: Name bundle terminal Unwired or bad

Similar Questions

• How can I fix a node library to compose with a terminal unwired or bad?

  I am currently working on a program that is designed to send and receive analog data to/from a BNC-2090. Somewhere along the line, LabVIEW has encountered a problem in the library node call the AO Channel.vi create. For this reason, most of the important Subvi no longer works. I have attached the file I'm working on that. How would I go about fixing this unusual problem?

  The only reason that VI is broken me is because it lacks the matrixbreaker.vi.

  I guess you some how edited your DAQmx screws and broken one.  These screws must be edited and are part of the DAQmx driver.  If you did it on accident, perform a repair of DAQmx installation.

• Unwired or bad terminal

  Hello

  I'm not an expert in labview. I have prepared a labview VI and it is broken. When I try to launch it, then an error message appears "merge signals: contains terminal unwired or bad. Kindly help me to solve this error.

  Thank you

  Hello ramanlvm,

  Try a double click on the error in the error window-it list will focus on the signals of fusion primitive function, it seems that you use to combine the signals in a single file.  You see this error due to one of the basic concepts of LabVIEW - a function requires that all entries are available before it can run. The merger of the primitive function signals is currently sized to accept channels 16 or more, but only six is wired. Because the requirement of stream of all the 16 inputs can never be satisfied, the VI will not compile and run.

  You must resize the function to not require that entries that you use. Click the lower part of the merging of signals feature and drag to resize.

  I also recommend a look at the training tutorials online LabVIEW Core Self paced, you need to have access to with a current support contract.

  Best regards

• How can I name know Terminal

  Dear all
  
  I have Trigger and I need to insert the name of the Terminal (Client) that Insert or update or delete on a table.
  
  How I can use it.
  
  Select the terminal
  in v_terminal_name
  session $ v
  where audsid = userenv ('SESSIONID');
  
  When to use this pl/sql in the trigger, the error of v$ session
  
  PL/SQL: ORA-00942: table or view does not exist
  
  
  Thanks in advance

  By using the following query, you will get the terminal.

  SELECT SYS_CONTEXT('USERENV','TERMINAL') FROM DUAL;

  Kind regards
  NTR

• Unable to connect to eBay: tells me user name and/or password is bad, but not so much.

  When I try to connect to eBay I said (in red) the user name or password is incorrect, but is not. No problem with IE.

  Looks like you may have an old password saved in Firefox.

  The instructions here should be able to help remove your ebay password saved.

  https://support.Mozilla.org/en-us/KB/make-Firefox-remember-usernames-and-passwords?#w_viewing-and-deleting-passwords

• Win7 can't access admin. I get the newspaper name failure unknown user or bad password

  I tried the suggestion in another of those posts – forgiveness have misplaced the address - there were 16 separate actions to activate passwords be reset.

  In point 8 - cd/d C:\windows sethc.exe - enter. I crush sethc.exe? Yes/No/all

  When I opted for Yes, I managed to complete the process, but I still had the problem.

  On the second try, I used ALL 8 point and at the end no copy\sethc.exe 15 - got - file not found.

  I find myself with only a user account and I am unable to make changes to the computer, including new programs running.

  You must now press the left SHIFT key 5 times when you are prompted to log on. This will create a black console screen where you can use the "net use" command to reset your password.

  When you're done, plan in advance and create, test and document a spare, even admin account that you have a spare House key. Running Windows with a single administrator account is risky, as you find yourself.

• LabVIEW 2016 NI_ReportGenerationToolkit error

  I upgraded to Labview 2015-2016, but when you open one having previously worked for the project I now see an error in the NI_ReportGenerationToolkit.lvlib:Excel_Save_Workbook.vi.

  He tells me that the invoke node contains terminal unwired or bad.  However, it's a NOR provided VI and has not been changed between updates. Please let me know if it is a solvable issue.

  Take a look at this thread.

  Ben64

• Problem with ActiveX / Excel / LV7.1 in the program who has worked on an old installation of LV7.1...

  Hello

  I have a LV7.1 program that worked when ran on an old installation of LV7.1.

  I installed Office XP and LV7.1 and you can open the program without any problem.  After the opening I ctrl + shift + click on the run button to force the recompilation and the arrow becomes broken.

  All the mistakes I found are the same: invoke node contains terminal unwired or bad.

  Here is a screenshot of one of the erroneous block diagrams.  I hope that the error is recognizable.

  Only two issues I can think of are:

  1. I'm running Windows 7 - maybe the ActiveX does not work the same way?  I'm currently installing Windows XP to see if this corrects the problem.

  2. perhaps, there was an Office toolkit or something used with LV7.1 to create this program?  If so, any ideas on what it was and where I can get hold of it?

  Thank you

  Dave

  

  I suppose that the node to invoke in the picture is the node throwing the error.  Have you tried right-clicking on the refnum automation on the front panel control and a link to the ActiveX component.  If this solves the problem, it's probably the version of changing object model.

  Good luck!

  -Bob

• Problems after editing a Subvi containing a group of dynamic user events

  Hello

  I like the dynamic events in graphical interfaces as a means of code reuse. But this can lead to recording a lot of dynamic events. To handle this, I have a Subvi, which saves them for me. A typical looks like this:

  

  Can I use it something like this...

  

  The first time I do it, it works really well and keeps my code (relatively) pad. The problem that I have met a few times is changing the Subvi. Suppose I have add a new event. Now my "Event Registration refnum' and 'User events' cluster outputs are broken. No problem: remove those, create new ones, bind them to the output terminals. Fine. Now go to the appellant. Maybe I again to clear some unwanted and rewire here and there due to type definitions. Cool, actually. Regard to the block diagram is, that everything will be OK at this stage; There is no broken wires. However, there always pesky errors saying "generate the user event: contains terminal unwired or bad.

  It's obviously some kind of conflict def guy in a mask. I'll generally through the entire schema tearing wires, knots, generate screws of user event, event loops, cluster unbundlers, works. So I have this code all back in hand. This arrow always gray. I'm going to compile mass once or twice. Still a no-go. Make a new VI and copy the code in there. The same problem.

  I have encountered this problem several times and don't think I've ever hit to the solution. Finally, I just go back to before the changes and give up.

  Any idea what's going on? How to get it out?

  Thank you

  Nick

  The error is because the Terminal event data are left not connected to generate the user event which is Terminal type required: https://zone.ni.com/reference/en-XX/help/371361H-01/glang/generate_user_event/

• With the help of the mouse click to return the coordinates of the image.

  Okay, so I tried to find a way to do it, and it seems very complicated for something that sounds really simple.

  Anyway. I have a camera that updates an object image on the front panel using a while loop. I have another image object that is updated with a still image when you press the button "snap." Now what I want to do is to click on a point in the image that are broken and have the VI to return the coordinates of this pixel as part of coordinated image.

  What I have so far is a structure of event in the while loop with the following to happen where "image object-> the mouse down:

  Server reference (reference to the image object)-> property (last position of the mouse)-> output coordinated screen node.

  I have two errors that don't make much sense to me (I have not worked with before event structures): ' event data node contains terminal unwired or bad "and"structure of the event one or several cases of event have no defined event. " This second shot seems odd because I don't actually want nothing to take if there is no click of a mouse. The first seems to refer to the box of the element on the left side of the structure of the event.

  Above is my last attmpt to the trouble of sorting and as far as I can see it should work. whatever about the errors, I even take the right approach with that? I would have thought cordinates image would be quite common but seek advice here, it does not seem...

  A bit puzzled here. Any help is very appreciated.

  Hello RoBoTzRaWsUm,

  I took a glance at your VI, who took a correct approach to the data you are looking for.  As you structure to aid and the event, you should look for an event to occur.  When you use a property node, you try to read an attribute of a control.  However, in a Structure of the event, I think you should use a node to invoke.  Allows a node to invoke your read an event or write a method with the control class in LabVIEW.

  1. place down and call the node in the Palette of functions in "Programming"-> "Application Control".

  2 wire your reference Image control to this

  3. click on the method, and then select 'get a last event. "

  4. right click on "Events that" and "create Constant.  Do the constant '1' in the table

  5. read the Cluster "Contact information" from the left side of the case of the event by clicking and "create indicator.

  You will find a piece of code attached example.

  Concerning

• Request failed to build on call Excel.Print report

  Software development in LV2009 that uses Report Generation Toolkit for reading/writing Excel models. Program works well in development mode. AppBuilder crashes when the *.exe build when adding NIReport.lvclassReport.vi rint

  Dig down, I find an arrow broken to running on the NI_Excel.lvclassReport.vi rint, as shown here:

  

  According to the dialog box display errors, there is a terminal unwired or bad on the call print node; However I did not any changes to this expedition VI (that I know). I tried all unused cable entries (empty strings From, To, and ImprDsNomFichier; false Booleans for preview and PrintToFile, Collate) after I fell on the error, but who had no luck either. Also tried to insert conversions to varying for each input element, just in case there was a problem in the implicit data type conversion variant.

  I also tried ctrl + Maj + compilation of all of the application execution, but this does not seem to get to the non-interrupted, either.

  Someone has to meet this problem before? It's weird that it would break just like that - I had actually compiled this particular executable before, using a few still report Generation Toolkit screws that I use now. The only difference from the last generation, is that I replaced a Report.SaveAs function with a Report.Save function.

  Also of note: I have included all report classes in my project and build specification to compile dependencies in making libraries supported in order to minimize the number of labview files included in the distribution of executable. This is probably why a mistake with the calls Report.vi to print hangs the same AppBuilder so I do not explicitly call that VI anywhere in my code.

  EDIT: both pis. I solved the problem.

  But in case someone else runs into the same issue, here is what I have done:

  Change the Invoke node method. Then change it back. That's all. I don't know why he would spontaneously STB like this, but it seems that the change of the method to another thing and then return to refresh his memory.

  It's always something...

• Group by name graph

  Hello guys =)

  I have a def of Type that contains a cluster. Inside the cluster, there are 4 LEDs Boolean and three numerical indicators. Now I want to add a graphic. Then I drag a chart in the cluster inside type FED. I see all the places where I use my def model to date. BUT. I use offer grouped by name a few places. This list is not updated with the chart. I use the help (CTRL + H), and I see that the thread contains all Boolean leds, digital indicators and a dynamic chart. I try to extend the bundle by name in either sense, and I try to remove it and add a new. Now matter what I do I can not figure in the list of name bundle.

  Do I did wrong?

  Thanks for any help

  Kind regards

  Even

  P.S! I finish work now so I don't have time to attach pictures, but if you need I can do it tomorrow.

  Hi emyh,

  You must give a name to your constant chart. Update inside your typedef.

  Mike

• Third party compiled .dll throws COFF header link error bad member library

  Hello

  Has anyone worked successfully through the binding process and building third-party library files into an executable LabWindows?

  Specifically, I am trying to build an executable in CVI which depends on .dll and .lib files generated using the minGW compiler. (CCG)  This always results in a failed attempt to link with:

  «Aborted load library ' library path/name'.»»»
  And:
  "Header Member bad COFF library."

  I read the docs of minGW, to check, it produces complaint COFF files, by default, but obviously there is something that I missed.

  The dll is simple (two exported functions) and programme aid is even simpler, a main() with a single call to one of the dll_exports.  The following files are included in the attached zip file:

  files for building executable in LabWindows/CVI:
  LWCVI_use_test_dll.c
  LWCVI_use_test_dll.CWS
  LWCVI_use_test_dll.prj
  test_dll.h
  test_dll.lib
  test_dll.dll

  files for the creation of DLL using minGW

  test_dll.h

  test_dll.c

  The following #define is also used to export the minGW project function

  #define DLL_EXPORT __declspec (dllexport)

  Any help will be greatly appreciated
  Thank you
  RYK

  There is something wrong with test_dll.lib, but I don't know what it is.

  You can, however, generate an alternative import within the ICB library comes from the test_dll.h file. Open this file in CVI, remove the #include line, then use the Options | Generate the DLL import library... menu item to generate a new library.

  The import library that I generated using this method is attached.

• My email has become inacccesable and now I noticed that my domain name, computer name, and name of the workstation are all identical! How can I solve it without making things worse?

  Here are the types of error messages that I receive (the first two of Event Manager; 2nd two unsuccessful attempts of Windows Live for you connect.)
  I changed the actual names of my logon, credentials and the computer names, domain and workstation; but the changed names are identical in the same way they are on my system, which is of same name.
  Windows XP Pro
  ===============================================
  Event type: Failure Audit
  Event source: security
  Event category: account login
  Event ID: 680
  Date: 11/05/2013
  Time: 20:16:40
  User: NT AUTHORITY\SYSTEM
  Computer: MrNixon
  Description:
  Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
  Logon account: I have resignation
  The source workstation: MrNixon
  Error code: 0xC000006A
  Explanation
  Adopted a set of credentials for authentication on this computer system by a user or a remote process or by a local process.
  Success or failure appear in the message. If this event indicates success, then the present powers were valid. The error code is 0x0 for success messages. For the failure messages, the domain of the user in the header of the message displays NT AUTHORITY\SYSTEM, and a code NTStatus appears. This is a common list of failure status codes and their meanings.
  NT Status Code meaning
  0xC000006A that an incorrect password was supplied.

  ===============================================
  A TCP/IP error occurred while trying to send data to the server.
  Subject 'test '.
  Server: "smtpauth.earthlink.net.
  Windows Live Mail error ID: 0x800CCC13
  Protocol: SMTP
  Port: 587
  Secure (SSL): No.
  ------------------------------------------------------------------------------------------------
  Can't send or receive messages on behalf of Earthlink. Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.
  Server response: + OK 2177 bytes
  Server: "pop.earthlink.net.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: POP3
  Port: 110
  Secure (SSL): No.
  ===============================================

  Event type: Failure Audit
  Event source: security
  Event category: opening/closing session
  Event ID: 529
  Date: 11/05/2013
  Time: 20:16:40
  User: NT AUTHORITY\SYSTEM
  Computer: MrNixon
  Description:
  Connection failure:
  Reason: Name of unknown user or bad password
  Username: I have resignation
  Domain: MrNixon
  Logon type: 2
  Logon process: Advapi
  Authentication package: negotiate
  Workstation name: MrNixon

  ====================
  Event type: Success Audit
  Event source: security
  Event category: opening/closing session
  Event ID: 528
  Date: 11/04/2013
  Time: 16:37:33
  User: MrNixon\I-resignation
  Computer: MrNixon
  Description:
  Logon successful:
  Username: I have resignation
  Domain: MrNixon
  Logon ID: (0x0, 0x106C2AFC)
  Logon type: 2
  Logon process: Advapi
  Authentication package: negotiate
  Workstation name: MrNixon
  Logon GUID: -.

  IS THERE SOMETHING VERY BAD ABOUT IT? :
  and how to fix it without making things worse?
  Workstation name: MrNixon
  Computer: MrNixon
  Domain: MrNixon
  User: MrNixon/I-resign

  PS: I can access my email on the rest of the web, so I'll see responses.

  Hi Chris,

  I suggest you to ask your question in the TechNet forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Get the bind variables name string SQL or the cursor

  Hello
  
  Is there way to get of the bind variables name string SQL or the cursor?
  
