My Webcam built into my Dell T7570 Doesnt seem to work. Help, please?

I downloaded the drivers needed for the webcam, but he repeated to me that it cannot find the webcam device. Should I buy a new webcam?

SarahReidy,

The operating system has recently been installed? If so, the drivers have been installed in order? How to download and install drivers in the correct order

For the webcam, try to read...

Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

Rick

Tags: Windows

Similar Questions

  • the webcam built into my Medion Akoya laptop does not work with Skype

    the webcam built into my Medion Akoya laptop does not work with Skype... Thanks in advance

    Do Skype supported say when contact you?

  • My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

    My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
    Although of course, the CD-ROM drive worked during the upgrade.
    I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
    PXE - E6i:Media Test Failure, Check Cable
    PXE - MOF: Exit PXE Rom
    During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
    Can someone help me please?
    Best regards
    John

    Besides what abdelhak says:

    The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

    Hope this helps,

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My Hp Pavilion dv99110 us Keeps giving me a message that my webcam device is not found. It came with a built-in webcam and I do not know how to reinstall! Help, please!

    It came with a built-in webcam and I do not know how to reinstall! Help, please! I don't know when it happened because I deliberately it

    Hello

    Make sure that you have the latest drivers and software for your machine

    http://WWW8.HP.com/us/en/support-drivers.html

    If necessary, try HP support

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    or ask in the Forums of HP Support

    http://h30434.www3.HP.com/

  • How can I get my webcam built into my computer at work when he was working before I brought my computer to a professional to get fixed, don't know why it does not work?

    I try to webcam with friends or family on MSN and it says it is already in use. Ive searched the computer better I can and can't seem to find a problem. Help.

    Hello

    Make sure you have the latest vista drivers and software for your computer which you can get your computer manufacturers Web site

    go to their website and look for a driver and software download section

    Enter your model number for the last look drivers vista then download and install

    and look for a manual while you're there on how to use your machine

  • Is there a CC app that allows you to capture videos with your webcam built into your laptop?

    Hello

    I am wanting to movie videos to upload to YouTube and I was wondering if Adobe has capture software?  I downloaded a different software but was not really satisfied with the quality of the recording and thought that it would be better with Adobe.

    Hello

    Adobe first pro lets you capture videos. Please see the following link for more information

    Capture and digitization of images in Premiere Pro

    Apart from this if you are specifically looking to capture video from webcam you can check the following link

    Adobe Premiere Elements help. Capture video from camcorders and webcams

  • Dell local security backup has stpped working help please

    I tried to connect to a new website, I am trying to build, using my laptop instead of the family computer. It was because I had access a.net framework of problem a few days ago. So, I got the message that the Dell data safe local backup stopped working.  And to communicate with Windows. I was directed to do my own research through some links, including this forum. I would be grateful if someone can help me solve this problem. Thank you.

    Hello

    If you have problems with "Dell DataSafe Local Backup" so you will have to contact Dell.

    It is their software:

    "What is Dell DataSafe Local Backup 2.0?"

    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266281

    You can try their Support Forums:

    http://en.community.Dell.com/support-forums/default.aspx

    See you soon.

  • Dell Support Center has stopped working - HELP!

    I get a message on my screen saying that the Dell's Support Center has stopped working and we're looking for a solution.

    I think something happened to this software, but I'm not knowledgeable enough to be able to make it out for me.

    I tried to center of Dell Support from the Start Menu.  The logo appears but nothing else happens.

    What should I do to get it working again?

    Hello

    I had the same problem. Read everything above,

    Tried all of the suggested fixes, but the problem remains still.

    Just before the end of the installation, I got the same message, that is to say:

    "Error getting cert filename (property: Custom Action Data) of MSI.

    As I find it very useful, I was determined to get it back, so...

    I looked in my PROGRAM directory for any sign of Dell Support Center and therein, a subdirectory for "Dell Support Center.

    There were two points in there, or an uninstall program.

    I just remove the entire subdirectory "Dell Support Center", thinking to allow the installation program again.

    then deleted the downloaded "aulauncher" (installation app for Dell Support Center).

    then restarted the pc.

    Then I followed the link to download Dell Support Center of DELL again, the website downloaded, ran it, REBOOTED and all is now ok with my world. :-)

    I hope this helps.

  • The size of the font on the mail coming into my Live account is extremely low. Help, please.

    Original title: change the size of the font on incoming mail

    I use Windows 7 Home Premium and Live Mail email. I could not change the font size on the INCOMING MAIL to read some very small fonts on the incoming mail.

    Hello

     
    When you use Windows live hotmail and the problem you posted is related to Windows Live, it would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
     
    Windows Live Solution Center Hotmail Portal
    http://windowslivehelp.com/product.aspx?ProductID=1
     
     
     
    Thank you
  • Webcam on the Satellite C660 - 18 c does not work

    Laptop does not detect webcam even after I installed the driver (I think).
    Do I need anything else, any ideas where to find the webcam settings? IM on windows 7, 64 bit

    Help please, thank you.

    Post edited by: airidas_1

    Post edited by: airidas_1

    Cam is detected when you use the laptop with factory settings (original preinstalled OS that you got with your laptop)?

  • My webcam is built into my laptop, how do I go into the settings of webcam?

    Hi again, my webcam is built into my laptop, how do I go into the settings of webcam?

    Original title: salvation

    Hello

    You must go to the specific manufacturer of your laptop's Web site for information on how to configure your specific webcam.  You can also take a look at the article with some general information here as well.  Do not know what operating system you use, but the article is for Windows 7.

    Thank you!

  • my webcam is built into my laptop but when I go to video chat it won't work

    Very well. Well, my webcam is built into my laptop and everytime I try to use the webcam it won't work it works very rare and it's this beep I have no idea what it is. so I can't video chat either and its very annoying. Oh, and below I don't know what it is.

    Very well. Well, my webcam is built into my laptop and everytime I try to use the webcam it won't work it works very rare and it's this beep I have no idea what it is. so I can't video chat either and its very annoying. Oh, and below I don't know what it is.

    You know the brand and model of the computer in question (which should appear on the computer and your revenue/documentation)?

    What operating system are you using (be exact; 32-bit or 64-bit and what service pack is installed are both important)?
    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  • built in webcam on Dell XPS M1530 won't work

    has worked last week (girl tried to contact me lst nite & couldn't (could with friends).) I checked and my system says "webcam works properly. I went to the webcam Center, click on the avatar and the webcam lite came. I could also see. I tried to get Dell to help, but they wanted $49 to do anything. hoping someone knows what the problem is.

    Hello

    Dell should have drivers and the control software available on their site. Please refresh your
    If possible driver and reboot before you load the new driver.

    http://support.Dell.com/support/downloads/index.aspx

    Help generic camera:

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack.

    Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/
    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Unable to get any audio from webcams built in mic

    I still can't get audio of my webcams built in mic, I have Windows Vista Home Basic desktop Dell 32 bit, I went into Control Panel and click on hardware and audio and I noticed that one of my card drivers sound is missing it was a microphone icon and he disappeared. I have an old microphone that I connected to microphone before and I did a sound check and it works very well and when I try to use my new webcams built in mic a pop up and it is said (cannot create audio filter). I made no changes to the computer, all my drivers have been updated. The name of my webcam is Gear head 5.0MP HD I tried everything to get the audio from webcams to work, I also made sure the mute was off and she was not dumb.

    Now I know not which driver was missing as far as I know, it's a microphone that was present in the recording tab and he had a microphone and then icon the next day, that the driver had disappeared, I thought to go to the Device Manager, but I don't know which driver it is on and how to reinstall the driver.

    I don't really know what to do and how to solve this problem, can you please help me.

    So thank you for your time

    On the sound, the record tab, tried to right click on the device, and then click 'Show damage disabled' or ' Show disconnected devices? If your microphone has shown, you can set as default.

    To access the recording tab, right click on the speaker icon on the tray (Notification area), in the context menu that appears, click on "sound".

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

  • restarted and can not get webcam driver download from Dell website

    I get a pop up window that says "Application cannot be started. Contact the vendor of the application. Show details:

    PLATFORM VERSION INFO
    Windows: 6.1.7601.65536 (Win32NT)
    Common Language Runtime: 4.0.30319.42000
    System.Deployment.dll: 4.6.1055.0 built by: NETFXREL2
    CLR.dll: 4.6.1055.0 built by: NETFXREL2
    dfdll.dll: 4.6.1055.0 built by: NETFXREL2
    c:\windows\syswow64\dfshim.dll: 4.0.41209.0 (hand. 041209 - 0000)

    SOURCES
    The deployment URL: smartsource.dell.com/.../SmartSource.MediaManager.application
    Server: Microsoft-IIS/7.5
    X-Powered-By: ASP.NET

    IDENTITIES
    Deployment identity: SmartSource.MediaManager.application, Version = 1.1.0.116, Culture = neutral, PublicKeyToken = 284413f54ba8b684, processorArchitecture = msil

    SUMMARY OF THE REQUEST
    * Online only application.
    * Trust url parameter is defined.
    SUMMARY OF THE ERROR
    Here is a summary of the errors, the coordinates of these errors are later in the newspaper.
    * Activation of smartsource.dell.com/.../SmartSource.MediaManager.application resulted in exception. The following failure messages were detected:
    + Activation failed.
    + The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)

    COMPONENT TRANSACTION FAILURE SUMMARY STORE
    No transaction error.

    CAVEATS
    There are no warnings during this operation.

    STATUS OF OPERATION
    * [06/05/2016 15:51:53]: activation of the smartsource.dell.com/.../SmartSource.MediaManager.application began.
    * [06/05/2016 15:51:53]: treatment of the finished deployment manifest.

    ERROR DETAILS
    The following errors were detected during this operation.
    * [06/05/2016 15:51:53] System.Deployment.Application.DeploymentException (Activation)
    -L'activation failed.
    -Source: System.Deployment
    -Stack trace:
    at System.Deployment.Application.ComponentStore.ActivateApplication (DefinitionAppId appId, String activationParameter, Boolean useActivationParameter)
    at System.Deployment.Application.SubscriptionStore.ActivateApplication (DefinitionAppId appId, String activationParameter, Boolean useActivationParameter)
    at System.Deployment.Application.ApplicationActivator.Activate (DefinitionAppId appId, appManifest AssemblyManifest, String activationParameter, Boolean useActivationParameter)
    to System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation (activationUri Uri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String & errorPageUrl)
    at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker (Object state)
    -The inner Exception-
    System.IO.FileNotFoundException
    -The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)
    -Source: System.Deployment
    -Stack trace:
    to System.Deployment.Application.NativeMethods.CorLaunchApplication (hostType UInt32, String applicationFullName, Int32 manifestPathsCount, String [] manifestPaths, Int32 activationDataCount, String [] PROCESS_INFORMATION processInformation, activationData)
    at System.Deployment.Application.ComponentStore.ActivateApplication (DefinitionAppId appId, String activationParameter, Boolean useActivationParameter)

    STORE THE TRANSACTION DETAILS PANE
    * Operation [2016/06/05 15:51:53]
    + System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
    -Status: value
    -HRESULT: 0 X 0
    + System.Deployment.Internal.Isolation.StoreTransactionOperationType (27)
    -HRESULT: 0 X 0

    Here is where I tried to download it from: https://smartsource.dell.com/web/main.aspx


    It comes to my Dell XPS L502X system

    I try to get my webcam doesn't work after my reboot.

    I tried to download

    Reference Dell Webcam Central 2.00.44 01/07/2011

    Please help it is very frustrating

     

    Sorry... I have several tasks simultaneously and typed the wrong thing... I wanted to recreate the image.

    but I thought that what happened... my thought for some reason antivirus program any, that it was a bad file, so I took out quarantine and it worked.

Maybe you are looking for