opening DVD - ROM etc..)
  The cover was closed as usual with some running programs. After about 10 minutes, I tried to open but the whole system was in hibernation and he's still asleep.

  Please help me to restart (fix or smth) laptop, because I have not found any restart button.
  Thanks in advance.

  hibernating your computer is off; "Hibernate" State is very different from 'sleep' (in which the system is not completely off)
  Take a look at:
  (1) http://en.wikipedia.org/wiki/Hibernate_%28OS_feature%29
  (2) http://en.wikipedia.org/wiki/Standby_mode
  so... you have to press the power button to 'wake up' a computer that was previously placed in hibernation. have you tried to press the power button?