my voice comes in Robotics in the conversation

Similar Questions

• Effects do not come in the conversion to PDF

  I'm doing some tests with the catalog, I created and must be sure that everything is fine until I send to print.  I have a white background, which the opacity is set to 50%, and when I did the conversion to PDF, the background came to the course.  Is that all I need to know what is printing this document when the effect has been applied to the images?  I send a PDF over to the printer, that's what they prefer.

  Thank you...

  Fill the frame with [paper], and then set the tansparency for filling at 50%, leaving the normal blending mode. :

  

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• history of the conversations on the new computer

  Hello

  First of all, sorry for my bad English.

  I have a question about the history of the conversations in Skype.

  I joined Skype in 2009 from my old LAPTOP.

  I used Skype on laptop computer for all time.

  Today, I bought a new computer, I downloaded Skype and singed in.

  But I knew the history of the conversations did not save, and I want to see

  the story of my new computer, how can I do?

  Is there a way to copy the files of the conversation on my computer in the new Skype history?

  Thank you much, Noam.

  Hi, sahar5003, and welcome to the community!

  Courtesy of Ruwim and TheUberOverLord, please see this thread that explains in detail how to copy the data from your old computer to the new:

  http://community.Skype.com/T5/general-discussion/how-to-see-my-conversation-history-from-one-compute...

  Best regards

  Elaine

  __________________________________________________________________________________________________
  Your question has been answered? Please click on the link to accept as a Solutionfor everyone can quickly find what works! As a post or want to say, 'Thank You ' -? Click on the button of congratulations!
  Reliable information: Brian Krebs: 3 basic rules for online safety

• Lost in the updating of the conversations?

  When the new version is downloaded, do we lose all the conversations we had in the text of the previous version?

  Updates do not remove your chat history. If you want to be 100% sure of loos, the history of cats, then you can make a copy of the database main.db file:

  https://support.Skype.com/en/FAQ/FA392/where-can-i-find-my-conversation-history-in-Skype-for-Windows...

• iPhoto to the conversion of Photos

  I recently downloaded all my photos on my iMac iPhoto photos and iCloud for backup.

  All my custom in iPhotos albums made it safely through the conversation, but I have a few questions that I don't know how to fix or if they are fixable:

  1. I use to be able to select the Albums I wanted to be downloaded on my iPhone and iPad, now every single Album of Photos on the two which I don't want, is not an option most?

  2. There is now a lot of Albums on my iPhone and iPad that I don't want and I didn't create, can they be removed permanently such as: selfies, panoramas, gusts, screenshots of iPhoto events?

  3. I see this film changed its name to all the Photos, but it shows every single picture that I have in the Photos Application, I don't want all of them on the phone, how do fix you this?

  4. because all the pictures are now uploaded to iCloud, now, it seems to take a long time for all the photos in each album is displayed on the iPhone, is any way to change this?

  5. in each photo album I created a logo/custom icon then when I scroll through all the albums, I could quickly identify what album was that, now, each photo album shows the last picture in the window of the iPhone instead of the first image/photo in this album, is anyway to change that too?

  6. in the Photos application, there is an album called last import a handful of photos out there and they moved into other albums but if I come back in the last Album of import, I remove each picture, then the picture in another album deletes as well?

  Sorry for all the questions, been trying to figure this on my own and I'm wrong.

  Thanks, Jodi

  Firstly - iCloud library is not a backup - it's a library of synchronization service - iCloud Photo library FAQ - Apple Support

  See more precisely

  Do I need a backup?

  ICloud library stores all of your photos and original videos in iCloud, but we still recommend that track you return of copies of your library. You can upload your photos and videos to iCloud on your computer and store them in a separate library, transfer them to another computer with transfer of images or Photosor store them on a separate drive

  1. selective sharing is not an option - as more high ICPL is a service to keep the libraries all connected identical - all additions, deletions and changes made on any device are made on all devices = for devices with limited memory, you choose to use pictures optimized on this device

  2 - no - SystemTop albums like you list cannot be changed or removed - they are part of the system

  3. you can't - see #1

  4 - no - have all devices to complete their initial download? Until they do things are flawed - once the download is complete, I found the continuous updates to be fast - even though I have hundreds or even thousands of holiday photos to sync

  5 - Open the album on your Mac and then right-click on the picture of your choice - select make-button photo

  6. of course - when you remove a photo from the library, he went everywhere, exactly as if it was in iPhoto - exactly like the iPhoto albums are not a place - they are to the Organization and are just a display of photos in the photo library

  LN

• Optimize the conversion of SGL data chain

  As the title indicates, I'm looking to pronounce on a more efficient way (as appropriate) to convert a string into an array of SGL.

  The detachment is just to get feedback on the best ways of doing things from a personal educational point of view. I don't actually have to improve performance... (Just keep improving my skills of codeing.)

  'More effective' here must take to be less cycles of CPU and low memory footprint, in that order. (That is, most small load on CPU is preferred, if smaller memory footprint is at the expense of the other cycles CPU, the hit on memory footprint is preferred).

  The length of the input string comes from a TCP read and contains only the raw bytes of the expected (in this case, SGL) format without any header/footer of meta-data.

  Currently, my implementation is very simple and given that the expected table size is known, I am relying on the loop being smart in his automatic indexation allowance.

  For the conversion, I do a right type-Gallery of 4 characters at once.

  

  The code below, the for loop is simply intended to give a 'real' output boolean if the string length is the length of expected as determined by the input string 'number of track points. No additional error handling is required or necessary.

  I suspect the "subset of string" combined with the iterations (for loop) are the two worst performance in this VI hits, but I can't think of a good way to do the conversion as a table, and if I could, then I should at least do a conversion in 'string to array U8' first.

