My SONY CD-RW/DVD CRX835E [CD-ROM drive] is not available in 'my computer' and I can not open another cd or dvd.
When I try to run a cd my CD-ROM does not appear in 'my computer '. In addition, the cd does not automatically start as he did once. Any help would be appreciated. Thank you
Jim
With pc off, & power off, disconnect the cdrom, plug it into another IDE connection, make sure that
you set the jumper pins plastic on the unit correctly (master or slave), also reset pins on
another unit if 2 share the cable once through, restart the pc, xp will reinstall it.
Tags: Windows
Similar Questions
-
My dvd/cd rom drive does not open
I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.
Hello
Try using a tip of a paper clip to open the tray.
"How to create a trombone in car opener.
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
"CD-ROM, DVD or other drawer not open."
http://www.computerhope.com/issues/ch000214.htm
See you soon.
-
Separated from this thread.
How can I open a disc in my drive, but does not open on my screen?
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://Club.myce.com/F61/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
CD-ROM drive does not open by cmd, trombone, "right click" eject and eject button
as the title suggests, I have tried everything and can't get my HDD to open. all ideas are useful.
Hello
Sounds like it could be a stuck in drive, there are problems of power or lead, or
It just can be used.If they don't help then check with the system manufacturer and/or drive
Manufacturer support, their documentation online and drivers and ask in their forums
(as appropriate) about the known issues.The drive is just stuck?
For the readers of the status bar:
Sometimes they get stuck. There is a small hole in the front of the CD drive which
You can stick a paper clip in which will free the reader and allow it to open.Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htmOpen a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_ejectBe careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.htmlThe method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrkHow to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330Also have heard double tape on a credit card or play can work.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
DVD Rom drive does not open when I try to eject a disc
Original title: dvd rom
HI.i can open rom.i push to eject dvd but dvd rom not the open.can help me.
Hello
1 is this blink when you press the button to eject the CD/DVD drive?
2. is there the CD/DVD in the CD/DVD drive?
3 did you changes to the computer before the show?
4. don't be the CD/DVD drive not detected in the Explorer(My computer) Windows?
If the led does not illuminate, the reader is disconnected or broken. In this case, you may need to contact the manufacturer of the mounting of the CD/DVD drive system.
If the led does not blink, you can try the following:
(a) open my computer
(b) right click on the CD/DVD drive
(c) click on Eject and check if the CD/DVD drive eject
-
I tried all the solutions given by the computer itself nothing doesn't. It seems that it will open up and then stops. I have the green light as I usually do, but it flashes not stable. I really need to use this player. There is nothing in the drive to get stuck. Is that someone out there has had this problem and how they solve this problem?
First of all, try to open Windows Explorer, click right on the optical drive icon and select eject.
Another option is to hold the eject button in (gently) in electric biking your system. Take your finger on the button the moment where he begins to open. In addition, you are allowed to try and hold the drawer open if she tries to close the bottle. There are generally micro-switches that detect it and put an end to the attempt to close the plateau or the door.
You can also get the emergency eject hole somewere around the door (sometimes under a bezel). It should work with the power on or off, but I do it with the power turned off. (Paste a conductor in a piece of electronic equipment of power on seems a recipe for disaster to me.) The hole is the diameter of a large paper clip (the favorite :) tool. Succession the wire out and push to the right . There should be some slight as resistance it UN-engages the latch and starts sliding drawer open. At this point, you should be able to get out the drawer/tray by hand.
-
P50-A-144 satellite: the CD-ROM/DVD-ROM drive does not
Version of Windows 10 Home 1607 (Build 14393.187)
Hello
After Windows Update Version 1511 1607, the CD-ROM/DVD-ROM drive does not work.
The D: drive does not appear in Windows Explorer,
CD-Audios and videos / DVDs do not work.In the Device Manager, the following legacy status error message appear:
"Windows cannot start this hardware device because its configuration information.
(in the registry) is incomplete or damaged. (Code 19). »Could you tell me how to solve this problem?
Thank you.The solution was to uninstall the program "Toshiba Recovery Media Creator' and system settings/Programm features.
I still don't understand why, but the fact is that after uninstalling the CD-ROM/DVD-ROM start normal work.More information here:
http://www.borncity.com/blog/2007/08...-verschwunden/ -
CD/DVD-Rom drive does not not on Equium A100
I installed a webcam, and it made my DVD - rom drive does not not with all drives. I uninstalled everything to do with the webcam and it still does not work. Can someone help me solve this problem without using the recovery disk of the product came with my laptop?
I had this problem before, but I didn't the first time, it's the webcam that has caused the problem. It s webcam trust wb - 1400T. I had to use the product recovery disc and he had a lot of hassle to install all my programs again and this time I'm in the middle of exams and can't get it all done in time for my exams, as I have vital work on here I have to do.
.. .Please help me... I think it is the driver, but I don't know how to fix it.
Hi mate
> I installed a webcam, and it made my DVD - rom drive does not not with all drives
To be honest I have never seen that the webcam may have a negative influence on the internal CD/DVD drive.
I see really no connection between the webcam and ODD... very strange
Do you get any error messages?Anyway, in my opinion, you should try these solution ideas;
(1) remove the drive from the Device Manager CD/DVD and restart the laptop. After restarting again the operating system should recognize the STRANGE and should re-install the drivers.
2) access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
.. then restart the laptop.(3) download and install the tool freeware "CCleaner". This tool repairs registry and solves several problems in System.
If this does not work, then the new installation of the OS would be wise to check if the problem could be related to a software problem.
