My Satellite L850-A921 closed and could not start

Similar Questions

• Satellite L300-1BV - error windows could not start

  When I try to start the laptop it know
  "Unable to start windows. To address the recovery of insert problem disc etc, but I have nothing of this
  below it I got an error message

  file: \windows\system32\winload.exe

  STATUS: 0XC000000F

  Info: the selected entry could not be loaded because the application is missing or corrupt

  can anyone help?

  Of workaround I posted in another thread, but it should work in your case too.
  Try this:

  Press F8 immediately after that the laptop has been turned on.
  Then choose the first option called fix my computer.
  Then a new window should open and there you can choose the option called Toshiba recovery.

  Please note then this procedure would start the Toshiba HDD recovery and the BONE to relocate again. This would be to format the whole HARD drive and set the OS to the factory settings.

  Goodbye & good luck

• Satellite L850: Catalyst Control Center does not start

  Hello, I have an AMD 7670 m dedicated graphics card and when I install the AMD display drivers downloaded from the toshiba site, the Catalyst control does not start and he also seem to have problems with the usb ports and my wireless stops working for some reason any.

  Is that what I can do on it or am that I better use the downloaded drivers directly from AMD? Thank you

  Maybe stupid question now, but why do you need it? Have you been preinstalled OS with your laptop or you bought for laptop computer without an operating system preinstalled?

  What model do you have exactly (L850-xxx)?

• Satellite A - USB issues and would not start

  It started with my computer (laptop) from freezing. Then my USB mouse leave, make me use this tablet (I hate that seriously), then the computer would not simply start so I removed the battery, the computer starts, and then it froze again, put the battery back in, computer started again. Things continue to go.

  Today, I got the Toshiba (my baby) at Staples (free checking up), they found nothing wrong. Got home, starts very well - the 1st time, I tried to reinstall my USB mouse and quess what - would not start. Out the battery, and here we are.
  Oh and by the way - I would like my rear USB mouse - I said "I hate this tablet.
  Battery has been for about 2 hours now without any problems

  Can anyone HELP?
  Thank you

  What computer Satellite phone do you have?

  Have you tested without USB mouse? Maybe this is causing the problem.

  And have you tried a BIOS update? You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

• Satellite A135 black screen and does not start

  I have a Satellite A135 with windows vista and I have not used in more than a year.
  I went to use it today and it turns on but the screen is blank. I can't even see not the bios.

  I tried the usual things, connect to a monitor, removed the chip of ram from the back and tried another one, I also tried power alternative only with no luck.

  All the ideas it might be.

  Thanks for the help

  Hello

  If the BIOS page does not appear, then it s a serious question.
  Seems that the motherboard is dead.

  In my opinion, a technician should check this section first, and perhaps you will need a new

  Motherboards are parties, then perhaps it s not an option for you

• Empty Connections window network and could not start the network connections service

  Problems with Verizon router and during diagnosis discovered that the network connections window is empty (found by clicking on change settings for the network and sharing Center map).  We are currently connected to the Internet with the new router and Ethernet cable, but the cannot connect wireless (what we could do before) - apparently not to display icons in N.C. window is not necessary to have connections.  Found a reference to the network connections service and check it is running as a solution to the window being blank.  The service is not running, and when I try to launch it I get "Error 1083: the executable program that this service is configured to run in does not implement this service."

  I've seen a lot of suggestions on fixes for the problem of the empty window.  I did the sfc /scannnow and found no problem.  I tried to update the network adapter driver, but it was very good.  None of the solutions seemed appropriate perfectly adapted to this situation.  Is this really a problem?  Any suggestions on what to do about it?  We are about to use an USB adapter until our connection speed and I want to make sure that everything works first.  Thanks for any help.

  Hi EWright1, we will check the settings of the service.

  Click Start, type CMD. EXE and press {ENTER}

  Type the following command and press ENTER:

  REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  Copy the output and post with your response.

  Ramesh,

  Thanks for the suggestion. The output of the query to register below.

  C:\Users\Edward > REG QUERY HKLM\SYSTEM\CurrentControlSet\services\Netman

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman
  DisplayName REG_SZ network connections
  ImagePath REG_EXPAND_SZ %SystemRoot%\System32\svchost.exe - k netsvcs
  Description REG_SZ objects manages in the network and remote access connections folder, in which you can view the network local and remote connection
  .
  ObjectName REG_SZ LocalSystem
  ErrorControl REG_DWORD 0x1
  Start REG_DWORD 0x3
  Type REG_DWORD 0 x 120
  RpcSs DependOnService REG_MULTI_SZ
  ServiceSidType REG_DWORD 0x1
  REG_MULTI_SZ RequiredPrivileges SeImpersonatePrivilege\0SeChangeNotifyPrivilege\0SeLoadDriverPrivilege
  FailureActions REG_BINARY 8051010000000000000000000300000014000000010000006400000001000000640000000000000000000000

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Enum
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Netman\Parameters

  Hi EWright1,
  Follow the steps listed under "Reset Network Connections Service registry keys" in this URL:
  Difficulty for Service (Netman) 1083 in Windows 7 network connections error:

  http://www.Winhelponline.com/blog/fix-for-network-connections-service-NetMan-Error-1083-in-Windows-7/