  Thanks to all who took the time to read and watch. Your time and your contribution is appreciated as always!

  Q

  Hi Q,

  Why don't convert you directly in a table of SGL? No need of a loop FOR, nor for StringSubset...

• BlackBerry, BlackBerry Z10 Z10 - voice of emails not showing the Hub after software update

  I have a BlackBerry with Verizon Z10 smartphone and yesterday I upgraded to the 1.0.4.1 version. Now my voice messages are gone from the hub and I don't even understand notifications whenever someone leaves me a voice message. I called Verizon and they were not able to help. Everyone is having this same problem? If anyone can help? Thanks in advance.

  I had the same problem as you - including voice mail option missing to add to the hub.  No amount of battery pulls or re - start has helped.  Here's what worked for me: go to settings and turn voicemail Visual.  Agree monthly fees of $2.99. Wait 5 minutes as stated then compose yourself and leave a voice message or both.  You'll notice the Visual Voicemail icon (and the message indicator) now appears in the hub.  Return to the configuration and disable my visual voicemail.  Your regular voice mail and test messages, should stay now.  Do not know if you/I'll get accused the $2.99 for 10 minutes of visual voicemail, but it will be useful to come back to regular voicemail.  I hope this helps.  Post back with your results.

• Attempts to convert a word to pdf doc using windows 7 64 bit computer. During the conversion, he goes to the notebook with the following message:

  Hello:

  I'm trying to convert a Word Doc from MS to a PDF file using my new 64 bit Windows 7 system.  When in the Word doc, I go to print, then choose PDF and then after the 'conversion', he goes to the notebook with the following message:

  %% [ProductName: Distiller] %.

  Cambria found, using Courier.

  %% [Error: invalidfont;] [OffendingCommand: show] %.

  Battery:

  ()

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  I'd appreciate someone is able to help me with this problem.

  Thank you

  Aida

  I don't know what PDF "virtual" printer that you use, but you can simply add the free Microsoft SaveToPDF complement for your installation of Microsoft Office and avoid these 'virtual' PDF printers.  Your assistant head of household can already do.

  Office 2010

  http://Office.Microsoft.com/en-us/support/redir/HA010354239.aspx?QueryID=423abf3d3be54a199d634bd88dca8478&respos=0&CTT=1

  Office 2007

  http://Office.Microsoft.com/en-us/support/redir/HA010064992.aspx?QueryID=423abf3d3be54a199d634bd88dca8478&respos=1&CTT=1

  These add-ins are explained, as well as other things, to http://office.microsoft.com/en-us/support/?CTT=97

• The name of the free program to test the conversion from PDF to Word on Mac?

  The name of the free program to test the conversion from PDF to Word on Mac?

  Hi ulfs29898036,

  There is no free program to export the PDF file.

  You will need Adobe PDF Export service https://cloud.acrobat.com/exportpdf to export the PDF file, which can be used with free Acrobat Reader DC help of Acrobat Reader | Help of Acrobat Reader DC.

  Otherwise you can purchase/subscription application Acrobat DC Plans and price | Adobe Acrobat DC

  Kind regards
  Nicos

• After the conversion of server 2012 system_thread_exception_not_handled winhv.sys

  Hi all

  After the conversion of a machine Server 2012 (that is running Hyper-V) and from VMware vSphere 5.5 I get a BSOD and system_thread_exception_not_handled winhv.sys

  I know that I could use to disable the Hyper-V technology, no matter what else it could be?

  ~ eric

  No, I was simply convert a machine that already had the active Hyper-V role. I disabled Hyper-V and transformed again and it started properly.

  However, I found this article on editing the vmx file to allow a machine with Hyper-V enabled to run as a guest in VMware. http://blog.pluralsight.com/run-hyper-v-vSphere-5-1

  ~ eric

• Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Why can't change anything after the conversion in .docx?  Missing functions the tool bar?

  Hi larrys57575985,

  To change a file that you converted to Word format, you will need to download it first and then open it in Word. To download your file, sign in to your account on https://cloud.acrobat.com/files, select the file you want to download and click download at the top of the list of files. Your file will be downloaded in the download on your computer folder. In Word, you may need to click Activate the change at the top of the document.

  Best,

  Sara

• messages text appears not the conversation list.

  I was remove some older posts today and since then when I get them I have to search the name of the contact to find the message. Before, I had not deleted all text messages would remain in the main list of conversation. Now he comes and tells me that my list is empty. Is this a bug or something I did accidentally?

  New update just released 1.3.5 should correct this problem. Since the release notes

  Messaging

  • If a user deletes a conversation with a contact, new conversations with this contact now display correctly in the Conversations view.

• get the conversion failed on the export of PDF files.

  get the conversion failed on the export of PDF files.

  Hi jfcobb999,

  I'm sorry that you are having problems, file conversion. You convert the web interface, or through Adobe Reader? You have a large number of files in the folder root of your list of files on Acrobat.com?

  Try to start these things:

  • Empty the cache of the browser, and then try again.
  • Use another browser.
  • Make sure the drive is up-to-date by selecting help > check for updates.
  • If you have a large number of files on Acrobat.com, some of them move in a subfolder.

  Please let us know how it goes.

  Best,

  Sara

• Cannot start Windows 7 after the conversion of the physical machine

  Hello

  I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned):

  Unable to find the system volume, reconfiguration is not possible.

  Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start.

  Any help to guide me to this point is very popular figure.

  Thank you

  Andrey

  Disk2vhd create a vhd file
  Starwinds V2V converter converts the virtual hard disk into a vmdk
  This vmdk is assigned to a new virtual machine
  first boot the virtual machine goes into a Windows 7 drivers restore CD you patch

  my notes:http://sanbarrow.com/p2v2008r2.html