n52 Norstromo controller, 64-bit driver may not work properly.
Troubleshooting Win7 says he detects a problem and windows
Don't let me know when there is a difficulty. Is there a but that really works?
DuffTexas
DuffTexas,
The driver that you downloaded is for Vista. According to the Windows 7 Compatibility Center the Belkin game pad does not show as compatible for the moment. It seems that they still work with Belkin to make it compatible with Windows 7 hardware. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Original title: How do I install the audio device for windos xp driver.
Tengo una don't destop pero no works el sonido y me lo siguiente al try using el windos Media Player appears: it might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. AS PUEDO HACER PARA CORREGIR EL ERROR!
Hello hernan.
· Do you get the Windows default sound on your computer?
· You did it of any hardware or software changes on the machine before the show?
You can follow this link and check if the problem persists.
Hope the helps of information.
Please post back and we do know.
-
Blocks - Spooler subsystem or the display driver did not work properly
I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?
Hello
1 when was the last time, he did not work properly?
2. the accident happens at random or when executing a particular task?
3 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Check if the problem persists, if she does not follow the steps in method 2:
Method 2:
This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.
I also suggest you to follow the steps mentioned in the link and check.
Do not operate the automated FIXIT. Follow the manual steps and check.
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894/en-us
(Also applies to Windows Vista)
Method 3:
You can also update the display drivers on the manufacturer's Web site or use the link below.
Updated a hardware driver that is not working properly
See also:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash
Hope this helps and keep us informed if you need help.
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
ATI Graphics Driver does not work properly
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!Hello
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx============================================================================
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Carpet * a DVD - RAM in Sat M55-325 drive does not work properly
The Mat * one years (uj-840) DVD player does not work properly.
A symptom of the problem is that the icon does not appear in 'my computer '.
more and she does not recognize the CD.I went to the properties of the drive through Device Manager and saw the following message is displayed:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Click Troubleshoot to start the troubleshooter for this device. »Following the instruction of the troubleshooter, I tried to update my driver through
Device Manager, but it tells me that the current driver is the more up-to-date version.
In the properties of the drive, I found that my driver version is: 5.1.2535.0
I have RecordNow from Sonic/Roxio which is preinstalled on the computer.What is a simple problem that has a solution?
I don't see other actions to find the root of the problem.Thank you
Hello
Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft
I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.
-
Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly
Hello, ASRR here.
I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.
The cursor moves, and works fine but not gestures.
When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.
I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..
When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.
An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.
I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.
I really don't know what to do. Could someone please help?
My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.
Any help would be greatly appreciated. Thank you
> I went the UEFI firmware set up and tried to restore default but without success.
How to understand this? Have you tried to put your laptop to factory settings?
To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.
One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.
-
Sat 1900 - CD/DVD drive does not work properly. How to solve this?
Hello :-)
I have a Toshiba Satellite 1900, bought in 2003. It has a cd/dvd drive called MAST * UJDA720.
For the last 3-4 months he was not working properly with movie DVDs. whenever a movie starts, it does not work smoothly, but in stop-and-go. First of all, I had everything again and it works fine, but lately, he never runs well and some DVD doesn't work well at all. Excuse me it I do not explain, I don't have the words in English.
But maybe someone understands me and can help. My DVD player is dirty? Is there something like a standard CD? Or do I have to give the laptop to a repair shop?
Thank you in advance, I would like to have my DVD player, back to normal - especially as I don't have a TV.
concerning
KimbazuluHello, Kerstin
If you can watch the DVD on the unit I don't think the drive is defective. I have the same unit and still work well. Stop and go while playing DVDs can be caused due to the high utilization of the processor.
Please try to start the Task Manager and check all running processes. All unnecessary processes can be stopped and on this way, the CPU will go to a lower level. If the antivir software is installed on your unit checking if this software analyzes the HARD disk and stop it.
These things together can be responsible for stop and go while playing DVD movies.
Good bye
-
Qosmio G30 - a new CD/DVD drive is not working properly
Hiya all
I hope someone can help me. I had to replace my TS-L802A drive by another of the same model, except that when I replaced the drive I have problems to boot the CD and the laptop (Qosmio G30) rejects saying CD error at startup.
I managed to install the operating system from a flash drive and it works great except for the side of cd rom of things. I have the flash player so that the laptop to recognize it? If yes how can I do to do that. I think the chipset for the optical drive is set as slave or something and not master.
Help, please!
Hello
The readers of CD/DVD slimline for laptops are controlled by the firmware.
The firmware controls the master/slave/c-selc settings.You need a player that is compatible with Qosmio G30.
Your drive you bought may be compatible with a laptop, but if the settings are not compatible with Qosmio G30/bios of the controller, then, you wouldn't be able to use itThere are no jumpers or anything else that could be changed as mentioned that he controlled by software
-
Portege Z930 - display driver does not work properly
Hello
We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.
First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.
Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.
On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).
In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.
We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.
So, how can we get this working properly?
Thanks in advance and best regards,
N. CochemsMore importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).
It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.
Verify that the Intel drivers are installed properly in Device Manager.
-
Xbox 360 controller/joystick for PC does not work properly in Battlefield bad company 2
I recently black battlefield 2 and bad company xbox 360 wired to use with the game controller. Once both parties had been settled, I went to the settings in the games options and tried to attribute the actions with the buttons of the gamepad /, but here the rub. Not all the buttons of the gamepad a response, as the right analog stick and the arrow keys. Some of the buttons that do not give an answer have different names /-are mixed with other keys, as the right trigger. When I try to assign the right trigger for fireing, she appears as axe1 x and does not work in the game.
