My YouTube partially freezes grace every time.

Similar Questions

• My office shows only a partial Background Image every time

  For about 1 week, my office no longer displays the full background image.  Whatever the base image that I chose, that is my personal image or one of the options listed, when it displays on my desk he chops off the coast of the part of the background.  I already went to properties, Desktop and tried different "positions" (alias tile, Center and stretch).  The problem persists.  The only recent change that could possibly explain what I was doing last week online search and my computer started acting weird after that I clicked on one of the sites.  I had to force it to close and when it restarted, my Active Desktop had been turned off (I guess that as a protection).  But since then, I was able to reboot and restore my desktop computer 'active'.  So I do not understand why there is still a prob.  Thanks in advance or any help you have to offer.  :)

  Hi Nicole2012,

  Try to change the resolution of the screen and then try to change the wallpaper.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

   

  You can also read the article and check mentioned below.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Let us know if it helps.

• ENVY-17 crashes every time video full screen is enabled

  I want TO - 17 2090 and whenever I play an online video full screen it freezes.  Every time.  This could be the cause?

  Hello

  Try the following.

  First, download the Flash uninstall utility on the link below and save it to your desktop.

  http://download.Macromedia.com/pub/flashplayer/Current/uninstall_flash_player.exe

  Once the download is complete, close all browser windows and start the program uninstaller.  Once done, restart the laptop.

  Then, download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash.

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the video game okay - if they don't, close Firefox, IE opens ( See Note below ) and click the Adobe Flash even above to get a command prompt to install the ActiveX component.  Once completed, restart IE.

  Note:  If you have a 64-bit installation, make sure that you open Internet Explorer and not Internet Explorer64) and click on the same Adobe Flash link above to get a command prompt to install the ActiveX component.  Once completed, restart IE.

  If you want to use Internet Explorer 64, install Adobe Flash for this browser using the link below.

  http://labs.Adobe.com/downloads/flashplayer11.html

  Kind regards

  DP - K

• Firefox recently began freezing every time I have (a) try to open options (b) try to download a file (c) try to export bookmarks (d) attempt to move a bookmark

  Firefox last month started to freeze every time on a Windows 7 laptop, whenever I have try one of these measures. I tried 'refresh Firefox', safe mode, uninstall/reinstall, nothing seems to help. Cannot open prefs so I have not been able to disable hardware acceleration. However, I managed to set up Firefox Sync which leave me my favorites to another PC, and looks to make configuration changes on that PC affects this copy of FF, so I < think that > I also tried to disable hardware acceleration. Nothing works. Particularly frustrating that the options freeze. Firefox worked for years on the laptop touched, I can do except give up and switch to another browser?

  I downloaded and installed the 64-bit Firefox Developer Edition (40.0a2), using Sync to get my 32-bit profile settings. Options and file downloads work, hurrah!
  --Samedi 6/6: well, only the extensions I use are Adblock Plus and Flashblock and both seem to work well. I < not > enabled the multiprocessue option.

• I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  I instaled Windows 7 64-bit Enterprise edition and installed the latest version of Firefox and it freezes every time that I run. Please help me.

  4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM

  54e24e0e-dfc4-466b-A347-4bd95536773e03-Jan-1312:30 AM

  22d351d2-6461-4F33-9FBD-6d31f769e73103-Jan-1312:30 AM

  8a8da99b-335e-43bb-AA12-4634aa0b431003-Jan-1312:30 AM

  A15bb095-aeb9-44E1-A79C-1a17cee207d503-Jan-1312:28 AM

  A few videos that use the Flash plugin contain a menu entry in the context menu that allows to disable hardware acceleration in flash player.

  To disable the mode you will need to edit the file C:\Windows\SysWOW64\Macromed\Flash\mms.cfg as explained in the knowledge base article protected.

  • http://KB.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3

  See also: how to solve the safe_mode of Flash Player for Firefox? :

  • http://forums.Adobe.com/message/4468493

• Satellite L20 260 won't boot to the top, every time it freezes with no reason

  Hi all

  I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
  x 10, Daniele.

  Hello

  It's not easy to tell if the problem is software or hardware related.
  You must install the OS from the Toshiba Recovery CD and again test the functionality

  If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
  You can try using MemTest 3.5 tool.
  It checks the memory of a malfunction.

• I get a silverlight popup every time I try to send an e-mail, then on computer freezes

  I get a silverlight popup every time I try to send an e-mail, then on computer freezes

  Uninstall and reinstall Silverlight.

• Windows does not start: every time I type my password it starts to load, but then it freezes

  Help, please!