• Printers are lost after installing updates and could not start get error 1053 service print spooler service message has failed to demand launch or control in a timely

  Original title: print spooler does not - error 1053 - Windows 7

  I have a HP Pavilion dv4-511 with Windows 7.  2 weeks ago I ran a Windows Update and all my printers installed have disappeared after a reboot.  I did a system restore and they were all back.  Yesterday, I installed an update to a software (Soonr) and it's the same thing.  I clicked on the print spooler service to see if I was able to restart and got the error 1053 saying "service did not respond to demand launch or control in a timely." If I click on "Add a printer" in the menu devices and printers, I get the following message: "Windows can't open add printer."  The local print spooler service is not running.  Please restart the spooler or restart the machine. "I rebooted the computer and the same thing continues to happen.  I did a system restore and the printers are all back.  It seems that every time there is a change to any software, it creates this problem.  Help, please! Thank you.

  Hello

  Welcome to the Microsoft community!

   

  When the updates are installed, the printers will be lost and when you try to start the print spooler service, you get the service saying error 1053 has failed to demand launch or timely control.

   

  The problem may occur if some system files are corrupted or because of malicious content.

   

  I suggest you follow the steps mentioned below:

   

  Method 1: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: Scan the computer to remove all possible malicious content

   

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Satellite M40-129 BSOD and does not start correctly

  Hi again.

  I was working on my computer since my last question, but (almost) nothing has changed.
  The problem:
  My laptop is booting, but only on very rare occasions.
  What can happen:
  -l' screen stays black (almost 50% of cases)
  -L' splash screen (Toshiba - in touch with tomorrow) becomes visible and nothing happens then (40%)
  -Notepad starts "correctly" (10%)

  If the notebook starts correctly there are 2 options:
  1st: I try to start Windows: it crashes with a blue screen with the nice request an update of the BIOS.
  2nd: I boot SuSe Linux: EVERYTHING WORKS!

  I tried to update the BIOS the traditional way, although it is difficult to get it started it runs until shortly before the end and restart the computer.
  I don't see any confirmation screen as Im used to.

  What I assume, that the associated BIOS startup problem.

  I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  My question is: is this also possible with a CD (have no floppy drive), if yes: how to proceed?

  I wanted to give a point of service of Toshiba, but if they can't fix it, I always have to pay 50 euros. I have to pay money to get my BIOS restored, but the service seems to be just a "-delivery service" the real point of service and I would like to speak with a qualified person, first :)

  > I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  > My question is: is it possible with a CD (have no floppy drive), if yes: how to proceed?

  Hmm, you said that you have already received the traditional BIOS files from the ASP in your country. Then maybe you should take a look at this Toshiba document:

  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

• SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

  I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

  My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

  I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

  I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

  I'll be dilly, or is it a problem in general, experienced by others?

  I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

  I appreciate your time and efforts.

  Hello

  I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

  Please, use the start command to start in the background of a single command window / batch script:

  beginning of "locator" cmd /c sqlf locator...

  beginning of "server1" cmd /c sqlf server...

  etc.

  Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

  Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

  Thank you

  Felicia

  Post edited by: SumedhWale

• Qosmio G45-AV680 - Windows could not start

  My cousin has this laptop and could not start the system. It displays the message:

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you don't have this disk, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f

  "Info: the boot selection failed because a required device is not accessible.

  I tried to go into safe MODE, but it cannot do so. It starts to load the drivers, but it stops at some point and will not continue...
  The problem is that she did not have any DVD with laptop. I guess that the Vista operating system, that comes with it is the special partition on the hard drive, but how can I access it? How can I reinstall the system? I don't mind if I lose data, I used just to make it work...

  If DVD recovery is not assured that means installation of recovery can be started from the HARD drive. I don't know how it works exactly on cell phones in the United States. Try pressing zero button after starting upwards to see if HARD drive recovery option can be started.

  By the way: check the Toshiba U.S. support under http://laptopforums.toshiba.com/tshb/ forum
  Maybe someone there can explain how it works to start the installation of the OS on the HARD drive.

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• Windows could not start on Satellite L510

  HI :)

  I'm not very tech savvy, I've only had my laptop a month. And yesterday, when I turned it back on I got this message...

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem: Insert your windows installation disc, and then restart your computer
  If you do not have the disk, contact your manufacturer computer or system administration.

  file: \boot\bcd
  status: 0x000000f
  Info: an error occurred trying to read the boot configuration

  I have been all over these forums and the internet looking for a solution, but no luck. It's the weekend, so I can not communicate with the service line.
  I would appreciate a process step by step what it is, that I need to download or reset. I do not have the windows installation disc, because it did not come with my laptop.

  I really appreciate your help in advance ;)

  Hello

  Well, the error message says everything to me. Insert the Windows disk * or * contact manufacturing (Toshiba). ;)

  By the way: it would be interesting to know if you can boot into safe mode. Check it!
  If so, you may start the HARD drive recovery. Therefore, select Repair my computer in the Advanced Start menu and follow the instructions on the screen.

  Yes, with the laptop didn't come a disc, but you can create one!
  Please read the operating manual always first.

  Now it s too late to create such a floppy, but you can order directly into a new Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.