Some of the buttons that work are the x button and the stick analog left and right and left bumber.
I did not so much to try to solve the problem, as I have really no idea what to do. I thought to uninstall and reinstall the game, but that would help? Also perhaps reinstall the controller, or by downloading a driver for him on internett. It was installed using the disk resulting.
The problem, in the game or in the controller? Perhaps driver? Where would I go to file a complaint, get my money back?
Any help would be much appreciated!
-Mathiasshow
Hello
· This problem happens only when playing Battlefield Bad Company 2 and other games as well?
I suggest you run another game on your XBOX360 and check to see if the same problem happens.
If the problem occurs with all the games then I suggest you to contact the hardware manufacturer.
If the problem does not occur with a different game then I suggest you uninstall and reinstall the game and see if the problem is resolved.
Please visit the link provided below for more information on how to uninstall a program in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
You can also post your question on the link below:
http://www.xbox360forum.com/Xbox-Forum/Forum.php
Thank you, and in what concerns:
Naman R - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
My audio does not work even though device manager says my driver is not working properly
After I re installed Windows XP after the blue screen problems continued I was not able to get my audio.
First of all, I tried several different versions including the MB CD driver and those on the site of Asus for my motherboard. I tried later and I tried the oldest. The only way I could install the driver should disable Microsoft high definition UAA, install the driver, and then I managed to install. I don't know if that is related to the problem.http://snag.Gy/fZi6Y.jpg In the photo, he says no device audio, even when there is a good.http://snag.Gy/4R58T.jpg On the photo, it says that the device works properly. However it only works for a select few programs: League of Legends and my Realtek HD Audio Manager.http://snag.Gy/1C8yj.jpg On the Realtek HD Audio Manager, there is no playback or recording device. I don't know why because my driver is correctly installed.http://snag.Gy/CzhyY.jpg Inside of my Realtek HD Audio Device in properties I found this. It is said that it is enabled but not installed right which is in contradiction with what he says on the 2nd picture. It is said that by noon, table of mixer and Line-in as well.http://snag.Gy/D04a4.jpg It's the only thing I don't understand. I tried to install a driver on it, but it does not. I think that this could be the cause of the problem, but I am open to any response.Motherboard: Asus P5QL ProSound card: integrated on motherboardWhat I tried:-J' I re installed and rebooted several times. I tried at least 3 different versions of the drivers of MB DVD + Asus official website.-J' checked bios to make sure that it is enabeled.-J' checked Microsoft Update and am up to date on all updates.-J' tried to use Microsoft Fix - it and it did not help.If there is anything I can do or that you must see tell me and I'll post it.Thanks for the help, MDQHi MDQ.
It may be a problem with the sound card. Try to use another sound card and check if the problem persists.
-
The Cam Driver does not work properly
Hello my product no model is hp 15-r015tu and I download all drivers, but there are still my cam does not
When the youcam driver install in my lappy there give me something error.then missing in driver pack
My OS is win-7 ultimate 64-bit
Hello @JACK_0301 ,
Welcome to the HP Forums!
I understand that the webcam on your HP Pavilion 15 laptop does not work.
Please make sure that you use the following download to install the CyberLink YouCam software for your notebook: Cyberlink YouCam software.
Can you please tell me if there is a version of the currently installed YouCam software and the webcam works in this software?
Also, check in Device Manager for devices of imagery for any conflict with the webcam. It should display with no X,!, or? symbols on the appliance.
You can also restore the laptop to before the show began. You can do this by tapping F11, while the laptop turns on to access the HP Recovery Manager and selecting the restore option.
Let me know if it works!
-
Devices may not work properly after the upgrade
While trying to update, I received this message:"These devices does not work after the upgrade.Before the upgrade, we recommend that you update the drivers for those devices.Cancel the upgrade, open Control Panel and search for"update device drivers", or select the instrument manufacturerWeb site to search for updated drivers.Storage controllers: controller IDE ASZE9NGBI searched Google, Bing and Microsoft and... nothing. Please help me! Thanks in advance!
This diagnosis you have done to date?
Did you look in Event Viewer?
Error messages?
Please provide details about your current problem.We are better able to help you if you help by providing us with as much information as possible...
Suggestions for asking for help on a site.
http://support.Microsoft.com/kb/555375
http://www.CatB.org/~ESR/FAQs/smart-questions.html
http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
-
remove the Windows 7 hard drive is not working properly
window 7 remove the HDD does not work please give answer
Hello
This problem is limited while disconnected from the particular devices?
This problem can occur if there is no program or external driver file is still open or running.
I suggest you to check in windows Explorer and see if there are.
Maybe you are looking for
-
How can I Exchange AppleGiftcard I can not redeem on ios need me a computer or laptop to buy? And how?.
-
Firefox has become very slow to load. After about four minutes, the Firefox image for a Web page is displayed. Finally, the screen for my home page (Bing) fills the screen. I get the following error message: "WARNING: unresponsive script: a script on
-
Satellite L500 - can not find the drivers for the keys FN for Windows XP!
Hello. I found and installed all the drivers I need for this laptop using Windows XP. My problem is that I can only activate wireless on this laptop in pushin' FN + F8 key, I installed the Realtek Wireless drivers and they are installed correctly, bu
-
I can save fax instead of print it?
With a M1217nfw Pro LaserJet I have not found a way to tell him to keep the incoming faxes on the computer instead of print. Is this possible.
-
Questions about the use of cards microSD w / the "rocket"
Let's say I have a microSD card that is loaded with music, and it is already inserted in my rocket, indexed and working properly. Now, let's say I have connect my rocket to my computer and add music more on the micro SD through the "rocket" card. C