  • my windows vista family premium does not pass the login window, every time I type my password it starts to load, but then it freezes
  • I already try to restart my computer, but it of not working, now will work in safe mode
  • WHAT CAN THE PROBLEM PLEASE HELP!

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Configuration sensor mapping VI window freezes every time that a. STL file is loaded

  The sensor mapping VI gets frozen every time I load a .stl file and the black screen does not appear any model of representation. On the other hand, the same model in a .wrl format works very well. Could someone help me with this problem?

  I have the evaluation version of LabVIEW 2010 SP1.

  Thanks in advance.

  Hi uxpro

  I think that you can have your .stl file in a binary format instead of an ASCI format, perhaps that is the reason of the gel

  Concerning

  Julio Mena

• New Alienware Aurora R4 freezes every time in 50 minutes

  I just got my new Alienware Aurora and oh joy, my first time owning this beautiful Monster - looking for a machine.  I have owned it now for five 5 days; but the experience so far has been frustration, to put it lightly.

  The machine never stays more than 60 minutes at a time.  It crashes.  When it crashes, I hear the fans always roll the led still under the display theme AlienFX I put and it seems that everything is fine, but:

  1. the SCREEN turns off

  2. the keyboard does not work, systems is not responding to strikes again... as the keyboard is dead.

  3 mouse works now.

  4. nothing works, except the DVD tray that always comes out and in.

  5 only the resolution is to force close it down and then turning it back on, via the power button.

  I just installed MS Office, my keyboard and my mouse.  Nothing complicated.  I've now adjusted the power management to ensure that the disc hard system, display, etc. NEVER goes to SLEEP.  Yet, the machine still crashes as usual.  I'm not even games.  Simply creating a document, or watching a training video.  I even decided to just share my training on the Alienware video file and watch the video from another computer; accidents still Alienware and my video stops.  I decided to disable Windows Update, still problem persists.

  I checked EventViewer for clues, NOTHING.  No log entry for when the system unresponsive.  What kind of a computer is what the hell?  I thought that with Alienware, I won't have any hassles, but this has been an exercise in troubleshooting non-stop for me since I got this computer; It became a distraction, as whenever I sit down to work, I find myself troubleshoot the computer each time.  I'm now trying to force me to forget everything and just use my old laptop; that I supposedly replaced when I upgraded to this Alienware machine.

  It's Sunday today, I intend to call technical support for Dell tomorrow to start the support process.  But to give up some lines here just to get feedback / if there are similar experiences that can shed some light on this problem.

  Please any response that can point me in the right direction will be appreciated.

  Hello

  Yes.  A quick update from my post.  I called Dell technical support on Monday 20 October 2014 and the guys were fantastic.  I spoke with a guy named Bogdan; He spent almost 3 hours working with me on the problem over the phone.

  I'll give you a detailed below:

  At the time that I called him, the computer was no longer able to boot the system.  This is because the previous night, I have run AlienRespawn default factory reset, but the shutdown of PC in the process and then was not start over; and instead showed the blue screen.

  So on the phone with Technical Support, we used AlienRespawn USB backup I had created the first day to reset the computer back to factory default.  And then I connected and put things up so that he can have the remote connection to the computer.  As soon as he connected, the computer decided to die just so :).  So we decided to do the Reboot usual cold.  And once again, as soon as it is connected and looking to run some test, the computer exploded again.

  On the third attempt, the computer remained.

  Bogdan then via a remote connection session, several controls and ran several stress-tests on virtually everything (RAM, CPU, graphics, etc.).  All tests came out, as adopted.  And then we installed software to monitor temperature and other stats like stress tests were running; all readings were really good.  Source of the problem was not yet clear.  We have been jointly shrink on two possible culprits, the graphics card or motherboard (or both in the worst case).

  As we are still brainstorming and then try the AlienFX theme colors, the computer decided that it was time to STOP, once again.  And this time it faced a 6 six sound beeps sound sequence several times.  He did this once before, the previous week.

  The machine had a mind of your own.  It was very random behaviors all the time.  He gave beeps when he wanted to.  He has changed the settings of the BIOS on its own; change the default settings, mode strives / EUFI, etc at random :).

  So we turned and technical support preserved in tests.  He also uninstalled and reinstalled the updated version of the Alienware Command Center.  Even after that, all the readings and the results were perfect, but then Switched OFF the machine once again.

  Makes technical support a call to change the four main components: motherboard, graphics card, MasterBoard and Water-Cooling system for the next day.   So I was expecting an engineer for the next day.  That evening, I decided to install all my software and turn on the computer to a State that is useful for my work and play.

