my screen dulicate is lime hue whynot even

Similar Questions

• Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings

  Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.

  Hello JPMain,

  Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.

  I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.

  The backup of your iPhone, iPad and iPod touch

  Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.

  Have a great day!

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• screen resolution wrong, but can't even see Save or Cancel below to change

  OK, I'M NOT the RIGHT PERSON COMPUTER... I CONFESS... BUT I MESSED UP RIGHT NOW... TRY TO MAKE THE LARGEST FONTS ETC... AND MESSED UP MY SCREEN RESOLUTION... WHAT I TRY TO DO IS CHANGE OF SCREEN RESOLUTION BUT I CAN'T SEE EVEN SAVE OR CANCEL AT THE BOTTOM OF THE PAGE TO DO SO... AND I NEED TO MAKE THE FONT SIZE MORE SMALL ALSO, BUT STILL, I CAN'T SEE HIM SAVE OR CANCEL BUTTON AT THE BOTTOM OF THE PAGE... WINDOWS VISTA BASIC INTERNET EXPLORER 9... Please help...

  By pressing the 'Enter' key on the keyboard means save or OK. You have no need to see the buttons just press the Enter key.

• My screen keeps dimming every few seconds, even if I changed the settings and saved!

  Hi I have Windows 7 and I have passed to the control panel and changed the settings for power. I got my high-performance switch mode, changed the settings so that it only fades every 10 minutes and saved. However, my computer keeps dimming of the screen at very low about every 7 seconds! I have to make it brighter, but it fades again! Sometimes it fades it right after she cheer up! I even tried to make a personalized plan, but it did not work. What can I do to make the screen stop all seconds dimming! I've tried everything!

  You are using a laptop computer monitor or a desktop monitor / external?  This is much like a monitor that has its own management food or, as with many TVs, the ability to change the brightness in response to changes in ambient light levels.

• Internet options screens continue to pour in white even after updating firefox.

  Half an hour ago I asked the question: why my privacy option displays a screen empty while other straight screens. Do you have a suggestion to update firefox. Now Privacy works but General screen comes up blank. How can I fix it?

  Hello, you have the addon installed ghostery?
  https://getsatisfaction.com/Ghostery/topics/problem-with-Firefox-32-Firefox-option-is-not-displayed-when-Ghostery-is-active-in-Firefox-32

  a workaround, you can try is to switch to the new interface of firefox preferences that will set the preferences menu in a tab:
  enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.preferences.inContent. Double-click it and change its value to true.

• Firefox 18.0.2 aligns with full screen in Windows 7 (32 bit) even when I slide sideways. Anyone else seeing this?

  Windows 7 align on the net somewhere around 15 FF (FF drag window to the left or right edge of the desktop) has stopped working. FF now aligns only on the full screen. It's really a pain since I often have two Windows Open (FF at the request of the half, such as excel or outlook open in the other half). I keep hope it is fixed with the next version, but I see that this problems with 18.0.2.

  Safe mode is a good suggestion. Snap of half-screen FF has worked in safe mode. I then jumped back to normal mode and started disabling add until I figured out that you caused the problem (FindBar Tweak 0.5.5). All better now. Thank you!

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Wanted: White screen after 10 Windows Update - problem even when back in windows 8.1

  Hello

  I've updated to windows 10 and after a few hours, the main screen of my laptop went blank but my second monitor that I use with a HDMI cable still works.

  Here is a screenshot - one screen shows white and I'm typing this on screen 2 (continue below)

  I've updated my drivers in Device Manager but problem persists, here's my profile for screens and link to full

  (continue below photo)

  

  Complete specifications

  http://Speccy.Piriform.com/results/ZRXCgJC8x3PrsszxBodRVhn

  From my understanding the cables of the screen white screens LCD is still, this problem started after the update of Windows 10 so I'm reluctant to think it's that. My laptop is still under warranty but do not want to send in if he didn't need that I need for work.

  I found some information online saying that a restore Image will not work, but I have an and you can try it if need be.

  Other information found online says that my computer basically "forgot" that I have a main display to get out information in and make the screen and that's why my second screen works perfectly and me might be able to solve this problem with the start of the saving mode and try to fix it from there again I've never done this and don't want to cause more problems doing things like that.

  What could be the best way to go forward with this problem is to say. :

  * Is there a way to check the LCD cables without disassembling the computer. (Don't want to do that, and don't think it's the fault)

  * System Restore will help

  * Where / who should I contact for help in this regard

  Thanks for any help provided and please tell me if you need any other info to help. I really want to to fix the problem rather than take it to a guy or HP

  whitescreenUser

  It's a bad screen. The upgrade of Windows 10 timing is a coincidence. You can continue to use it as a desktop computer with an external monitor forever.

