My Windows Xp is not Geniune. And not running the versions of office. did not start second time

Similar Questions

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• Windows Vista does not start - only Safe Mode

  Hello

  Windows Vista does not start. Starts only in Mode safe. Same system of recovery is not backward by date

  Press F8 all turn the laptop.
  Choose the first option: by computer repair and try to repair the operating system automatically.

• Computer laptop HP Presario CQ57 (Windows 7) will not start.

  Computer laptop HP Presario CQ57 (Windows 7) will not start.

  Memory test: past

  Smart Check: spent

  DST short: failure

  ID Q7PS33-5T76ND-MFKR5F-60VV03 failure

  Product ID: QE321UA #ABA

  Hard drive

  Hello:

  The failure of DST short is normally indicative of a hard drive that has failed and must be replaced.

  The operating system and the software can be reinstalled using recovery discs that you made or purchased from HP.

  In order to use the recovery disks, you need to replace the hard drive with one of the same storage capacity or more.

• Windows 7 build in windows game does not start

  Windows 7 build in windows game does not start

  Hello

  ·         What happens when you try to start the game?

  ·         You get the error message?

  Try this:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the games and place a check in the option of games. Click OK

  d. restart the computer

  For more information, see the article below:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP does not start because < root Windows > \system32\hal.dll file is corrupted

  I get the following error message when starting my windows XP Home PC. : Windows didn't start because the following file is missing or damaged

  \System32\hal.dll. Please reinstall a copy of the file. How do I do that?

  This could be the result of a corrupt / missing hal.dll file or boot.ini file. You have your windows disc? If so, follow the instructions below. If you do not have your windows disk click HERE to create a disc of windows recovery console.

  1. Use the Windows XP CD to start your computer.
  2. When you receive the message to press R to repair Windows by using the Recovery Console, press the R key.
  3. Select the Windows installation that you want, and then type the administrator password when you are prompted.
  4. Type bootcfg/Rebuild, and then press ENTER.
  5. When the Windows installation is located, the following instructions are displayed:
     Add installation to boot list? (Yes/no/all)
     [Type Y in response to this message.]

     Enter load identifier:
     [This is the name of the operating system. Type Windows XP Professional or Windows XP Home Edition].

     Enter operating system load options:
     Leave this field blank, and then press ENTER.

     After completing the previous steps, restart the computer, and then select the first item in the start menu. This should allow Windows XP to start normally.

     After Windows XP is successfully loaded, the Boot.ini file can be modified to remove the incorrect entry.

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Windows XP does not start

  Suddenly Windows XP does not start, instead, I get a message that says"

  Type the name of the shell for example, c:\windows\command.com.

  I am able to boot in safe mode but.

  Can anyone suggest what may be the cause of this and especially what should I do?

  Thank you

  Tony

  Thank you, Gerry. But the problem turned out to be a defective drive cable.

  Tony

• Computer laptop Windows XP does not start? Help

  Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

  It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

  When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

  If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

  If you get an error message windows system config, exactly what he says?

  No error paraphrased messages please!

  It was something like this:

  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

  If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  You have all the features non-essential related to the machine?
  Have you installed a new hardware or software recently?

  Try to do a repair install and see if it corrects the problem.

  How to perform a Windows XP repair install

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• Windows XP does not start. Can I boot Windows from a disk so that I can recover the data?

  Windows XP does not start. Can I boot Windows from a disk so that I can recover the data? This should be a CD because it doesn't have a floppy disk on my laptop drive. It is maybe that my hard drive has begun to fail and therefore cannot locate XP startup files. I can not start using one of the other methods of starting for example. Safe mode. If I can recover the data, I can then reload Windows and check the surface of the disc etc etc. Thank you all for your comments. Steve

  Lately, I'm leaning toward the Hiren's BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the most recent version

  The download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract theHirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.

  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.  You will feel at home.

  Using the Mini XP, you can access the Internet, maneuver around your system, copy files, replace the files, run the scans for malware, etc.  There are dozens of free and useful tools included in the CD that can be used to repair your system, or copy files to another device such as a USB device or an external drive if drop in trying to repair your system.

  If you want to see if you can fix your system, describe what is happening when you try to start and to answer these questions:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

• Windows XP does not start - stop error__ registry

  Stop: c0000218 {Registry file failure}
  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE

  -Need to recover my personal files and get windows booted up
  -None of the menus f8 startup help including the last functional Setup
  -The hardware is recognized and works fine

  How to recover a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

  See also

  How to Troubleshoot Registry Corruption issues
  http://support.Microsoft.com/kb/822705

  How to fix a missing or corrupt Windows\System32\Config\System file
  http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htm

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.