NAT Type help
Hello I have a router linksys wrt310n versoin 1.0 and im trying to get nat open for my ps3, I set up a static for her ip address and I've implemented portforward for the ports, I tried to put the ps3 in the DMZ and nothing works the only thing I've found to work is to reboot the router I get an open nat type , I'm getting frustrated with this router someone please help
Weird... I'm sure thay, you know what you are doing and open ports for a device is not that hard, so I still stand by the advice that is for you to get a new router. Or if you want, you can find a good router (with or without wire) and use the Wrt310n as a switch/AP.
The fact that it works for you after the reset of the router really makes me think that you encounter the same problem that I did.
Tags: Linksys Routers
Similar Questions
-
I have nat type 3 on my ps3 help
Hi im new to the Ant
I have a ps3 and I got a wrt54g2 router with: 1.0.04)is firmware which has nat type 3 and I was wondering if someone can help me set up my router nat taype 2 like a vid or something please and thank you for your support
Follow this procedure to configure your router. This procedure to set up the PS3. Follow the steps carefully. Reset the default router and configure it from scratch might help.
-
E1000 plus PS3 NAT Type 3 Help is
I know this has been asked before, but nothing seems to work for me. My story is:
I had a WRT150N with a modem in Bridge mode and had NAT Type 2 while playing the PS3. The router has crashed and I got an E1000 in its place, he came with the basic installation CD, so I ran that. Then I was getting NAT Type 3. So I called Linksys and AT & T and could not help me, we have opened the ports that Playstation has given me and made sure that UPnP is enabled and all the things they could think of my open NAT type. But nothing worked, so if anyone knows anything I could do please let me know. Its just hard to believe that its my playstaion when I got a NAT Type 2 before my old router is not crushed. I'll provide screen shots that you need, I can't bear to have this NAT type it cause messes with my online game.
Thanks for the help,
Grant
Have you set up PPPoE for the new router and switch your modem in bridge mode?
-
NETGEAR AC1900 R7000 several Xbox those open NAT Type
Hi all
What is the best solution for those multiple Xbox on the same network. I have two Xbox.
My question - get an open NAT Type on both those of Xbox. Both systems have a NAT open but not for multiplayer games. More specifically, black ops 3. I have UPnP turned on, but my black ops 3 nat type is moderate. When you look at the list of UPnP, I see a port for Xbox Live service in the list as 3074, but black ops 3 requires the port UDP 3075. At the same time, 3075 UDP has been registered for one of my Xbox and now it is no longer the case. So, what I have to do is setup port forwarding and add only my IP address of the Xbox as a personalized service with the port UDP 3075 and it works. That's fine and all, but my IP address for my Xbox (both) will not change from time to time. I thought UPnP would take care of this for me.
How should I handle this so that both those Xbox use the port UDP 3075 and I don't have to worry any change my IP? Or need to be updated for my router to Negear as Black Ops is no longer using port 3074 Xbox Live?
I'm on the last update of the firmware as of today (November 9, 2015) of V1.0.4.30_1.1.67. Yet once, I thought active UPnP would solve my problems with Xbox runing both on the same network.
Your ideas/suggestions are appreciated! Thank you for your time and help in advance!
p.s. I want to summarize... I have a NAT open for two small Xbox (if I go to the Xbox a settings/network settings tab), but I'll get one Xbox, one with an open NAT and the other with a NAT moderate when you play multiplayer on black ops 3. Treyarch said they use is no longer the same port as Xbox Live, now they use port 3075.
Hope this makes sense... Please let me know if you need more information or have any questions.
m
You can keep changing IP addresses using the address book. Log in to the R7000. Go in ADVANCED > Setup > LAN Setup. Inside will be the address reservation section. Add two entries to your Xbox.
-
does anyone know how to fix NAT TYPE failed for the PS3?
I tried to play modern warfare 3 online for the past few days, and this is the first time that I had this problem when I bought the ps3 I just signed up to the playstation network and put it in my drive of cod mw3, I didn't have to open all ports or whatever it is, I played for about a year and a few days ago I turned on my ps3 and tried to play and nothing happened so I checked my connection and everything was connected, Internet, ip, and sony all have works well but my nat type has been down for about a week now, I reset my modem several times, I have a Siemens Gigaset se567, I tried the connection cable and wireless and Sony, I opened the ports I had and DMZ on always I net type Failed. so if anyone can help me it would be greatly appreciated. Thank you
We have a separate community for Playstation products. Please click here for assistance.
If my post answered your question, please click "Accept as a Solution."
-
How to change my NAT type to 'open' _
I use a USB Connect modem to play games online. My NAT type was set to "open" for a while but now is set to "strict" and gives me only temporary access to xbox live, won't let me not join parties or let someone join my party.
Hello
Follow the steps in the article mentioned below to solve the problem.
Error: Your NAT type is set to strict (or moderate)
http://support.Microsoft.com/kb/979000/en-GBKind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
NAT Type for PS3 (wrt610N) question
I have the wrt610N cable Internet and Modern Warefare 2 play on the PS3. Since day 1, I had a Type 2 Nat type depending on the internet connection of the PS3 test. Modern Warfare 2 includes a Nat Type indicator on the lobby screen and mine said always moderate.
Well, after a little research, I forwarded my ports and hop, he says that my NAt type is open. Yesterday I accidentally unplugged the router and now my screen of the lobby still moderate. My ports are always transmitted, so I have no idea of what is happening. Any ideas?
Someone suggested that I can just go into the router and configure it to open, but it doesn't sound right. Also, I read some posts on here and noticed people mentioning something on the home network defender in the Management tab. I have no option. Someone knows why?
Port 10070 - 10080 not required for MW2, however, it is necessary for the PS3... As far as the DNS is concerned, I provided you DNS on the router, you can either use router DNS, DNS ISP or the universal DNS 208.67.222.222 and 208.67.220.220... any of them.
-
Need HELP to change the NAT type to open on Linksys E2000.
I was wondering if anyone could tell me how to change my nat from moderate to open so I can play xbox without any problems. But the strange thing is my nat was open, but it changed to moderate and I recently bought the linksys e2000 and it was open at first, but no more. If anyone can help me?
Follow the below mentioned settings, then check.
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
Let the empty user name & password use admin lowercase...
On the Configuration tab change the size of the MTU to 1365, then click on save settings...
Click the 'Administration' tab and disable the UPnP option and click on save settings...
Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
(1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
(2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
(3) click on the status tab, and then note the DNS1 and DNS2 addresses...
(4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
(5) also assign addresses DNS on Xbox
Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
(6) turn off your modem, router and Xbox... Wait a minute...
(7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...
IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box. -
I put the password in the bios but does not understand why my key board won't type help
Hi, can help them,
I put a bios password on my pc which was just okay.now when I turn on pc I can't type the password as unusable key board.I understand reading the forum there is a rider?no idea how I can find a rider that is and what I need to do to use it.Thanks for any help that may be available.Best regards, nigel.Try the steps in the atricle below
-
Hi all
I was wondering if anyone could tell me or point of me in the sense of a list of files types that illustrator can open.
I am the Manager of CAD here and prayed to find a better type of PDF file to send to the advertising agency that we use.
Any help would be much appreciated.
Kristian
File > open the drop down for the types of files as such:
-
How to get a NAT type open with a linksys E2000 on PS #.
I called customer service and they were completely clueless, told me I had to pay for support to fix it. I have a Linksys E2000 and I can not open nat for my PS3, tried DMZ, and settings of the XBox, but that obviously didn't work. If anyone has any ideas until I return this router $100?
OK, I finally got it to work, here's what I did.
On the router:
1. I booked an IP address for my X 360.
2 - passed my X 360 ports:
TCP 80
UDP 88
53, 3074
3 disabled uPnPDidn't even need to reset my router or something else. I hope this works for you guys.
-
IOS VPN with NAT need help with ACL?
What I forget? I have tried other positions, studied bugs known with 12.2 (13) T1, etc. workaround solutions, but perhaps my other choice of configuration interfere with my VPN configuration.
I can connect, authenticate locally, very well. Stats of Cisco VPN client 3.6.3 show I'm Encrypting traffic on the protected networks, but I can not all traffic through internal hosts once I've connected.