Best regards
-
CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?
Try following the steps under "Windows XP" in the article following the MS KB:
http://support.Microsoft.com/kb/982116
These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.
Create a System Restore Point beforehand and restart the computer later.
-
Satellite L500-126-CD/DVD drive does not open very well unrolled
Hello
I just got my second Satellite L500-126.
I traded my first for a new because the ESCAPE key got stuck sometimes and made a grinding sound.Now, with my new one, I noticed that my dvd drive does not open very well unrolled and 2 bars of silver metal bit come out with the car when I open it.
Is this normal?Also, when I close the dvd player, I hear a little noise "ping!"
Like a spring, or something. Is that also normal?Thanks in advance.
Hello
I'm not quite sure what you mean by 2 small bars of silver, but the reader of my laptop s contains two metals (runners, railway).
This is normal and these pieces are important to ensure that the drive can eject properly and could remain in a good position.
Still, you will hear a short click Open and close the drive.So I guess it's ok.
-
CD/DVD drive will not open a picture disc
My CD/DVD drive will not open a photo record, any ideas? It used to work and now will not, it is not an old computer
Hello
Here's what you can try to solve the problem: http://support.microsoft.com/kb/330135
-
DVD drive does not open.
DVD drive does not open. Won't open with the emergency eject button. Once opened, it will close with the eject / close button. How can I fix it? This can cause the drive open suddenly do not?
Thanks for any help you can provide.
Hello
· What is the number and the model of the computer?
· Do you remember all the recent changes on the computer before the show?
It seems to be the problem with the computer's hardware. You can check with the manufacturer for assistance on the same.
-
DVD drive does not open. What can I do?
Yesterday, the DVD drive in my Dell laptop, Inspiron, Windows Vista has worked very well. This morning, the drive does not open when I pressed the eject button, although the indicator flashed several times. Dell support site mentions try "eject feature in Windows", but I can't find information about this.
It is important to get the DVD drive works because I'm ready to upgrade to Windows 7.
How can I fix the drive?
GordonP
http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html
http://www.fonerbooks.com/laptop12.htm
But first of all, you can go in my computer, find your dvd drive, right-click on it and click on eject.
If this post answers your question, click mark as answer .
-
I just had my Dell Inspiron 1318 in the shop for service, and when she came back I had to reinstall a lot of my old software.
The Sony Optiarc DVD +-RW AD - 7640A DVD - ROM drive in my computer didn't have to be replaced at the shop and worked well for the first hours of operation of the system. I had reinstalled Office ' 03 and Roxio DVD burning software and it would try to install something else when the drive has stopped working.
I also run updates of the system before you attempt the installation of Office 2003, etcetera.
When I insert a disc in the drive, it produces noises as if she is trying to run or to read the CD before ejecting again.
I am running Windows Vista Home Premium with Service Pack 2, almost completely updated.
I tried a system restore to the last point of operation disc drive, and then I tried to update my drivers. When he said that I had the more recent/better driver, I uninstalled the device and rebooted. Finally, I tried the Mr. Fix - it on the Microsoft Web site. Nothing has worked.
Anyone happen to know what is the problem? I need to have this drive works in short order and I really do not have to return the system to the shop for repairs more literally the day after getting it.
Hello
The Roxio probably malfunctioning filters and if so the 1st steps here that will correct.
If they do not solve the problem, then work your way through the rest as needed.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Satellite P20 DVD ROM drive may not be recognized
Hello
I just replaced my DVD ROM drive, but I had a problem.
It is a new DVD rom drive I ordered at TOSHIBA also.
It could not be detected by Windows:
-Tried to check on Device Manager, not detected
-Tried to reload the driver, the same problem
Note:
Whenever I tried to re - insert the disc, the blue light in the control panel of my P20 beds (I understand, which means that the P20 detects the drive) but I don't understand, is that why Windows XP does not detect it or it does not alarm or error messages.Any help?
Thank you
Hello
Try to use the Add Hardware option.
This question is very strange, but I read on some sites, sometimes a whole new OS install CD player, brings back to life.
Maybe you are looking for
-
When you click on a link to a web site in Spanish, I get an error message: "No. is pudo insertar IP 2605:e000:3 fc 0: 37:6563:1afb:8 d 61:9783 en datos base.» Is this a problem with the web site or on my computer? Thank youLymsi
-
Satellite R630 - 130 missing Webcam from the device after Win7 Update Manager
Computer laptop only 6 days in use. After that Windows 7 update integrated webcam just disappeared from the Device Manager and, as a result that does not work. System just can not find. New drivers did not help, as well the default BIOS setting. I ev
-
How to install the recovery image on Satellite A200?
Hi all, I would like to do a restore to factory for my Satellite A200I checked their hard drive and confirmed that the recovery partition is still there When I want 0 and turn on the laptop, rather than the beep and the warning screen, need me only t
-
Can I also use RAM from a mac mini in 2012 in an iMac 2010?
Hello I recently updated the RAM in a mac mini 'end 2012' a member of the family of 2 x 4 GB 2 x 8 GB, which means that I now have two spare 4 GB modules. I also got an iMac 27 "older, (mid-2010), which has 4 x 2 GB RAM modules. Can I replace two 2
-
HP envy 15 E3S19UAR turn off touchpad software, when I insert the mouse
Hello I want to disable touchpad when I insert an external mouse. This notebook is not shortcut that Disable Touchpad. I installed the synaptics version: Windows 8/7/XP/Vista-64/32-bit Edition v17.0.19 , this download link: http://www.synaptics.com/e