My Windows 7 laptop displays no text!
Good so it is a big problem. My phone does not text, display when I
If as says LeeGplayer, you are able to restart and go into Safe Mode, select Mode safe mode with networking.
Download the following tool and run a scan complete to rule out malware
If it is impossible to do, you have recovery discs?
Run the Startup Repair tool
To open the system on your computer Recovery Options
- Remove all floppy disks, CDs and DVDs from your computer and restart your computer by using the power button on the computer.
Do one of the following:
If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you must try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.
In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If your computer is not listed as an option, then your computer doesn't understand no repair preinstalled recovery options, or your network administrator has disabled the.)
Select a keyboard layout, and then click Next.
In the System Recovery Options menu, click a tool to open it.
If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the installation disc of Windows 7 or a USB flash drive or with a system repair disc if you have created one previously.
To use this method, you need to restart (boot) your computer using the disc or USB flash drive.
Insert the disc to install Windows 7 or USB flash drive, or a system repair disc, and then turn off your computer.
Restart your computer using the power button on the computer.
When you are prompted, press a key, and then follow the instructions that appear.
On the page install Windows, or on the System Recovery Options page, choose your language and other preferences, and then click Next.
If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.
If you are using Windows or the USB flash drive installation disc, click on repair your computer.
Select the Windows installation you want to repair, and then click Next.
In the System Recovery Options menu, click a tool to open it.
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
Tags: Windows
Similar Questions
-
Windows Vista Basic - display, icon & text animated look and does not fit screen
original title: Windows Vista Basic
After a recent update of my screen, icons, text and little else seems animated and does not have the screen on my laptop. Advice please? I tried to change my screen resolution, but it will only go all the way to the left or all the way to the right.
Hello
There are a number of things to try:
try going to your graphic card manufacturers site or computer and are looking for the driver download section
Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista
then try to make the screen of solution of problems
http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
Change the screen resolution
__________________________________________________________
or try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
________________________________________________________
and change how to get updates for you to choose what you install to stop it happening again
You may need to install one at a time to find the problem, we
Make sure that you do not use Windows Update to install the drivers of 3rd material part
Find them directly in the hardware manufacturer
and when you see the problem update right click on it - UAC prompt - then hide it
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
-
my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid
Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.
If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:
Trial license:
http://Office.Microsoft.com/en-us/try/
Full license:
http://support.Microsoft.com/kb/823570
Get the key;
http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520
If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:
http://support.Microsoft.com/kb/2002262
Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs
http://support.Microsoft.com/kb/927921
Error message when you start an Office application after installing a suite Office: "invalid product key".
http://support.Microsoft.com/kb/836178
If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:
Run the patch tool mentioned in the article below to uninstall Office 2010:
http://support.Microsoft.com/kb/290301
Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:
Trial license:
http://Office.Microsoft.com/en-us/try/
See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.
-
Display the text string on the Capture window
Hello
To capture is used difference two camcorders. What I have is a display of text pasted on the capture window. I do daily catches and what is new. Don't know how the text string is found on the capture window. Capture saves the film along with the display of text. I need to remove this information in order to have a full, clean with only the material captured.
Attached a picture showing the information that needs to be removed.
I use Adobe Creative Suite CS6 with Premiere Pro CS6 on a HP with Windows 7 pro 64-bit z800.
Thank you!
Well.
I played on several bands and this one has its own text. It is burned in. This is most unexpected.
Other assets play very well, as expected.
Thanks for the idea!
Now, I know.
-
The battery icon on Windows 7 laptop not displaying
Hello, I use a Sony Vaio with Windows 7 laptop. It worked fine until a few weeks ago when I installed a Windows Update. Since then, the battery in the taskbar icon has disappeared, and it alerts me when the power is low. The internet connection icon also shows permanently the 'No connection' icon, even if the internet works fine. I tried the steps here: http://www.mydigitallife.info/2009/01/01/fix-network-clock-volume-and-power-battery-system-icons-missing-with-disabled-or-grayed-out-check-box-options/ and here: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/b8ee8d72-4a59-433f-be04-70fd39e1ef88 but nothing works. When I go to the properties of the status bar, the option to activate the battery icon or off is grayed out. Here's what it looks like: http://img842.imageshack.us/i/batteryr.png/ the tray looks like this: http://img600.imageshack.us/i/tray.png/ any help would be appreciated. Thanks in advance.
I was able to restore the battery meter icon on Acer aspire runningXP SP3 by following these steps:
CTRL-Alt-Del all at the same time
Click the "processes" tab
Highlight and select "" Explorer exe.
Click on end process
Click on 'File', 'new task '.
Cut and paste or type: explorer.exe
Click on 'OK '.
CTRL-Alt-Del all at the same time
Click on 'File', 'new task '.
Cut and paste or type: systray.exe
Click on 'OK '.Source: Bruce
http://en.kioskea.net/forum/affich-53991-Icon-Bar-has-Disappeared#.
Hope this helps, Gerry Cornell
-
My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before. My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?
original title: internet connection.Hi vonhatten,
- Did you the latest changes on the computer?