  The morning next day (Tuesday), I decided to continue to use the computer and just keep restarting it out every time.  And then, at some point given around 10:00, he remained THERE for nearly two hours (first time he stayed on this long), I was pretty sure that the problem had gone for an unknown reason.  And to share the joy with my Mrs, the machine went OFF :).

  And this time it's completely DEAD.  It was not turn on anymore.  The LEDs and fan are turning on, but not to life on the screen, the keyboard or the mouse.  It remained so until the Dell technician came.

  To my delight, a Dell technician was at my door at about 14:00, with all the necessary parts.  He was also very friendly and empathetic.  He quickly set to work and replaced all suspect parts.  We went ON and, oh joy :).  The machine came back running.

  He made all necessary BIOS settings and my machine was fully operational.

  I used it for almost 2 days now and no problems at all so far.  It's been great, even if sometimes it's like the trauma remains... I still fear that he might simply turn off on me anytime.  But so far so good.

  So I can say at this moment, the issue is resolved and my device is fully operational.  Thanks for the support.  I hope that my very long story somehow help others who have a similar experience with their machine.

• every time I try to open Manager modules firefox stops working, what can I do to fix this?

  Well, I have a problem with adobe flash player, which had stopped working (I can't watch videoes on youtube). I learned that I can solve this problem by clicking on add-on Manager to control the program. but every time I try to open it start loading then I get the message firefox add-ons stopped working and needs to close. I close it and again click on Add-ons (options / general / manage add ons) is the same thing over and over again.

  Hello, all first please try to update to the latest version Firefox (firefox 18.0.1) - you are using a very old version and insecure at the moment.

  If this does not resolve the issue already, so maybe that files in your profile folder that store the information on your extensions could have been corrupted. Please go to firefox > help > troubleshooting information > profile - display folder... then windows Explorer should open your profile folder. there looking for files named extensions.ini, extensions.sqlite, extensions.sqlite - journal (and in some cases also extensions.txt, extensions.rdf). delete or rename the files and quit firefox, they will be regenerated the next time you start firefox.

  See also https://support.mozilla.org/en-US/kb/Unable%20to%20install%20add-ons#w_co...

• Satellite C660-184 freezes at random times while playing a game.

  Laptop freezes at random times while playing Football Manager 2011. The game is not graphics intensive and worked for about a month with no problems, just recently it started to freeze, and the only thing I can do is to turn off my laptop by the power button.

  I have a

  Satellite C660-184
  Windows® 7 Home Premium 64-bit authentic (pre-installed, Toshiba-HDD recovery)
  -Intel® Core i3 - 380 M processor
  SuperMulti DVD + r (Double Layer)
  -RAM (1066 MHZ) DDR3 4096 MB (2048 + 2048)
  -39.6 cm (15.6 ") TruBrite® HD (1366 x 768) high brightness display with LED back light with aspect ratio 16:9
  -Intel HD Graphics, display memory: 1 696 MB

  My graphics driver is up to date, said my last is 28/07/2010.

  I am at a loss to explain what is happening.

  Help and advice would be greatly appreciated.

  Hey Buddy,

  > The game is not graphics intensive and worked for about a month without any problems, has recently started to freeze
  This could mean that the laptop is overheating
  The reason for overheating is the dust that blocks the fan for laptop gets hotter

  I recommend to clean using a jet of compressed air to blow the dust from the cooling fans. You can do it without disassembling the computer so it is very easy and takes only 5 minutes.
  Just remove the battery and unplug the AC adapter before doing this.

  For example I clean my laptop every 4 months because a lot of dust is coming so it s worth it.

• Satellite L - Youtube causes freeze it

  My daughter has recently been given to this laptop, and whenever it goes on youtube it freezes. She is having to turn it off manually each time. She used Firefox and Internet Explore. She has re-installed Flash a few times and that seems to make no difference.

  She does not return the laptop to Amazon, that she has pictures and documents on this subject. Any advice would be welcome, because none of us are very 'tech' of mind!

  Thank you

  Have you tried to update the latest version of firefox? Please, do it.

• ICX session sharing between EBS and ADF. Navigate from EBS page by page of ADF custom application. but every time I get the session as a GUEST, even if I give valid credentils to enter into EBS.

  Hello

  I am integrating EBS and ADF through sharing of session ICX. Navigate from EBS page by page of ADF custom application. but whenever I get session as GUEST (VALID_GUEST), even if I give credentials valid at the EBS system. I should get a valid session that I have connected with a valid user. As it it a VALID_GUEST that the status of cookie icx, back (he got newspapers/debug) and I am.  Comparing with status cookie VALID icx, so every time system opens the Apps login page.  I used fndext.jar to do this. Please help me on this. I'm not sure it's a problem with DB/EBS EBS system, or the code of the adf. My code spruce is given below.

  import java.io.IOException;

  import java.sql.Connection;

  import java.sql.SQLException;

  Import javax.faces.application.FacesMessage;

  Import javax.faces.context.FacesContext;

  to import javax.servlet.http.HttpServletRequest;

  to import javax.servlet.http.HttpServletResponse;

  Import oracle.adf.controller.v2.lifecycle.Lifecycle;

  Import oracle.adf.controller.v2.lifecycle.PagePhaseEvent;

  Import oracle.adf.controller.v2.lifecycle.PagePhaseListener;

  Import oracle.apps.fnd.ext.common.AppsRequestWrapper;

  Import oracle.apps.fnd.ext.common.CookieStatus;

  Import oracle.apps.fnd.ext.common.EBiz;

  Import oracle.apps.fnd.ext.common.Session;

  / public class MyCustomPhaseListner implements PagePhaseListener {}

  public MyCustomPhaseListner() {}

  Super();

  }

  AppsRequestWrapper wrappedRequest = null;

  HttpServletRequest request = null;

  HttpServletResponse response = null;

  String currentUser store = null;

  String currentUserId = null;

  {} public void afterPhase (PagePhaseEvent pagePhaseEvent)

  If (pagePhaseEvent.getPhaseId () == Lifecycle.PREPARE_RENDER_ID) {}

  System.out.println ("in phase");

  If (wrappedRequest! = null & &)

  wrappedRequest.getConnection ()! = null) {}

  try {}

  If (! wrappedRequest.getConnection () .isClosed ())

  wrappedRequest.getConnection (m:System.NET.Sockets.Socket.close ());

  } catch (SQLException e) {}

  }

  }

  }

  }

  {} public void beforePhase (PagePhaseEvent pagePhaseEvent)

  If (pagePhaseEvent.getPhaseId () == Lifecycle.INIT_CONTEXT_ID) {}

  Channel agent = null;

  System.out.println ("forward Phase");

  FacesContext fctx = FacesContext.getCurrentInstance ();

  request =

  (HttpServletRequest) fctx.getExternalContext () .getRequest ();

  answer =

  (HttpServletResponse) fctx.getExternalContext () m:System.NET.FtpWebRequest.GetResponse ();

  CookieStatus icxCookieStatus = null;

  try {}

  Connection EBSconn = ConnectionProvider.getConnection ();

  EBiz instance = EBizUtil.getEBizInstance ();

  wrappedRequest =

  new AppsRequestWrapper (request, response, EBSconn,

  (instance);

  A session = wrappedRequest.getAppsSession (true);

  tried with "a session = wrappedRequest.getAppsSession ();" / / do not return not of any session

  icxCookieStatus =

  session.getCurrentState () .getIcxCookieStatus ();

  Agent = wrappedRequest.getEbizInstance () .getAppsServletAgent ();

  If (! icxCookieStatus.equals (CookieStatus.VALID)) {}

  response.sendRedirect (agent + "AppsLocalLogin.jsp");

  return;

  }

  currentUser = session.getUserName ();

  currentUserId = session.getUserId ();

  } catch (Exception ob) {}

  ob.printStackTrace ();

  }

  FacesMessage message =

  new FacesMessage ("Session is:" + icxCookieStatus + "" +)

  currentUser + "" + currentUserId);

  fctx.addMessage (null, message);

  }

  }

  }

  Have you checked

  https://blogs.Oracle.com/jruiz/entry/adf_and_oracle_e_business

  https://blogs.Oracle.com/jruiz/entry/adf_and_oracle_e_business2

  http://www.Oracle.com/technetwork/tutorials/EBS-SDK-ADF-1887167.PDF

  https://www.YouTube.com/watch?v=9wGv7yxRgVU

  Timo

• Adobe Media Encoder to Premiere Pro CS4 stops working on the same frame every time...

  Currently, I have Adobe Premiere Pro CS4 and have never had these problems before export. My calendar is less than 3 minutes long, but it deals with several large files. He made perfectly and it plays perfectly in the timeline. When I try to export using Media Encoder, however, it freezes at the same frame every time (which is actually a few seconds in!) then exit breaks down, while I force. I tried to export as many different codecs and the problem persists... same frame. I tried to create a new project from scratch and whisk a few titles and export that to see if it's just export anything. The new project exported very well, however, which I suppose is good news. But yes, my work on this project is very important for me and I reallllly want to export it. Help, please!

  What are the details of the alleged audio file?