• May not start XP all we see is the arrow on the pointer on our screen... can not restart even in safe mode

  compuer ran great.
  do you have a small email campaign using mailchimp marketing
  everything was going well and next day compuer will not re-start.
  all we see is a blank screen and the arrow on the pointer.
  It does not restart in safe mode. When it goes to safe mode, we see is safe mode on move it left and right and some scrambled words on top. Thank you, Joe

  Joedir,
  Go through this post and make sure that you have tried all the listed items: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  If you still have a problem, then try starting mode safe mode with command prompt and run the following command: chkdsk/r http://support.microsoft.com/kb/315265 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• blue screen virus cannot get the trend even do anything and computer site closed

  I tried to get my dll of rite, and I hit a bad file I guess. He opened and my screen went crazy. I tried to hurry and have a tendency to analyze and I thought that was the case but my screen turned blue and trend was gone. I tried to open it I have but it won't let me then my site closed. I'm on my son site. How can I fix? I tried to go to the system recovery and restore, but it stopped before I could not him.

  Hello

  have you tried safe mode with networking?

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Blue screen of death can't do even not the HD format

  (I did a windows upgrade to 10) -: and could not go back to windows 7 so I had MS reloading windows 7 other)-: so, I found my Windows 7 disc and reloaded a new installation.  I was blowing a long now for a few weeks and all the yesterday, suddenly the blue screen of death appears.  I can go to try and safe mode and restore.  Last night, I pressed the button to do a repair and woke up 10 hours later and it is still twirling without change so I tried to reload a new copy of windows 7 and do a format. He doesn't let me do a format either.  What can I do to recover operational?

  is my hard drive bread?

  Which partitions can I delete (my pc was built by a merchant)

  What partition I want to install windows on?

  Thank you

  Hello Jack,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  Please refer to the suggestions of Andre Da Costa said on November 9, 2009 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-the-selected-disk-has-an-MBR-partition/5aee7be1-3038-4290-A283-75806dc1be1f

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I strongly recommend that you back up all your important files and folders on an external storage device before performing any type of repair operating system or upgrade.

  Also, make sure you choose partition 2 according to the screenshot.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Screen saver goes my screen even when I use it.

  Hi, I have an iMac (late 2015) and the screen to go to the screensaver, even when I use it. My screensaver is located at 10 minutes before you go to the screen saver mode. It happens as if the meter time don't know what I'm doing. It happens more frequently when I change from one application to another. Any ideas why it does this? Thank you.

  Is it possible that you have active corners enabled and you moved the cursor in the corner and trigger the screensaver?

• Satellite S50-B-15N - screen flickers

  Hello!

  I have a http://www.toshiba.co.uk/laptops/sat...ite-s50-b-15n/. Windows 10.

  The screen flickers every morning and every evening (after I come back from work) for about 1 minute, regardless of what I do, that there is normal unless I have push or pull.

  That I can book a Pick Up and return, but there is a tax of 60 books just for the trip if they come to the conclusion that the damage is caused by me. I'm afraid they're going to say that because he has a "hole" in the back of the screen. I know that's not relevant, but of course I can't prove it.

  Video question:
  https://goo.GL/photos/Q2UXDHJw5L2Avbws8

  Photo of the "hole":
  https://goo.GL/photos/oEBH8jcGp8mLTZCq5

  Thank you for reading!

  Sounds like a bad connection of the LCD screen.
  ASP can fix it. I don't think that little tooth is causing the problem, but the ASP would need to open it to see what happens.

• Problem of black screen of HP HDX 16 display of 1160-United States

  Hi, I have a HP HDX 16 1160-United States and earlier, my screen went suddenly dark but if I put my face very close to the screen, I could see the desktop icons and the Start button. I looked around on the internet for possible reasons that this was happening. One of the solutions was to change the lcd inverter, so I changed it. Once I turned on the laptop with the lcd inverter new, the laptop shows everything well, but after that I turned it works, the screen went black again. I even searched the internet and found another solutuon and who should change the backlight. For me, it made sense to change it because here comes the light, so I changed that too, but unfortunately this does not work either. I didn't know what I should do after that point so I called HP to see if I can give them to fix, but they do have the parts more for my laptop.

  Now I'm on request here if someone has this similar problem and if they got the resolute. If you guys can help me out, it would be useful.

  Hey @thundervolt,

  The only other option would be to try to replace the screen.

  I can't encourage you to replace the motherboard if this does not work because the replacement it requires you to install a new service ID in the BIOS that cannot be done without the exclusive HP software... technically speaking. I have heard and read about some users who were able to do with third-party software, but I would advise against that and the cost of the replacement of the motherboard could be better invested in a new laptop.

  Looks like we're at an impasse.