my sound when turned up I get a squeal noise it was ok until I pluged helmet
My his laptop when I turn it over it makes a screeching healthy it was ok until I pluged headphones in and micro all-in-one
Hello
Follow the steps in this article and see if that fixes the problem.
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
Kind regards
Afzal Taher
Microsoft technical support engineer
Tags: Windows
Similar Questions
-
My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you
It was AC off recently?
-
When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?
Hi royster677,
Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your iPhone. If you are having problems with the tone of the text for a specific user, you can check the parameters of Contact of the user (under the Edit button) as shown in the following page of the User Guide:
If everything looks correct, and you still have questions, you can also check your settings stuck and do not disturb:
Block calls and messages to block or filter on your iPhone, iPad or iPod touch - Apple Support
Use of do not disturb on your iPhone, iPad or iPod touch - Apple Support
Concerning
-
How do I get sound when I receive by e-mail
How do I get sound when I receive mail
Go to control panel | Sounds and put the sound for new mail Notification. Then, in OE, go to tools | Options and check the box that says read a sound message when new arrives.
Steve
-
Original title: windows does not
I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs
What can I do?
Enter your bios usually with keys F2 or delete to the first powered
Use default Optimize can be the F5 key and save and exit,
Insert your installation disc or flash media and press F8 or F12 to boot on it
Then use the recovery tools to run the Startup Repair tool.
http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7
-
I can't get sound when try sykpe
I need help getting sound when I try to Skype
Hello
1 do you find sound while using other applications such as Windows Media Player, etc.?
2. What is the version of Skype you installed?
3. you receive an error message?
4 you did changes to the computer before the show?
Method 1: Select the parameters of mixer for running applications.
See the following steps:
a. launch the Skype video chat.
b. click on the volume icon in the taskbar.
c. click mixer.
d. under Applications, select that is to reactivate the sound for all running applications.
e. check if the problem persists.Method 2: Reload the drivers for sound card has helped many users.
See the following steps:
(a) click Start, right click on computer.
(b) click on properties, click on Device Manager
(c) develop its video and game controllers, right click on the audio adapter option
(d) click on uninstall
(e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.
Reference:
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Post your request here for help on Skype: http://forum.skype.com/index.php?showforum=5
-
When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios
This looks like a utility Acer protect disk hard & possibly also the BIOS. You will need to consult your manual for Acer. You have configured a password of HDD that you are now trying to recover, by chance? This recovery is not possible if the hard drive has been password protected.
If it was a Windows login screen then it would show your user/admin name and password entry area & would be clearly identified as a Windows form of the version of Windows being displayed at the bottom of the screen.
-
Strong static, crackling sound when the TV is turned on
Hello
I have a Sony Bravia KDL-52W4100 and recently it started making a loud noise, sizzling when turned on after being off for 4 or 5 hours. In addition, when set to a HD channel (we use Comcast) there are lines that cover the screen. (When it is set to a standard definition image, we see the image.)
The problem disappears after 4 or 5 minutes.
Any thoughts on the cause of the problem?
Thank you for your message and welcome discussion of the user forums.
From the description of your problem your TV needs repair, so please visit our eSupport for repair options: http://esupport.sony.com/US/perl/service.pl -
How do I turn off the sound when one take a picture in the acer iconia a1 830
I want to mute the sound when I take a photo in the acer iconia a1 830.
This is my first time that i use this tablet, and I do not have this problem. I try to lower the sound level maximum. and I can hear the sound.
This problem is very basic, and I need a solution.
The other problem is the temp my tablet is 42 degrees Celsius (with an application to read the temperature of the battery)
is normal that?
I solved the problem. I downloaded another app to take photos and this app has the mute option the camera.
-
No sound when don't receive the text for a single contact.
My iPhone6 does not play a sound for one of my contacts when a text is received. Others make it sound when the text is received. Any ideas why this happens?
HI there, milford dennisfromnew!
Thank you for using communities Support from Apple. After reviewing your post, I see that when you receive an SMS from a particular person, you don't get notification sounds. I use Messages every day to keep in touch with friends and family, so I know how important it is to make sure you get all your notifications and would be happy to help you!
It is possible that you cut your conversation with this person. The section "Mute conversations" in the following article will give you more details on where to control and how to enable and disable.
