My screen turns dark gray intermittently.

Similar Questions

• Satellite A105-S361: screen becomes dark gray with gray fine lines

  I have a new laptop Satellite A105-S361 and seem to have display problems. My screen turns dark gray (with fine gray lines) while I use my laptop. This normally happens after using my laptop for 5 minutes or up to 30 minutes. When I restart my computer, I get the Toshiba start screen, and then it works very well for another five minutes before aging again.
  I tried to connect to an external monitor and it works fine.

  I also installed a new BIOS, but I still have the same problem.

  Any suggestions?

  Hi, Ahmed.

  It sounds like a problem with your inverter FL. This is the device that provides lighting for your LCD screen. The fact that you can use an external monitor shows that there is not a problem with your graphics card.

  Fortunateky the FL inverter is not an expensive component and is quite easy to change then I suggest that you only contact your closest partner of Serviec allowed to check your laptop.

  Kind regards

• While laptop booting, goes to a black or dark gray screen instead of on the Office

  When I turn on my laptop it sometimes goes to a black screen or gray dark instead of my desktop, how can I stop this from happening?

  * original title - dark gray screen when turned on laptop *.

  Hi OfeliaJohnson

   

  1 during how long have you had this problem?
  2. did you of recent changes on the computer?

  
  Method 1 :
  You can check if you are able to start properly in safe mode. In safe mode; you have access to only the drivers and base files. Check out the link to start the computer in safe mode and then check-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  
  Method 2:

  You can check if you can use the last known good configuration. It's a Windows startup option that uses the most recent system settings that worked correctly. Whenever you turn your computer off and Windows shuts properly, important system settings are saved in the registry. Then it starts Windows with the last configuration of registry and the pilot who has worked successfully.

  Please refer to the below links to get help on the issue.
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  
  Method 3:

  If the problem persists you can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps.

• Gray screen turns when I load my Satellite L300.

  Hello

  For some time I am facing a problem with my toshiba satellite L300.
  Indeed, * when I charge my phone while I'm working, after 5 minutes maximum, the screen turns grey which prevent me from working while the laptop is in charge. However, in safe mode, I do not encounter this problem.*

  Please, someoene might help to find a solution to this problem?

  Sincerely,

  > the screen turns grey which prevent me from working while the laptop is charging
  It is not easy to understand what may be the problem but the same happens if you use your L300 with battery power?

• I had the virus 'file system' I ran most of MS who removed it... then the screen turned gray and all the icons and files have disappeared... I can't use restore even in safe mode

  I had the virus 'file system' and ran the Microsoft Essentials who kidnapped... Then the screen turned grat and all my tyop desktop icons disappeared and my files... I tried to use the restore but it wouldn't return back or in SafeMode... also, I get a notice that the Task Manager is disabled? How can I turn back?

  Hi David McGeady.

  ·         You are able to open in safe mode Task Manager?

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: It seems that the virus is still there. Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 3: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• Screen turns black and shuts off when wakes up Portege Z830 - 11M

  Hi all

  Anyone know what could be the reason for the screen goes black and turns off when the laptop wakes up?
  The laptop is Toshiba Portege Z830 - 11 M W7HP, purchased in September.

  The problem started shortly after I bought the laptop, but gradually began with a period of 1-2 seconds black screen whenever I tried to wake the portable computer of fashion 'sleep'. He didn't look like a regular part "blackout" of the wake-up process so I just tried to ignore it, but it started to happen more often recently. It got really worse after two months of use and the black screen two or three times until I'm at the login screen. The error was also difficult to re-create because it was random. Sometimes, the screen went black once sometimes twice or just blinked for a fraction of a second.

  Yesterday, I worked during the day and at night it turned really bad. The screen went black several times, whenever I went back to work after a short break.
  I changed the laptop off when I'm done, but when I turned back on it in the morning, the screen was just black. I tried to use the touchpad, but it is only the screen on the gray.

  Can anyone suggest what to do?

  So finally that cannot start the laptop is Hmm normal?
  It would be interesting to know if this help:
  -Battery adapter and ac removal
  -Press and hold power button do this for 30 sec
  -Then reconnect both sides.
  Turn on the laptop?

