N20P - connection of the external camera

Similar Questions

• PC to tv connection error "no signal - check the connections and the external device is turned."

  Original title: pc to tv connection

  I have an Acer Espire Vista 32bits. Connect to a Panasonic TC L32x30 HD TV. The TV has a 'PC' marked port that matches one VGA cable. I have the VGA end of the cable is connected to the TV. The other end is connected to the PC Tower via a DVI adapter to the port where was my monitor.
  TV output is set to "PC". I turned on my PC, the Acer (Bios) screen came. He then shows the block scroll bar. Just as Windows is about to light up, cutting signal. I never get to see my office. A message appears on the screen saying "no signal - check the connections and the external device is turned on."
  I had posted before saying that I had problems ranging from VGA to VGA. That's why I bought the DVI adapter to try another solution.
  I hope I made things clear enough for someone to help him.

  Hello Winston M,.
  I actually solved it. Went to the screen and chose. Connection just how I mentioned. second monitor, default Says. I then checked"Extend Desktop to this monitor.
  As I type this, I can see it on my TV screen.
  Thank you for taking the time to answer my question.
  Problem solved
  Ray

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• ORA-28575: could not open the RPC connection to the external procedure agent

  Hello world
  
  Could you please help me with this problem? I am trying to configure Oracle XE 11 g for external procedures, this because I need to access certain procedures in a DLL in Delphi 6.0, but even with the simplest of the dll that I do, as a sum in C, I can't pass this ORA-28575 error: could not open the RPC connection to the external procedure agent.
  
  It's my listener.ora:
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  (ADDRESS = (PROTOCOL = TCP)(HOST = myPC) (PORT = 1521))
  )
  )
  
  
  DEFAULT_SERVICE_LISTENER = (XE)
  
  and that's my tnsnames.ora:
  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = myPC) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  Do you know what could be the problem? I'm out of ideas and google search...
  
  Also, is there a difference in a call to a DLL in VB and one made in Delphi?
  
  Thank you and best regards,

  See the MOS NOTES:
  ORA-28575: cannot open connection to RPC if "ORA_EXTPROC_THREADED" is set in the registry [945396.1 ID]
  External procedures - troubleshooting errors ORA-28575 [70638.1 ID]

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• MacBook Pro retina 15 inch heats up when it is connected to the external monitor

  Hello

  My problem: When I connect my monitor (LG IPS277L) temperature of my Macbook Pro starts to heat upward. This problem often occurs when I use Facetime.

  I found it really strange because I should have a pretty good Macbook Pro for this.

  MacBook Pro (15 inch, retina, medio 2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Graphics card: Iris Pro 1536 MB Intel / AMD Radeon R9 M370X

  El Captain 10.11.6 OSX

  I hope that someone recognizes this problem and wants to share their solution.

  When you connect to an external monitor, you use the AMD Chip for graphics (without the external screen, most of the software needs only the graphics engine Intel).  It attracts more power and therefore heats up.  All MacBook Pro for this to some extent.  This should be considered normal.  If the computer is actually overheating, it will stop.

• Problem with connecting to the external server

  I am currently using my iMac with Mac OS X Lion 10.7.5 2011 (11G 63). I have an external server connected to the PC of the window. I tried many times and many ways and yet the error "There was a problem connecting to the server" continues to appear.

  I checked:

  -IP address
  -No firewall
  -Access rights
  -Address external & directory servers

  I used my other new imac and macbook and they have no problem connecting.

  Is this an error in version?

  Please do help.

  Read this article on the basis of knowledge of Apple, there may be something you've missed.

  OS X El Capitan: connect to shared computers and servers for files on a network

  Also this...

  OS X El Capitan: to connect to a Windows from a Mac computer

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• iMac buzzing when connected to the external amplifier

  I have external amplifier connected to the new iMac 5K retina. When he plays music or sounds of any kind, through speakers, it's all good.

  However, if you do not play any sound for 20 seconds, it is very light buzzing sound from left speaker only. I logged out (model end 2012) iMac and it works exactly the same.

  This is NOT ground loop or bad cable/amp problem (amp and iMac share same multi socket). It seems that something in the iMac will sleep, open the circuit, making the high output impedance, making the left channel pick up noise from the power grid. HiFi, impedance of the output device installation is low, effectively killing most of the HF/RF interference in the cable.

