My start missing Menu

Similar Questions

• My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  This problem is solved replaced smps problem is resolved. Maybe the smps is not given the correct voltage

• The menu icons and desktop start missing after the start of the desktop computer

  Original title: I do not see my bar of tasks or deskop

  When I start windows xp, I don't see the start menu or the desktop icons, only the desktop wallpaper. I was able to access the internet Explorer via windows Task Manager...

  Help me please! :))

  Hi Daannii,

  1. don't you make changes before the show?

  Try the following steps to start a process of the Windows Explorer and check the result.
  a. start your computer and boot to the desktop.
  b. press CTRL + ALT + DELETE, and then click Manager tasks.
  c. click on the file menu, click New task (run...).
  d. type % windir%\explorer.exe, and then click ok.
  e. restart the computer and check if the problem persists.

  For additional troubleshooting steps, see the following article: http://support.microsoft.com/kb/318027

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing menu on HP 4600dn IO

  Nice day

  I use Windows 7 with a 7300NX Billion Bipac router which is connected to the HP 4600dn.  I can't ping the printer and the reason is that one of my items in the printer menu has disappeared.  You should have three menu under i/o options:

  IO timeout

  Parallel entry

  EIO X

  Last X EIO is missing and I can't get an IP address.

  Previously I connect via a switch, but then the power switch has become defective so I connect directly to the printer, not knowing that I then have to use a crossover cable.  When you try to connect the billion router I don't have an IP address.

  Downloaded the HP Print and Scan doctor but still can't find the printer.

  Any help will be much appreciated

  Best regards

  André

  First thing you need to do is run a configuration page in the information on the printer menu. Do you get a second page with network information. If this is not the case, the printer network card went bad. If this is the case, you can sometimes repair it as more came with the 610N or 615N. To repair and it's no joke, you must remove the card with the power turned off and then remove the piece of plastic you'll need a driver torx10. Once the plastic piece is delete, prop the card upward in a baking pan with the chips to the top and the bottom of the map not touch the pan. Preheat a good oven at 350F (177C) and when the oven is ready, place the pan with the card in the oven for 8 minutes. Remove and let cool for 15 minutes. Again set back with power off space in housing EIO printer, connect the cable and lights up and you should now get the second page. If you get a second page then there may be a separate menu for the eio card item. Even if you do not find the menu that you can do is a cold reset the printer connected with a rj45 cable regular to the router. Turn on the printer while pressing the box until all 3 lights on solid. If they're not continuous, then turn on the printer and when the memory starts counting press and hold button until light green check mark all 3 are ongoing. Liberation and scroll down the menu to cold reset and press the check button. When the printer is ready, wait 2 minutes and then print the configuration again information page. The second page should now have an ip address that you can use or you can type this address into your web browser and make changes to what you want. Keep in mind in both cases, you should have a green link light on where the rj 45 cable connects to the card. If no link light, then you may have a problem with the cable or worse taking on the NIC itself may be faulty. Just for your information the Cook works because many of these developed cards cold solder on the central processor and cooking redéroule the weld to run again.

• In win 7, missing menu firefox, toolbars; Unable to access the reset

  Using Win 7 64 bit. All of a sudden everything disappeared from firefox except the URL line. When I ran a checkdisk, there was corruption in a bunch of files. May have caused the problem. Went to try the mozilla support reset suggestion. Can't do it because I have no Firefox icon in the upper left to click and so cannot enter in Help menu or anything, except what I can access it through the line of the URL. Cannot find any other advice on what to do. Is Firefox uninstalling and restarting the only answer? Do I lose bookmarks, add ons, etc.? Thank you.

  Hello jgdolan, please try to close all firefox windows and then by holding down the SHIFT key while you start again - this will bring up the mode without failure of firefox with the ability to reset the browser.

  The problems of Firefox in Mode safe

• SA40-702. Does not start, missing file...

  Hello
  I have a series SA40-702 Satellite. I had the laptop for about 18 months and until recently had no problems with it.
  While on the Internet one day, the laptop has decided to lock up & then close on me, I'm sure that, it displays a message on the execution of a physical memory dump, anyway it closes I started in safemode, performed an analysis of drive & off frag & all appeared to be well again for about a week. He then decided to do it again, but this time he wont even go into safe mode. It displays a message - Impossible start because the following file is missing or corrupt " \Windows\System\vgaoem.fon ."
  I really don't want to have to do a full recovery on this because I have a lot of important information about the hard drive I need.

  Can someone tell me if its possible to load this file back to laptop...?

  Thanks in advance, & apologies if it's a bit lengthy...

  Gazza...

  Hello

  This file which you will find under C:\i386. Try to copy this file to the right place (C:\windows\system).

  Good bye

• The missing menu bar icons

  I had to do a reload of Yosemite and found now that my menu bar on tight now lack the icons that I've had it. I still have the time and the wifi icon but none of the others. How can I fix this?

  With the help of an iMac.

  Hughie

  What Miss do you? For many items, ranging in the preferences system for the specific item and check XXX view in the menu bar should solve the problem. For example if you go to System Preferences/Time Machine, the option is at the bottom of the window.

• Don't want Phoenix I7: Start 10 menu appears not

  I recently tried to install Corel X 3 using XP compatibility mode, but it did not work and damaged my menu of the Start button. Everything seems to be OK, but clicking on the Windows icon results in a brief "Hourglass" and no activity. I tried a system restore, but it tells me it couldn't find a file (AV was off), so I can only assume that X 3 deleted something. I tried some of the suggestions catering menu to start with powershell etc but none have brought.