Use Messages with your iPhone, iPad or iPod touch
The information is:
Silent conversations
To no longer receive message notifications, you can cut off conversations. In the Messages, go to the conversation you want to turn off notifications for. Then click details and turn on do not disturb. When do not disturb is activated,will appear next to the conversation. This interruption of the notifications only for this conversation to message, not your device. Always you receive all messages and see notifications for them on your lock screen.
You can also cut all your conversations by turning on do not disturb in settings. Go to settings > do not disturb and tap manual or programmed. This will stop all notifications on your device.
Happy texting!
-
No sound when closing a soft plus
When I scan a card upwards and close it, I get that "swish" sound more. I checked the system sounds, they are on and the volume turned completely to the top.
There is actually a bug with the volume control on the narrow map "swoosh" and the camera shutter sound (always available in 1.0.3). Here's how to work around:
-In sounds and ringtones, the volume of system sounds to you want the swoosh to reach (more trying to boot). You will not hear a volume change sound swoosh/camera.
-Soft Reset your Pre (R-Sym-Orange)
-After restart, your shutter, swoosh and camera will be the volume that you set. Now define the Volume of sounds of your system on what you want it to be for all the other sounds of the system (alarms, SMS notification, etc.). Volume of shutter Swoosh and the camera will not be affected by changes in the Volume of system sounds (unless you new soft reset!) If you do, the swoosh/camera shutter sound will be on what is on Volume system sounds when you reset - reboot).
While I like the swoosh and set it to max so I can hear it, the unfortunate side effect of this is the shutter of the camera sound is deafening. It would be nice if in the next version that Palm makes these two independent sounds AND actually allows you to define them without having to reboot the Pre.
JT
-
No sounds when in standby mode
My phone makes no sound when I get a text or a phone call in Stand by. I checked the volume and makes the sound work. I get the sound assigned to a text or a phone call if my display is on, but once I have turn off, standby, I get nothing. I did a soft re-boot. Nothing. Help, please.
Check the settings > do not disturb. Make sure it's off.
-
Treo 800w - no sound when recording video
When I record a video with my treo 800w, is not capture all the sounds. Am I missing something? I can't find a setting to fix this problem, if it exists. This phone record sound when shooting video? If so, anyone know how to get there?
I had going. I feel a bit stupid, but just in case someone did the same thing as me... If you have the volume button disabled on the top of the phone does not have his back. Imagine that. I have the sound away at my job and usually leave it off. I always thought of him as a ringer switch not a complete audio switch. My bad. It turns out all my clips that capture sound. Sorry for wasting your time to Arnaud. I appreciate the help.
-
There is no sound when I try to play the songs of desktop PCs.
There is no sound when I try to play the songs in my library or radio. The speakers are very well because I can play from iTunes radio on the internet and local music. I've deleted and reinstalled iTunes, restarted my computer and I know that the sound is turned on. Curiously, it seems that the song moving forward and does not in fact (the blue line streaming lights up blue when I select a song or an advance to the next song.
See the replies in this thread:
-
How to disable direct sound when you use a plugin for guitar?
I use the Waves GTR plugin for recording guitar in Logic Pro X, but because it puts a lot of pressure on the CPU, I tried he governs through a "bus" instead of having the plugin separately on every guitar track. The difference is that when I use the bus option, I can't seem to get rid of dry direct sound which is obviously very embarrassing. The only way for me to get rid of the direct sound is to use the RTM plugin on every guitar track that quickly causes the overload program when using several of these titles.
Anyone know how to get rid of the direct sound when you use the alternative of bus for the guitar tracks?
just at the exit of the guitar channel strip no output. This way you won't hear at the follow (because the dry track will not be transmitted to any output)
Maybe you are looking for
-
Apple Mail starts whenever I receive a new Message
I own a MacBook Pro and have all updated as much as iOS and go my apps. Since the last update a week or two ago, Apple Mail opens by itself whenever I get a new email! This is very frustrating, because I quit Mail and then some time later a new email
-
What is the exact total weight for iMac 27inc 5 k retina 2015, including the box
-
activation key is blocked, setup.dll signature does not validate
e:XX86\pRO PUSR. WW/O SETUP. DLL DIGITAL SIGNATURE DOES NOT VALIDATE OR IS NOT PRESENT
-
Does anyone know what indicates this bucket of fault?
-
ST500LM000/ST1000LM014-Seagate Firmware Update will not install. He goes to the start-up and crashes. Any suggestions? I use Windows 10.