I removed security tags and replaced all the public IP addresses to fake in hope that someone can point me to what is obvious!
Thank you very much.
----------
Current configuration: 5508 bytes
!
! 22:24:38 PST configuration was last modified Thursday February 20, 2003 by kevin
!
version 12.2
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
AAA new-model
!
AAA authentication login userauthen local
AAA authorization groupauthor LAN
AAA - the id of the joint session
IP subnet zero
!
IP domain name mondomaine.fr
name of the IP-server 199.13.28.12
name of the IP-server 199.13.29.12
!
IP inspect the audit trail
IP inspect high 1100 max-incomplete
IP inspect a high minute 1100
inspect the tcp IP Ethernet_0_1 name
inspect the IP udp Ethernet_0_1 name
inspect the IP name Ethernet_0_1 cuseeme
inspect the IP name Ethernet_0_1 ftp
inspect the IP h323 Ethernet_0_1 name
inspect the IP rcmd Ethernet_0_1 name
inspect the IP name Ethernet_0_1 realaudio
inspect the IP name smtp Ethernet_0_1
inspect the name Ethernet_0_1 streamworks IP
inspect the name Ethernet_0_1 vdolive IP
inspect the IP name Ethernet_0_1 sqlnet
inspect the name Ethernet_0_1 tftp IP
inspect the IP name Ethernet_0_1 http java-list 99
inspect the name Ethernet_0_1 rtsp IP
inspect the IP name Ethernet_0_1 netshow
inspect the tcp IP Ethernet_0_0 name
inspect the IP name Ethernet_0_0 ftp
inspect the IP udp Ethernet_0_0 name
audit of IP notify Journal
Max-events of po verification IP 100
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
ISAKMP crypto nat keepalive 20
!
ISAKMP crypto client configuration group vpngroup
xxxxxxxxx key
DNS 199.13.28.12 199.13.29.12
domain mydomain.com
pool vpnpool
ACL 110
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
!
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
MTA receive maximum-recipients 0
!
!
interface Ethernet0/0
Description connected to the Internet
IP 199.201.44.198 255.255.255.248
IP access-group 101 in
NAT outside IP
inspect the IP Ethernet_0_0 in
no ip route cache
no ip mroute-cache
Half duplex
clientmap card crypto
!
interface Serial0/0
no ip address
Shutdown
!
interface Ethernet0/1
Connected to the private description
IP 192.168.1.254 255.255.255.0
IP access-group 100 to
IP nat inside
inspect the IP Ethernet_0_1 in
Half duplex
!
IP local pool vpnpool 192.168.2.201 192.168.2.210
period of translation nat IP 119
!!
!! -removed the following line for VPN configuration
!! IP nat inside source list 1 interface Ethernet0/0 overload
!! -replaced by the next line...
IP nat inside source map route sheep interface Ethernet0/0 overload
IP nat inside source 192.168.1.1 static 199.201.44.197
IP classless
IP route 0.0.0.0 0.0.0.0 199.201.44.193 permanent
IP http server
7 class IP http access
local IP http authentication
!
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 5 permit 192.5.41.40
access-list 5 permit 192.5.41.41
access-list 5 refuse any
access-list 7 permit 192.168.1.0 0.0.0.255
access-list 7 refuse any
access-list 99 refuse any
access-list 100 permit udp any eq rip all rip eq
access-list 100 permit tcp 192.168.1.1 host any eq www
access-list 100 permit ip 192.168.1.1 host everything
access list 100 permit tcp host 192.168.1.2 any eq www
access-list 100 permit ip 192.168.1.2 host everything
access-list 100 deny ip 192.168.1.253 host everything
access ip-list 100 permit a whole
access-list 101 deny host ip 199.201.44.197 all
access-list 101 permit tcp any host 199.201.44.197 eq 22
access-list 101 permit tcp any host 199.201.44.197 eq www
access-list 101 permit tcp any host 199.201.44.197 eq 115
access-list 101 permit icmp any host 199.201.44.197
access list 101 ip allow any host 199.201.44.198
access-list 101 permit tcp any host 199.201.44.197 eq 8000
access-list 101 permit tcp any host 199.201.44.197 eq 8080
access-list 101 permit tcp any host 199.201.44.197 eq 9090
access-list 101 permit udp any host 199.201.44.197 eq 7070
access-list 101 permit udp any host 199.201.44.197 eq 554
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access-list 115 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 115 permit ip 192.168.1.0 0.0.0.255 any
!
sheep allowed 10 route map
corresponds to the IP 115
!