  If this is not good enough, you're in trouble I guess its hardware related issue and in this case you must service help

• Satellite A200 - screen turns off without reason

  I have a Satellite A200-E530D on Windows Vista Home Premium. For a month, I had something strange happening on my computer, shortly after the start, the screen turns off. without good reason! the only option I have is hard to system boot and everythings... Although a few times after the restart he still went.

  I tried to upgrade to the last poster of drivers (I have an Nvidia Geforce Graphics card 7300 Go with 128 MB of VRAM)

  Another weird thing, Vista SP1 does not install on my machine. tried to uninstall my Anti virus, but that did not help either one.

  Can anyone shed light on my dark screen?

  Hello!

  You have the same problem on an external monitor?
  I m not sure if it s a display problem, mother or software card

  Do you have what display driver installed? You have downloaded the driver from the Web from Toshiba site?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• computer screen goes dark after few minutes

  original title: computer screen

  my screen goes dark after a few mimutes do I do

  Further information on what you mean exactly

  Make sure your computer is going to sleep

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Turn off a computer: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

• U2715H - Windows automatically resized when the screen turns off then turn it back on

  • Windows 8.1 Pro
  • 1 single monitor connected to the PC
  • native resolution 2650 x 1440 at 60 Hz the value
  • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
  • all drivers updated on 28/12/15

  I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

  I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

  I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

  Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

  TIA

  There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

  A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

  The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

  Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

  I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

  www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One

• BlackBerry 8330 Smartphone screen is dark & blink red (4blinks)

  My 8330 screen is dark and I'm lit or flashing red signal.  I tried pulling the battery to reset and does not help.  Can anyone offer any suggestions?

  Thank you

  JRW8

  If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• Lightroom Develop module turns dark, grey and non-exposed images

  Why when Lightroom loads images (to develop the module), all images in the grey and dark towers (the preview looks perfect - planned exhibition and full color). All settings are set to 0, no automatic agreement or presets are applied.

  Also, when I take pictures (Nikon D4), they looks good on the screen of my back and I'd guess D4 knows how to calculate exposure. But in Lightroom, they all come out at least 1 full stop not exposed, so after exposure setting, I had unnecessary noise grain (and work).

  I even tried to download Nikon View NX (software for Nikon transfers) initially thought, because I was hoping that after importing the files to Lightrooms I will also get color camera settings (such as landscape, Portrait, Vivid, etc.).

  What could something couse him like that?

  P.S. It's screanshoot - Lightroom loads/process images that they all be so dark as the selected image. All the neighbors sunflowers are the same, and they was that I expected to be... Previously, they turn dark...

  

  http://forums.Adobe.com/thread/358016

• Dark gray background to and image/pattern

  I use Illustrator cs6. I would like to change the dark gray background that surrounds the jury of art at a step and repeat the reasons for our logo. We use screenshots as a means of producing evidence low resolution. Seen our step and repeat model logo as background would include easily in our trials of low screen resolution. Can I replace the file 'system' for the gray dark in our approach and knit?

  You cannot change the pateboard for a model logo using preferences Illustrataor, but you can make a layer below everything and put your model logo in there. In layer options, you can disable print and lock the layer if you want.

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• My iMac screen have a gray veil. What is happen?

  My iMac screen have a gray veil. What is happen?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it's the same in a new account and Safe Mode, if you live near an Apple Store, take a go-Genius Bar to have the test computer. Apparently there is no testing fees. Use the 2nd link if not near an Apple Store or are not in the United States.       Repair - the security of confidential data

  Genius Bar réservation WE

  Authorized service provider

• Changing color to a dark gray background by default, do not see the buttons in gmail.

  White pages shiny most of web sites hurt my eyes and I really enjoy making pages a gray color.
  After you change the preferences/content/color/background to a dark gray, I really like how everything seems particularly search pages, google calendar, gmail, etc..

  The problem is that many buttons have disappeared. These buttons are icons that I believe so I don't understand why the color of background them would disappear.

  inspection of a gmail button that is now just an outline with no text or icon as follows:

  so I think that the problem lies in the fact that many icons and graphics using transparency and which maybe why they can't return when I force a background dark using FireFox preferences for color.

  I found a good solution = Color Transfrom of Peter Sloetjes, UPDATE "colorific" it's even better and, from the same developer.

  This extension is somehow able to give me the color controls AND rendered graphic correctly!

  See you soon!