- You receive an error message when you try to connect to the internet?
- You have security software installed on the computer?
Refer to the article below and try the steps mentioned, check if it helps.
In Windows network connection issues
-
The above mentioned laptop displays error Code 39 in Device Manager. I tried to remove the device and scan for hardware, but not able to download the drivers needed to use the device. Help, please. Thanks to you all.
Hello
Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.
There are many causes of Code 39 errors in Device Manager:
a. a required device driver is missing.
b. a required binary file is corrupt.
c. There is a problem with the file I/O process.
(d) a pilot that refers to an entry point in another binary file cannot load.
The recommended solution is to remove the device and reinstall the drivers for this device. As you have tried this step, I suggest you to try the steps mentioned below and check:
Step 1:
Try the fixit mentioned first and check if the dvd player works:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Step 2:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista
http://support.Microsoft.com/kb/929461
Step 3:
Try the steps in the following link and check if the dvd player works:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
If you have any questions do not hesitate to answer, we would be happy to help.
-
Hello!
I joined just a touchscreen multi-touch Dell ST2220T the VGA on a Toshiba laptop. The multiscreen correctly display features, however touch events on the new monitor are sent to the screen of the laptop. There doesn't seem to be a way to make the new monitor the primary monitor, as in something similar here. In addition, if the option to solve this problem in a similar way to this solution exists in Windows Vista, it is certainly well hidden. I've sifted through all the options in Vista and came away empty-handed.No one knows how to fix this problem on WIndows Vista with a built-in screen that can not be changed by default?Hello
Is the touch screen as the default monitor?
Set up your touchmonitor active by default. To do this follow the steps mentioned in the link below
Change-Display-Settings-on-multiple-Monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors
For more information, see the links below
Set up multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitorsUnderstanding multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors -
Computer will display the text but not the graphics
I have a computer that is running Windows 7 Pro 64 bit that will display the text, but will not be graphic print (what I get is several pages of garbled text and what looks like Morse code).
The problem is the same with a HP Officejet Pro 6230 or an Officejet Pro 8100.
The problem occurs if I am connected with a domain users account or the local administrator account.
The problem occurs using the re-discovery of HP network port monitor or the standard TCP/IP port.
Two other computers connected to the printer and also running Windows 7 Pro 64 bit, you do not have the problem.
HP printing and doctor Scan didn't find any problem and is not the problem of printer Microsoft Fixit fix anything.
I will try to assign another driver by following the instructions at:
but I do not know what driver to use.
This Technet article:
suggests that a third-party port monitor may be to blame. I tried to remove the rediscovery of HP Network Monitor, but I get an error and I can't remove it. As far as I can tell, this is the third port only installed on the computer monitor.
I have searched this forum, but could not find a similar problem that has a solution.
What other information should I provide?
Thank you!
Jeffrey Pike
Groton public library
ELSA:
Further investigation of this issue today, I learned that probably, printing problems don't were not due to the computer or printer, but a bad pass that the computer is plugged into. I ordered a new switch, and I hope that it will be the end of my troubles. Thank you for the help that is available to you.
Jeffrey Pike
Groton public library
-
Wireless keyboard Apple ceased to connect to the Windows 7 laptop
I bought an Apple Wireless Keyboard 3 months ago and it works perfectly with my Windows 7 laptop until today - to halfway through editing a word document, it stopped working and my laptop makes the sound as a USB is plugged or removed.
While I tried to remove the device and add it again. Several times. No luck. Then I deleted the device, rebooted the computer and re-added. Still no luck. Whenever I added, it brings to the top of the screen to enter the pairing code and that everything goes well and it appears in the printers and devices window. But it is grayed out, as if it was there but not there.
I tried new batteries, but it made no difference. The keyboard still works perfectly with my iPad.
When I turn on the keyboard, it displays a green light that blinks twice then pause then blinks twice again on repeat (according to the Apple Support Online, it's the device is detectable signal).
I've also updated all Bluetooth drivers on the laptop, but displayed as up to date.
Of course, Apple in charge cannot help me, and phone support from Microsoft could not be.
Any suggestions? :)
Hello
Maybe there is an updated driver for the keyboard which caused the stoppage of work,
If you go to the start menu and type "devmgmt.msc" into the search bar, it will bring you to the Device Manager.
Look for the device in the list, it must be under keyboards, but because it seems to not be recognized, it can be in the tab of the unknown devices.
If you cannot find the device, right click and select Properties, then go to the driver tab.
From there, you can try to roll back the driver if this option is available, or update the driver to see if you can get a working one.
Another thing to do in Device Manager is to click with the right button on the computer on top of the list, then choose the "Scan for hardware changes" and there may be for the device as well.
-
How to display a text in Notepad in hindi font.
If I copied a text to an HTML page that is found in 'hindi' language fonts in Notepad, then it is not printed in English language characters in Hindi language fonts. Please guide me to get the text which I am faced in Notepad is in a font of "Hindi".
