No sounds when in standby mode

Similar Questions

• The printer is restarted when in standby mode

  1 HP LaserJet CM1415fn

  2 OSX and Win7 64 bit

  3. no error message

  4. no change

  2-15 minutes the printer reboots and initializes it.

  The definition of the printer off sleep or 2 h is not help. Always the printer reboots and initializes efter (screen-hum and white), 2-15 minutes.

  Workaround is to have the printer in stop mode. I would really like the printer at the booth of fashion!

  The problem is that the collaps HP firmware of a network chatty if WS-discovery is enabled. For example. If you have a Boxee Box in your HP printer network will crash because of all the transmitted network packages.
  The solution until HP corrects this error is to disable the feature in the Control Panel on the printer HP:
  1. go to the web site of your printer.
  2. choose "Network" and "Advanced".
  3. uncheck the "WS-discovery.
  4. apply/save
  5 made! Now the printer will work as it should.

  I hope that HP will fix their firmware as soon as possible.

  

• Satellite Pro M40: Standby Mode active when you press the sign @.

  When I'm connected to the internet and I press the sign, a message pops up saying: 'do you want to switch to standby mode ' @?

  Anyone know what I can do to stop this message coming?
  As it prevents me using the sign @!

  Thank you!!

  It's very strange
  You use the right keyboard language settings?

  Do you use the preinstalled OS original Toshiba?
  Please check to see if the same problem happens using laptop computer with factory settings!

• Satellite 1800-314: when I close the lid it won't go in standby mode

  I hope someone can help.
  I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

  Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
  I'm tired now.
  Is there a simple solution that I'm missing?

  Grateful in advance for any help!

  Hello

  You know it's very important to install drivers in the correct order.
  The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
  If the energy saver has been installed on the operating system windows power settings will not work.
  Toshiba crash parameters the parameters of Microsoft.

  In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
  But be careful. You must use the good BIOS and the right procedure upgrades.

• X 360 m6-ar004dx ENVY: ENVY x 360 past mode standby mode when it is turned 90 degrees

  Hello!  I bought a x 360 want m6-ar004dx recently and so far it has been a decent laptop.  One thing that has been a nuisance, it is that when I put my laptop on the side (rotated 90 °, open lid and not in tablet mode), the laptop into sleep mode after X number of minutes.  Sometimes, the laptop is do not go to standby mode when he's on his side, however, between "standby mode" when I recover my laptop from the above heading.  It seems that the accelerometer is triggering mode 'sleep' when he turned in both directions.  I checked all my Power Options and ensured that the computer will not mode enter "standby" when it is plugged.  Are there settings I can change to fix this?

  Thanks in advance!

  @aviation76

  I looked around and after a long search, I found that this could be a simple and, possibly, a funny solution (you'll know what I mean once you're done, read this).
  
  Obviously, your model is based on the power button on the left side and when you flip 90 degrees and lay your computer on this subject is on the left, the power button is pressed and which puts your computer to sleep according to Settings - ' choose what buttons power "
  
  Please check the settings above on power options and change to - 'NOTHING to DO' for this problem.
  
  Keep me posted, though!
  
  Kind regards

• Why no sound when running in safe mode?

  When running safe mode there is no sound with any video on...

  Most of the drivers / services does not work in safe mode. His Inc.

• Computer stops when it is in Standby Mode

  Computer HP worked many years, now all of a sudden, when I put it in Standby Mode after a few minutes, she completely stops! When I hit the power button / I get tha warning Page indicates that the computer does not correctly turn off, and then it starts OK. I searched the forum and not seen someone with this problem. I am running Vista Ultimate SP2, 32-bit.

  Hi Kris,

  Using registry scanners is not recommended. Windows has aSFC Scan tool built in which scan repair/replace the missing or files corrupted. What are your settings under sleep (Start > Control Panel > change when the computer sleeps >change advanced power settings > Expand sleep)?

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• Audio stops playing in the iOS when it enters mode standby (unlike music players, Radio Apps etc.).

  Hello!

  I need my application to continue the audio in the background (for iOS) when it is in standby mode (just as do Radio Apps and music player apps).

  So far, I made these:

  1 - render is set to CPU (not direct / or GPU).

  2 - I got this code in my application's main class:

  AS3 package

  {

  import flash.desktop.NativeApplication;

  ...

  SerializableAttribute public class Main extends MovieClip

  {

  public void Main()

  {

  NativeApplication.nativeApplication.executeInBackground = true;

  ...

  }

  }

  }

  3. in the XML file, I have included:

  ...

  < iPhone >

  < InfoAdditions >

  <! [CDATA]

  < key > UIBackgroundModes < / key >

  < table >

  Audio < string > < / string >

  < / array >

  < key > UIDeviceFamily < / key >

  < table >

  < string > 1 < / string >

  < string > 2 < / string >

  < / array >

  []] >

  < / InfoAdditions >

  < / iPhone >

  ...

  What were the results? Now, when I press the "HOME" button, the application is reduced to a minimum and it MAINTAINS PLAYBACK AUDIO. Geat!

  BUT still when I press the POWER button (means in standby mode) Audio playback stops (unlike what I want). What can I do to fix this?