  It is very annoying problem that I scoured my decent sound, high-end amp/speakers. Any ideas or solutions (Apple I hope you read this too, it's unacceptable on 2000USD + machine).

  Apple is not reading this. This is a user forum. Certainly, this looks like a bad cable from your description.

• Connection of the USB camera - OR-IMAQ for USB cameras installation problems

  I tried to install the usb http://zone.ni.com/devzone/cda/epd/p/id/5030 camera application

  Unfortunately it does not work. I don't know the usb icons in my function palette. can you help me please?

  I want to only connect a camera usb with labview. How can it be difficult. any help would be appreciated.

  see you soon

  Hello

  You first need to make sure that the USB camera is DirectShow compatible.  If it is not it will not work with the software of our vision. You must use the drivers IMAQdx (which requires a license) to acquire from a USB webcam.  Once you have installed the drivers IMAQdx (Vision Acquisition Software) and drivers that come with the webcam is installed, you should be able to see it able & Automation Explorer (MAX).  Once you can see it in MAX you can use it like any other device in LabVIEW.

  Kind regards

  Greg H.

• Why the host computer is unable to connect to the smart camera on the network?

  My smart camera of NOR-1772 was connected to our network and functioning as a target to a host computer.  The two are running VBAI 2011.  The camera has been moved to another location on the network and another computer is used as the host? The host is connected to the wireless network.  The camera works fine when connected directly to the back of the computer.  Thank you.

  Hi Joel,

  Yes, it makes sense.  I noticed a corellation when I am set up and where I lose the connection.

  Thank you.

  Rob

• HP Split: Port HP Split HTMI spoiled, any other way to connect to the external display

  HTMI HP Split connector seems weak and unable to detect the external display. Troubleshooted HTMI and HTMI port to the monitor cable to be ok. May need another way to connect to the screen, otherwise repair port (don't know not so easy to fix). Enjoy the century lights.

  2 way possible. There is such a thing as a usb adapter to HDMI.

  http://www.Amazon.com/cable-matters-SuperSpeed-adapter-2560x1440/DP/B00BPEV1XK/ref=sr_1_2?ie=UTF8&QID=1428145993&SR=8-2&keywords=USB+to+HDMI

  USB 3.0 models provide a very good experience. Also if your laptop has the right hardware (Intel processor and wifi card, usually) you can use WiDi (Wireless Display), but unless you connect to a Smart TV with built-in WiDi you need a WiDi adapter.

  http://www.Amazon.com/NETGEAR-Push2TV-wireless-Miracast-certified/DP/B00904JILO/ref=sr_1_2?ie=UTF8&QID=1428146112&SR=8-2&keywords=WIDI+adapter

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• PAP2T loses the connection when the external ip address changes

  I have a PAP2T adapter connected behind a Netgear DG834GT router.  Usually, I have no problem, however, my ISP has been known to change the dynamic IP address from time to time.  In this case the adapter will stay online until the reg expires during which he is not able to save the time and I get the error "unable to connect to the server.  Therefore, the only way I can get the adapter to work again is to restart the router, then restart the adapter.  If I reboot the adapter only it will not connect.

  I have the router providing a fixed ip address via DHCP. I have active STUN and the I the active NAT and NAT keepalive mapping.  The "reg expires" is set to 60.  When the adapter is connected correctly, it shows the external IP correctly.  However, it will not update after the external ip address change until I have restart the router and adapter.  I thought to get a static IP address, but try to avoid paying for it. Is this a common problem?

  I'm rather new to VOIP and I hope I have given you enough information.  Any help would be appreciated.

  Thank you

  Kirk

  I finally got to work.  It turns out that I had to do an update of the firmware on the router and then place the card in the demilitarized zone.

• Unable to connect to the external display

  Original title - Alienware m17X

  My function keys stopped working, I am tring to connect my Alienware 2210 monitor I hooked up and working before, my computer tells me that it is not connected. The HDMI is plugged into my screen and my computer. When I'm on my desktop and I right click for inside, click Customize my display settings that I click on that opens and then click on connect an external display and it says no connection. All this was that I have to type FN/F6 to change the display of laptop to external display. I know it's a setting I prevent my FN keys work, but I don't know how to fix it?

  Hi RandyHester

  1. what happens if you use the function keys?
  2. What is the exact error message that you receive when you try to connect?
  3. try you the office mirror or extend the desktop on the external monitor?

  Please refer to the below links and check if the information provided allows -http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  I hope this helps.