Thank you
The respect of
Bhushan K. PinjarkarHi Bobo KP,
I see that you want to display a text in Hindi font. I'll help you with this problem.
1. you have Hindi fonts installed on the computer?
2. what security software is installed on the computer?
3. What is the brand and model of the computer?
4. have you installed the suite Microsoft Office?
Try these steps and check the status.
1 click the Windows 'Start' button and select 'Control Panel '.
2 - Select "Uninstall a program" under the heading programs.
3 - Click the program the list entry to the version of Microsoft Office is installed and select the button 'change '.
4 - Select "Add or remove components," and then click "Next" or "continue".
5 - Click the like next to 'Office shared components' to expand the category, choose expand the category of the "International support".
6 - click on "Police Hindi" or "Universal Police" according to the version of Office, and then click "run from my computer.
7 - click on "continue" to complete the installation of the police. Insert the office disc if you are prompted. Restart the computer.
Once this is done, open a new word document and copy the HTML page which is in Hindi language and then try to print.
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
I recently upgraded to windows 7 ultimate x 64. I'm trying to run a program that display Arabic text, but it shows the instead of unreadable characters. I downloaded and installed the Arabic language pack, but it does not work?
Hello
Is what program this?
Do you know if it supports the English operating system?
You should contact your supplier or the manufacturer of the program and check if this software supports and runs on an operating system with an English Interface. Unicode (Unreadable character) indicates that the software does not support your language.
See you soon.
-
How to set remote spaced further icon to display more text for the name below?
Windows 7 desktop has many icons with similar names. I want that name under the icon. How to set remote spaced further icon to display more text for the name below?
Right-click on the desktop and select Personalize.
Select the color of the window
Select the appearance settings advanced.
Select the drop down next to the element
Go down and select icon spacing (Vertical)
change spacing next to size according to the needs.
-
How to change hardware acceleration on Windows 7 laptop?
I want to check and possibly change the harware on my windows 7 laptop accelertaion followed the instructions found on the internet.
1. choose Start > Control Panel.
2. double-click on customization, and then select display settings.
3. click on advanced settings.
4. click on change settings on the Troubleshooting tab.
5. move the cursor to Enable hardware acceleration
6. click on apply and then click OK to accept the new setting and close the dialog box.
7. click OK to close the display properties dialog box.
8 restart WindowsI got in step 4 but cannot proceed as the possibility to change the settings cannot be selected.
does anyone know why this is and if there is anyway to change the settings of the selectable option.
If not is there another method of modification of hardware acceleration
concerning
If you receive messages on the need to increase "hardware acceleration", it's because you try to run a program/game that requires performance characteristics more that your machine has.
You will find the graphics driver that is available only on the computer manufacturer site. With that installed, if the messages yet, your computer is not running the program/game and nothing you can do will change...
-
Redirect the problem - computer laptop display tablet version instead of the version of office
Hello
I'm having a problem with the wrong version of my site displaying on some devices. Specifically, the version of the Tablet displays on some laptops instead of the desktop version. Here's what I observed:
- Sony Vaio 14 "laptop incorrectly displays the version of the tablet in IE and Edge (Windows 10). It should display the desktop version. Screen resolution is 1600 x 900.
- Computer 14 "Dell laptop displays the desktop version properly in Chrome, IE, and Edge (Windows 10). Screen resolution is 1600 x 900
- MacBook 13 " correctly displays the desktop Chrome and Safari version.
- iPhone correctly displays the version of the phone.
- iPad & iPad Mini display correctly version of the tablet.
Why Sony Vaio did not display the correct version?
I use the latest version of Muse 2015.0 and downloaded all files when publishing.
My site is www.johnblaustein.com
Thanks for any help here.
John
The Sony Vaio is a hybrid between ultabook and what they call the other rank.
+ It has a good processor and cheep
-goes flat batty after 2 hours, the keyboard is too small to be useful, and the touchscreen is the lowest bidder... I guess that is why WX called a Tablet
Maybe you are looking for
-
How to determine or change the DPI setting on a photo?
Our son was killed while serving in Iraq. A group of history approached us, as well as other families, for pictures of our son to use in a documentary of the battle. They asked for the photos in "600 dpi. I have not tried something like that for s
-
Windows Update locks upwards and will not run.
Windows update on my family Vista premium sp2 will not run. has not run since February 5. uninstalled all updates since 01/01/2010 but no help. reinstalled IE8 too, but no help.
-
HP G72860US Notebook wireless help
My Hp G72860us Notebook running windows 7 (my WiFi capability turned off how do I turn it back on) Pls Help!
-
Cannot configure ip multilayer switch (packet tracer) support
Hello I work at tracers of package with this network: All PC's are on the same vlan (vlan 100) and my DHCP server has an IP address on a different VLAN (vlan 500). I did an interface for each vlan on my multilayer switch and now I want to configure a
-
Problem A blackBerry Smartphones to share the same bbm on different phones
Hi all... I really wish that if someone could help me solve my problem! My little brother used my app world ID on his device. Then all of a sudden all my bbm contacts have been added to his bbm and vice versa (which means that its contacts were added