  I'm really grateful for your help in this matter.

  Technical details))

  Adobe Flash Pro cs6

  Air 3.9.0.1210 for ios

  tests on Ipad 2/IPhone 5 (iOS 7)

  Hi Pouradam,

  No, this will not work for your needs, unfortunately.  There may be a clear indicator of app which should be defined, perhaps...  I do not know.

• End of 2015 iMac 27 inches 5K screen lights up when the "sleep mode"

  When the iMac is in "standby", sometimes the display lights for a while and then turns back off the coast. Screen does not completely, simply turn the backlight (it's like when you see a black image with the high brightness level).

  I know the iMac turns once in while when the "sleep mode" to access the internet and such things, but I don't like the screen turn on like that.

  Is there a question?

  Thank you for your collaboration.

  Probably not a problem, but to be sure that you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Portege 7140CT Shutting Down in Standby Mode - cannot close normally

  Hello. I bought a laptop Portege of CT 7140 for my son. It is a very good unit but has a "Shutdown" problem - only it used to closing, that is. It seems to power off, but the 2nd of the LHS on the front of the device flashes slowly. The user's guide explains what happens when the device goes into "Standby" mode I tried all the options of FN + F3 (off, standby and Hibernate) with no difference. I disabled the feature key installation in the Panel. I disabled the "Hibernate" mode in the control panel. All to nothing does not. Someone at - it an idea why this is happening and how can I solve? Thanks a lot for your help. Mike

  Hello

  I never heard of this problem, but maybe to reinstall the system can solve it.
  Or perhaps reinstall or update the BIOS will help you.
  I'm sorry that I don't have a better idea.

  Good bye

• Model # 860-180 st: computer will not go to standby mode

  I just got this computer HP, model # 860-180 st, not even a month, "sleep" mode was working fine when I got it, but now it will not enter sleep mode. I checked everything in Control Panel, power options, so I don't know what the problem is. People of the idea?

  Jay_101 wrote:
  

  Greetings,

  Also check out tips found on thissite. She aims to win 8.1 but will also help to win 10.

  First generate a report of power. This will tell you which prevents the day before.

  See you soon!

  Hello Jay_101,

  Thanks for the link, I found what was preventing the computer in standby mode. It was the srvnet thing.  This link has all the tips and trick to solve this problem.

  I owe you a lunch.

  I contacted the HP Support by phone, the call is routed to the India, where else? The guy wanted remote access to my computer, I said no way Jose. These types of support for HP in India are unnecessary. All he wanted was Remoting to my computer, since I refused he won't talk to me more.

• L50 - A - 160:USB of power in standby mode satellite is disabled but it STILL works

  Hi all!

  It's my L50-A-160.

  USB power standby is disabled in the BIOS but it always on!
  Nothing helps.
  As I can not turn off wakes on keyboard events. BIOS 1.30.

  Thanks for the advice in advance.

  Hello

  You are talking about sleep function & expenses supported by some USB ports?

  Be aware that not all media ports USB Sleep & Charge and only marked with a small sign flash USB ports would give such function.
  As far as I know on Satellite L50-A-160 only USB 3.0 (on the right side) would support this sleep & Charge USB.

  The charge & sleep can be enabled and disabled in windows.
  Go to desktop-> Office Assistance (in the task bar)-> utility tools & -> Control Panel

  There you should find the different tabs and one of the tabs should have sleep & fresh / tab sleep & music which allows you to set advanced features for the mod, Hibernate standby mode and stop mode.
  Simply move the slider to activate or deactivate the function sleep & Charge.

  But the sleep & fees may not work with certain external devices even if they are compatible with the USB specification. In this case, turn off the power of the computer on the charging device.

  You should also be known that when sleep & cool man of wake-up function is activated USB does not work for the compatible ports.

  In addition, there is an option called function in battery Mode. This option can be used to toggle the sleep & Charge in battery mode. It also displays the remaining capacity of the battery.
  Simply move the cursor to enable or disable this feature.

  By the way: read the user 95 manual page. It would be useful for you.

• Satellite Pro L10 does not go on standby mode

  After a virus and reinstall all my programs and drivers etc, my computer won't now, go in standby mode.
  When you go to "turn off computer" option ensures their but is grayed out and you can not click on it.
  Power options in my Control Panel on them is not an option to set the day before to the top.

  Can anyone help?

  Hello

  In my view, a Toshiba Power Saver must be preinstalled and there you should be able to enable or disable the standby or hibernation mode.

  Check it!

• Photosmart 7520: Photosmart 7520 loses network connection once he spends in standby mode.

  Printer is not in the network once he spends in standby mode. Only works after I have unplug and plug printer back in.

  Hi @tilliegirl

  I understand that you're having trouble with your Photosmart 7520. When the printer goes into sleep mode it loses the connection to the network.

  This document contains information on the possible causes of an interruption of the connection wireless, tips to avoid the question, tips to maintain a connection and troubleshooting to help you re-establish the connection Wireless on your printer; The printer keeps Wi-Fi connection.

  In addition to the solutions proposed in the document and you've probably already tried, please make sure that the printer is connected directly to a wall outlet, not a surge protector / power bar. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see,

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector