My ts-tb23l hp dvdwbd dvd drive won't recognise dvd-video.

Similar Questions

• Satellite P30-145: the drive won't recognise DVD double layer

  I have a Satellite P30-145 with a SupermultiDL DVD player. When I got the PC, I could write DVD double layer with no problems. Now the drive will not recognize DVD double layer at all. Even those from the same box that has worked well before. I use are Verbatim Double layer DVD + R 2.4 x discs.

  After a lot of internet research, I have downloaded and run DVDInfoPro. This application has reported that the Player did not support the DVD + RW DL. Very strange!

  Can anyone help? The drive is a carpet * a DVD-RAM UJ - 831S.

  Hi Lan

  This disc is certainly DL one, but I can imagine that the drive is defective and cannot calibrate lens in the right position. This model of laptop is more than two years, and if you have used this drive extensively, I can really imagine that the DL function is defective.

  What you can do is to clean the lens and see that it will help.

• Combo DVD - RW drive won't burn a disc

  All of a sudden yesterday after burning DVDs my DVD - RW combo drive won't burn a disc. I tried to run the Microsoft patch for CD DVD stuff and he said:

  the selected disk is not able to write, if you have multiple CD DVD players try to use another drive, otherwise you may need to install a CD DVD burner to burn with Nero, it says: this device needs a DVD R/W... and the fix format disc, it says the drive is not capable at all.  Also, when I go to the drive in my computer, it shows the drive as a CD drive.  I replaced the Combo drive with a new one and still have the same issues. Help!

  Hi Mkadv,

  ·         Have what Microsoft Fixit you tried?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: CD-DVD combo drives have two lenses to write CDs and DVDs, respectively. First check with the manufacturer of the computer if the glasses are intact.

  Method 2: To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.

   

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

   

  Method 3: The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641/

   

  Let us know if that helps.

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My CD drive won't burn

  My CD drive won't burn a cd, it will try to burn them and then writing on the cd it says: an error has occurred. How can I solve this problem?

  Hello

  1. What is the full error message you get?

  2. what type of disc you are trying to burn?

  3. when the problem started?

  4. have you made changes on the computer recently?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hope this information is useful.

• M30X bios does not detect the hard drive, won't start HD

  Can someone help me in this problem.

  My satellite m30x hard drive won't boot, rather trying to boot from the network.

  Tried to load the installer by default, and Hd will not appear on the settings

  tried original reistal toshiba software CD and the message that no target disk appears

  Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

  Thanks in advance for some light on this problem

  My M30x has the same problem. I just used 2 months.

  I sent it to the repair center as I was told to do, because it has guaranteed.

  I'm still waiting for a response from them. I don't know what caused it.

• Pavilion DV9008DR Nvidia coprocessor SMU driver won't load

  After finding drivers almost everywhere, I met several for the 340 Nvidia nForce / GeForce 6150.  Some are for Vista (from HP), a set for Win7/Vista from Nvidia itself.  All have one thing in common.  The 'coprocessor' remains 'driverless' after the Nvidia installer is done.

  Looking at the PCI device ID, is seller 0x10DE (NVidia) device x 0271 coprocessor (nForce System Management Controller).

  The driver load without difficulty in XP, but the updated driver won't Win8.

  A thought has this load manually through Control Panel Device tool as an update of the driver selected with its .inf file.

  It is a driver that this continues to be a complete installation.  If it will not charge, what will be missing.

  Dan-

  I do not quite know compatibility mode, but I've done the following with the NVidia 15.49_nforce_winvista_win7_32bit_international_whql.exe driver package that is very similar to sp36079.exe

  1. launch the .exe.  As before, it loaded everything except the NVidia coprocessor driver.

  2. went to the Control Panel Device Manager

  3 find the coprocessor and went to properties-> Driver-> update driver.

  4. browse for the file SMU in the .exe 'burst' (including the .inf, .cat, .sys, etc.

  5A accepted.

  6. received the message that this driver installed.

  7. looked in Systedm devices and found nVidia nForce PCI System Management.

  8 looked the driver version and found it wasn't NVidia, but Microsoft, Date of 06/21/2006 driver Version 6.2.9200.16384

  If something happened, but no idea what it means.  (maybe the driver was already there, but need to Win8 "inviting them to find it?)

• Adobe Flash Drive won't let me uninstall it

  Adobe Flash Drive won't let me uninstall it from my computer and the software that has been added with it, then a pop up of Adobe said that you'll never

  Remove it from your system! It is a too important control for this software to have!

  mernetta @ aol.com

  Hello

  ·         What operating system do you use?

  ·         What is the exact error message you get?

  ·         Are you referring to Adobe Flash player?

  ·         Why are you trying to uninstall Adobe flash player?

  You can visit this link and check if it helps:

  Uninstall Flash Player | Windows

  http://kb2.Adobe.com/CPS/141/tn_14157.html?promoid=DNRTE

  You can visit the   Adobe Flash Player Help and Support page   help with questions Adobe.

• How can I copy my own DVDs dvd-video on an iMac?