  I don't want to re - load Windows, if I can avoid it, but it seems to be running out of options. Any suggestions please?

  Thank you!

  Currents

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your Win10 Start Menu problem and wanted to help.

  What COULD something work is known as a repair installation.  It is less destructive of all functions of Windows recovery and rewrites the files from Windows system, including drivers, leaving your apps, settings and data intact.
  
  To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Satellite Pro A60 does not start: missing or damaged config.sys

  Hello

  I turned off my computer Friday, I went back to his Monday - and it won't start. I thought that the config.sys file is missing or damaged.

  I tried all the usual methods - safe mode, last known good setting, OS etc, but none of it works. The computer does not recognize that the recovery CD is in the drive, either.

  As I don't have an original installation CD - the computer was shipped with the software already installed - I can't try either.

  I want especially to recover the entire system, but if I have to, I can live with that. Any suggestions would be welcome.

  Thank you very much.

  RONMAC

  Have you tried to boot your PC and press C after POST message? Recovery CD to be inserted.
  This C command forces the laptop to boot from ODD first.

  Maybe it works for you.

• HP pavilion followed bsod to black screen and the start program menu f10 does not work

  Hello

  Come play a game on my pc when a BSOD pops up... then in a few seconds my pc stops and starts again. But now I'm stuck in a black screen: a disk error occurred press ctrl alt del to restart. When I do, I'm back to the blue screen (the screen where you can choose to go to recovery, configuration and startup menu). The f10 key recovery does not, others do it... What can I do? Im not happy to lose all my documents but if not the end of the world because I have an external drive with the most important things about it. I don't have a recovery cd... I hope someone can help me because I can't find answers on the internet...

  I can't find the type of pc but its old I guess from a pavilion of 87... cannot seek in the pc for the exact number.

  Thank you!

  I bought a new PC...

• Start LabView menu

  I have a teststand sequence that uses run asynchronous VI to display output to the camera while the sequence is running. When the sequence runs the first DUT the Menu start of LabView (see attached Image) rises and covers the entry window of the UUT. Once the Start Menu of LabView is reduced to a minimum, everything goes well until the test sequence is stationary then turns the Start Menu of LabView. Y at - it anyway to keep the Start Menu of LabView always minimized or even better make sure it never comes upward during the execution of the sequence. I spent hours trying to reconfigure LabView and TestStand with no luck. It comes to cunfusing for operators to use

  Hey Jimbo,.

  Could check you your LabVIEW adapter settings (configure > adapters > double-click LabVIEW)? This screen should appear only if you use the LabVIEW development system, and generally for the operator-run test you want to use the runtime engine instead. This could help with the issue.

  Another thing you could try is to set up the camera output window so that it is modal to TestStand. You can find an example of this integrated to TestStand; Basically, there are 'Start a modal dialogue' and 'end of modal dialog"live in the palette of TestStand in LabVIEW. These screws allow you to configure a VI to appear in modal form to TestStand.

  I'm leaning towards the parameters of the card being in the likely case, but let me know how to make these steps!

• start missing rtl120.bpl

  original title: getting started

  on startup rtl120.bpl that said he is missing from my computer

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/what-is/5235cc96-d395-41a4-B673-ec03ebdf4c19

• F4U52EA: Start flag Menu does not work

  My laptop to stop one day and found out it was the connection cable. So I bought a new. But now I try to turn on the laptop and get the message YOUR START MENU is NOT WORKING.

  I borrow more than two times and still get the message.

  What I could do to try to fix it, pls?

  Thank you

  Hello

  Try the following.

  Click with the right button on the Start Menu and select (Admin) command prompt and click 'Yes' to the uac prompt.

  In the command prompt window, type powershell and press to enter.

  Copy the following text and paste it into the command prompt, and then press ENTER.

  Get-AppXPackage - AllUsers | Foreach {add-AppxPackage-DisableDevelopmentMode-register "$($_.) {"InstallLocation) \AppXManifest.xml"}

  When it finished, type exit, press ENTER, and then type exit and press enter once more.

  Reboot the laptop.

  Kind regards

  DP - K

• my computer won't start - missing or corrupt the isapnp.sys file

  original title: my computer does not start

  my computer does not start.  It has windows xp.  stupidly, I cleaned the keyboard when the computer was done.  After that, he went and couldn't boot more.  response on monitor: "windows has not start because the following file is missing or corrupt: system32\DRIVERS\isapnp.sys.»  You can repair this file by starting windows configured using the original set of CD-ROMs".

  What should I do?  I don't have the cd rom.  My documents have no back up.

  If you have the CD, use you it as a reference: http://support.microsoft.com/kb/315311

  How to get installed XP on your computer? What type/brand of computer do you have?

• Start options menu appear in the taskbar - how to display the Menu start properly again?

  One of my students has somehow managed to get all its options of Start Menu in the taskbar.  The Start Menu does not pop up as it should.  I tried to fix the problem using all conventional means relating to the Start Menu and taskbar in properties, but none of these options cover this problem.  Please someone can suggest how she got the screen in this State - and how we can go back to how it should be?
  Thank you.

  Hi Questril,

  You can try using fix tool available on the microsoft site: http://support.microsoft.com/kb/886549

  I hope this helps...