Line con 0
exec-timeout 0 0
password 7 XXXXXXXXXXXXXXX
line to 0
line vty 0 4
password 7 XXXXXXXXXXXXXXXX
!
NTP-period clock 17208655
source NTP Ethernet0/0
peer NTP access-Group 5
NTP 7 use only group-access
NTP master 3
NTP 192.5.41.41 Server
NTP 192.5.41.40 Server
!
end
----------
Config looks OK, you should be able to get for each internal host EXCEPT 192.168.1.1 with this configuration. If you do a ' sho cry ipsec his 'you see Pkts Decaps increment, indicating that you see the traffic of the remote client? " Do you not see Pkts Encaps increment, indicating that you send a response réécrirait the client to the internal host.
For what is 192.168.1.1, because you have this:
> ip nat inside source 192.168.1.1 static 199.201.44.197
It substitutes for this:
> ip nat inside source map route sheep interface Ethernet0/0 overload
for this host traffic only and therefore back for just this host is always NAT would have even if you don't want it to be. To work around to send traffic to this host through an interface of closure with no NAT enabled on it, that it is NAT would have stops and allows you to connect via VPN. You can see http://www.cisco.com/warp/public/707/static.html for a detailed explanation, but basically, we must add this:
loopback interface 0
IP 1.1.1.1 255.255.255.0
interface ethernet0/1
Static IP policy route map
permissible static route map 10
match address 120
set ip next-hop 1.1.1.2
access-list 120 allow host ip 192.168.1.1 192.168.2.0 0.0.0.255
-
I need someone to take a second look at this code for me
This is the code that is setting up the error type of debugging
more wide = (textArray [p] .width > widest)? textArray.width:widest;
Here's all the code, I have the code broken in bold. TextArray and Im wondering whats causing the mistake of larger type are found.
makes the electric text
Stop();
MovieClip (parent.parent).inputTxt.text = "";
var bNumms:Number = 1;
var myFormat:TextFormat = new TextFormat();
myFormat.size = 25;
myFormat.font = solid "LCD."
var blockStuffN = .ep MovieClip (parent.parent);
trace (MovieClip (parent.parent). E2);
var blockArr:Array = new Array ("b1", "b2", "b3", "b4", "b5", "b6", "b7", "b8", "b9", "b10", "b11", "b12", "b13", "b14", "b15", "b16", "b17", "b18", "b19", "b20", "b21", "b22", "b23", "b24", "b25", "b26", "b27", "b28", "b29", "b30", "b31", "b32", "b33", "b34", "b35", "b36", "b37", "b38", "b39", "b40", "b41", "b42", "b43", "b44", "b45", "b46", "b47", "b48", "b49", "b50", "b51", "b52", "b53", "b54", "b55", "b56" , 'b57', 'b58', 'b59. "
"b60", "b61", "b62", "b63", "b64", "b65", "b66", "b67", "b68", "b69", "b70", "b71", "b72", "b73", "b74", "b75", 'b76', 'b77', "b78", "b79", "b80", "b81", 'b 82', "b83", "b84", "b85", "b86", "b87", 'b88', "b89", "b90", "b91", 'b92', "b93", "b94", "b95", "b96", "b97", "b98", "b99");
var textArray:Array = new Array();
for (var p:int = 0; p < blockStuffN; ++ p)
{
[blockArr [p]] textArray = new TextField();
textArray [blockArr [p]] .name = blockArr [p];
textArray [blockArr [p]] .x = 75;
[blockArr [p]] textArray there = p * 30;
textArray [blockArr [p]] .width = 50;
[blockArr [p]] textArray .Guy = TextFieldType.INPUT;
textArray [blockArr [p]] .height = 80;
textArray background [blockArr [p]] = true;
textArray [blockArr [p]] .backgroundColor = 0x86A798;
textArray [blockArr [p]] .border = true;
textArray [blockArr [p]] .defaultTextFormat = myFormat;
textArray [blockArr [p]] .autoSize = TextFieldAutoSize.LEFT;
addChild (textArray [blockArr [p]]);
}
MovieClip (parent.parent) .textSelect = ['b1'] textArray;
MovieClip (parent).edown1.addEventListener (MouseEvent.CLICK, downBlockBut, false, 0, true);
function downBlockBut(event:MouseEvent):void
{
If (blockStuffN > bNumms)
{
bNumms += 1;
MovieClip (parent.parent) .textSelect = textArray ['b' + bNumms];
This.y-= 30;
trace (bNumms);
}
}
MovieClip (parent).eup1.addEventListener (MouseEvent.CLICK, upScrollBut, false, 0, true);
function upScrollBut(event:MouseEvent):void
{
If (bNumms > 1)
{
bNumms-= 1;
MovieClip (parent.parent) .textSelect = textArray ['b' + bNumms];
This.y = 30;
trace (bNumms);
}
}
border adjust
more wide var: number = 0;
for (var i = 0; i < MovieClip (parent.parent).lettersSmall.length; i ++)
{
MovieClip (parent.parent) ["key_" + MovieClip (parent.parent).lettersSmall.charAt (i)] .addEventListener (width MouseEvent.MOUSE_UP, ajW);
}
function ajWidth(event:MouseEvent):void
{
trace (textArray.Length);
for (var i: int = 0; i < = textArray.length; i ++)
{
more wide = (textArray [p] .width > widest)? textArray.width:widest;
}
for (i = 0; i < textArray.length; i ++)
{
textArray [p] .width = wider;
}
}
You must always include the complete error message in your messages.
Meanwhile... the problem may lie in everything what
textArray.width
is on the line.
Must it be
textArray [p] .width
as in
more wide = (textArray [p] .width > larger)? textArray [p] .width: broader;
-
Adobe AfterEffects CS5 kinetic type Help
Hey guys,.
I worked on this project for a good few days now and there are a few minutes, he did it for no reason that I can understand. I have nothing seems to be set. Any ideas would be very appreciated. Cases where there is no confusion, the issue is that I can see is more of my animation film, all I can see are these lines of sandstone on the center of the window during the entire room.
Thank you
Versa
You are in the top view. Switch to the Active camera.
Mylenium
-
How can I change my NAT type 3?
I messed around on my secondary router and I googled a bunch with no luck saw the most people want to help change the 3 to 2.
I know, I know, why would I want to change my NAT type 3? reasons lol
can someone help me? My routers are connected LAN to LAN, I have a Linksys EA4500 as a secondary router, the main router I want to stay type 2 so that my efforts do not interfere with my brothers games.
I finally, I plugged the 2 first routers Lan to Lan and the third I hung LAN to Wan, problem solved
Maybe you are looking for
-
Notes on the iPhone (iCloud) synchronize with the iMac
I enter notes in my iphone (ios 9.3.5) 6s and they don't synchronize with my imac (OS 10.10.5). Syncing seems to have stopped sometimes last month, but can't think of anything that is changed. How can I do start sync again. Meanwhile, Notes, which al
-
How can I import from Outlook 2007 when the option is grayed out?
I'm moving from Outlook 2007 to Thunderbird. All is well until now, but I need to import my old mails from Outlook. When I go to tools > import > Mail I get options for Eudora, Outlook, and Outlook Express. Eudora and Outlook options are grayed out.
-
I had my email "[email protected]" pirate. I deleted the email address on the ISP e-mail server and created a new email "[email protected]" - without the H immediately after John.Thunderbird, I added the new email address (see table).H
-
also, disabled addons. See above. On win7. IE and google earth normal run. Abandoned, using IE for a month. On another PC so site reads the wrong plugins.
-
Have questions about overall upward of Outlook Express.
I reason that, unlike Hotmail/Yahoo, etc., Outlook Express needs a Hotmail/Yahoo e-mail account must be configured before can connect you to Outlook Express? An 'Outlook Express' e-mail account can be created with the outlook.com extension or the mai