  Example of

  DECLARE
    l_sql VARCHAR2(2000);
    desctab DBMS_SQL.DESC_TAB;
    curid   PLS_INTEGER;
  BEGIN
  
    l_sql := 'SELECT * FROM emp WHERE mgr = :X and deptno = :Y';
  
    curid := dbms_sql.open_cursor;
    dbms_sql.parse(curid, l_sql, dbms_sql.NATIVE);
    ....
  END;

  What I mean with the SQL string:
  I love to get using some functions from above code variable l_sql all the bind variable.
  In this case the function should return array where is for example: X and: Y
  
  Back to bind the cursor variable names, I mean same but rather string I pass number of cursor.
  
  Y at - it sucks ready function or some may share a code customized for this purpose?
  
  Thanks
  
  Kind regards
  Jari
  
  http://dbswh.webhop.NET/dbswh/f?p=blog:Home:0Regards,
  
  Published by: jarola December 19, 2011 02:44
  
  I found there are wwv_flow_utilities.get_binds of the function not documented in APEX packages that do what I want.
  Usage example

  set serveroutput on
  DECLARE
    binds DBMS_SQL.varchar2_table;
  BEGIN
    binds := wwv_flow_utilities.get_binds('select :P1_TEST from dual');
    FOR i IN 1 .. binds.count
    LOOP
      dbms_output.put_line(binds(i));
    END LOOP;
  END;
  /
  
  anonymous block completed
  :P1_TEST

  But I would not use these functions without papers as those who can change or there is no future versions APEX.
  Is there a documented function or the custom function that do the same thing as wwv_flow_utilities.get_binds?

  Some old basic example code of my friends. Also the media getting the bind variable of PL/SQL code blocks anon.

  SQL> create or replace function GetBindVariables( statement varchar2 ) return TStrings is
    2          --// bind variables names are terminated by one the following special chars
    3          SPECIAL_CHAR    constant TStrings := TStrings(' ',')','+','-','>','<','*',',','=',';',CHR(10),CHR(13));
    4
    5          --// max size of a bind var name
    6          MAX_VARSIZE     constant integer := 100;
    7
    8          pos     integer;
    9          pos1    integer;
   10          occur   integer;
   11          varName varchar2(100);
   12          varList TStrings;
   13  begin
   14          varList := new TStrings();
   15
   16          --// looking for the 1st occurance of a bind variable
   17          occur := 1;
   18
   19          loop
   20                  pos := InStr( statement, ':', 1, occur );
   21                  exit when pos = 0;
   22
   23                  varName := SubStr( statement, pos, 100 );
   24
   25                  --// find the terminating char trailing the
   26                  --// bind variable name
   27                  pos1 := Length( varName );
   28                  for i in 1..SPECIAL_CHAR.Count
   29                  loop
   30                          pos := InStr( varName, SPECIAL_CHAR(i) ) - 1;
   31                          if (pos > 0) and (pos < pos1) then
   32                                  pos1 := pos;
   33                          end if;
   34                  end loop;
   35
   36                  --// extract the actual bind var name (without
   37                  --// colon char prefix)
   38                  varName := SubStr( varName, 2, pos1-1 );
   39
   40                  --// maintain a unique list of var names
   41                  if not varName member of varList then
   42                          varList.Extend(1);
   43                          varList( varList.Count ) := varName;
   44                  end if;
   45
   46                  --// look for the next occurance
   47                  occur := occur + 1;
   48          end loop;
   49
   50          return( varList );
   51  end;
   52  /
  
  Function created.
  
  SQL>
  SQL> select
    2          column_value as BIND_VAR
    3  from TABLE(
    4          GetBindVariables('select * from foo where col=:BIND1 and day = to_date(:B2,''yyyy/mm/dd'')')
    5  );
  
  BIND_VAR
  ------------------------------
  BIND1
  B2
  
  SQL> 
  

  PS. just realize this code is case-sensitive, while variable bind is not. Should throw a upper() or lower() by adding the name of the var to the list - never really a problem for me because I'm pretty tense when it use cases correctly in the code. ;-)

  Published by: Billy Verreynne, December 19, 2011 06:19