  I saved a huge amount of old movies on my reader dvd recorder and now wonder if I can copy so they can still play on the dvd player - an old Panasonic with component cables to connect to my old TV with the large projection in the back [a picture tube?].  I tried to make copies with my new mac that has El Capitan, but it won't work.  If I try to make my own movies via iMovie, they will not play on my old player because he apparently only play movies in dvd-video format [DVD-V], not the new divx format.  Any suggestions?  I tried Googling but can't find an answer.  What is interesting is that the dvd drive on my mac of El Capitan will play my old DVD.  Why they can't be copied?

  If they are records of commercial films, then the DRM/copyright protection could be the cause - you are not allowed to copy commercial movies.

• Error e/s on the insertion of a DVD video disc - Satellite A105-S4284

  My mother bought a Satellite A105-S4284 during a stay in the States. DVD - RAM UJ - 841S with her drive is set to 1 in the region for DVD playback, I want to get it on region 2. I told myself I have 4 changes left, but I am unable to change it. He asked a zone 2 DVD to be inserted and I have administrator privileges - the two conditions are met, but it refuses to work. I then tried to see if she could read the disc at all, however try to access it from the browser I get an IO error. I checked the disc with a variety of drives, CD-ROM, CD Audio, the Toshiba installation/config DVD etc. all read fine, but not DVD-video. I deleted the DVD RAM driver, sought of firmware updates (cannot find a suitable) and updates of pilot (impossible to find).

  I can't work on why he dislikes the video DVD (I tried a lot of discs), even tried with the Media Express Player playback. Because it reads all other formats of discs, it seems unlikely to be a hardware problem, so I think it's a problem with the firmware, but like I said I couldn't find one.

  Any ideas would be greatly appreciated.

  Kind regards
  sab0tage

  BTW happy Christmas

  Hello

  Do you have the drive to region 2 now?
  This might be a reason for the exploration of DVD-related issues.
  It would be very interesting to know if it of possible to explore this DVD on the other computer.
  Additional I think lots of original DVDs is safe and supports some kind of encryption and, therefore, it s not able to open it with Solution Explorer.

  I put t know why you were not able to change the area by car, but perhaps this has something to do with the operating system installed.
  Have you tried to install a new OS from an original CD of Microsoft, and then change the region on the drive?

• Comment do pour enable management to create a dvd video with media center record tv

  Hello.

  I own a pc windows xp media center 2005.

  After the failure of the United Nations;  I have to make the United Nations for the complete matting;

  but media center won't be supported the creation of a dvd video taped tv programs.

  What to do do. Thanks for any help.

  Kind regards.

  Lea (email) * address email is removed from the privacy *.

  Hi Mary-lea,

  Unfortunately, the Microsoft answers Forum is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

• I wonder if anyone is familiar with this type of problem with the help of a Windows Media Player for DVD videos.

  Hello!
  I came across a problem with my dvd on my laptop drive. The program that I use on my laptop is Media player from Windows. And the laptop will recognize the DVD and everything, but when it starts to play, it gives me this message from Windows Media Player: "Windows Media Player cannot play video DVDs. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings. »

  Now I always use the old Windows XP for my laptop, but I can't seem to understand how to adjust the color quality and lower my screen resolution. Does anyone have a little step by step process that I could follow to do this?

  Lyn24 wrote:
  > Hello!
  > I ran into a problem with my dvd on my laptop drive.
  > The program that I use on my laptop is Media player from Windows. And the
  > laptop will recognize the DVD and everything, but when it starts to play
  > gives me this message Windows Media Player: 'Windows Media Player '.
  > can't read DVD-video. You may need to adjust your Windows screen
  > settings. Open display settings in Control Panel and try again
  ring your screen resolution and color quality settings. »
  >
  > Now, I still use the old Windows XP for my laptop, but I can't
  > seem to figure out how to adjust the color quality and lower my screen
  > resolution. No matter which deals a little step by step I have
  > could follow to do this?

  The problem is that Windows XP does not play DVD movies in native mode. You can
  have a DVD player, but it can only read DATA DVD at this time. In the order
  install a DVD codec to read video DVD discs. First we will
  Install this program from Microsoft and run it, and if you have a DVD
  Codec, it will appear in the display window. Download this program from
  here:

  http://www.softwarepatch.com/Windows/windowsdvdmpeg.html

  If it shows that you don't have a codec DVD installed, then you can
  buy one on one of the links on this page:

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  --

  Roy Smith
  Windows XP Pro SP3

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• does not read dvd-video

  My Envy 17-1181nr just got Win7, reinstalled by HP.  Now, the player plays BluRay very well but does not read the DVD-video.  The drive makes noise, a video DVD of loading then the video starts and stops a few seconds.  I uninstalled the device and reinstalled with the updated drivers.  Suggestions welcome.  Bill

  Hi Bill,

  My mistake, I forgot that your laptop is a slot player.

  You should find that any store computer will store a disc, which you can load into the reader who will perform the cleanup - the disc itself was fine on brushes that will clean the lens.  The only point I want to emphasize, is to make sure that when you ask one of these discs, make sure what you say it's for portable optical drive as some are not suitable for the drives in the computer.

  Kind regards

  DP - K

• Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Windows media player cannot play the dvd video.might need to adjust the windows display settings

  Hello

  1. Have you made changes on the computer before this problem?
  2. You get the error message?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Open the troubleshooter in the Windows Media Player settings:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2:

  Install the latest version of codecs:
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 3:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly