Navigation in Explorer problem

Similar Questions

• Internet Explorer problems with Web site

  We have problems with our site Web display correctly in older versions of Internet Explorer. It seems fine in the newer versions and other web browsers, but in Internet Explorer its is not centered and the information is sent down below the navigation. The site is www.wctractor.com for help or answers are greatly appreciated.

  The first lines of the document shows

  http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

  Internet Explore hate having to look down the document to highlight lines, spits the dummy and goes into Quirks Mode (i.e. a mode before IE5).

  Remove the

  http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

  bit and place the following on the first two lines of the document

  IE will be a very happy chappy after that.

• Equium P200D - Vista Internet Explorer problem

  I am facing a problem with Internet Explore.

  When the search and access to a Web site I get a message box Windows telling me that there is a problem and Explorer closes down,

  There is a 'details' option that gives me the following information: -.

  Problem event name: BEX
  Application name: iexplore.exe
  Application version: 8.0.6001.18702
  Application timestamp: 49b3ad2e
  Fault Module name: NPIEAddOn.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4a55c8ba
  Exception offset: 100036d 0
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057
  Additional information 1: fd00
  More information 2: ea6f5fe8924aaa756324d57f87834160
  Additional information 3: fd00
  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  In addition, I don't know if there is a related problem, I get unsolicited sites that suddenly appears in a new window.

  I am a Silver Surfer, not at all HiTec so any help to solve my problem must be of a type of time line!

  Thank you in anticipation

  mikstan

  HI mikstan,

  The best way to surf the internet safely is to use MOZILLA FIREFOX.

  Leave internet Explorer such what. Download and install the MOZILLA FIREFOX browser. His high secure browser.

  Concerning
  Hafida

• Police in the Project Explorer problem

  I'm under LabVIEW 2013 SP1 and I just installed DAQmx 9.8. After installation, it seems that something has changed with my fonts throughout LabVIEW. Fonts keep intersect or cropped. This applies to everything from the start screen, in the Project Explorer to some of my VI font sizes. I went and checked my settings 'System of the police' and 'Application' but does not seem to solve the problem. See the attached picture

  He ended by referring to the display settings of Windows 7. For example do a right-click on the desktop, select Personalize, and then select "display". The window scaling system at Large and I had to change in the medium.

  Perhaps, I got a quick access key when installing DaqMX. Very strange, but now its fixed.

• Internet Explorer problems

  My internet explore continues to stop and I get an error message that says: the 0x029669e0 referenced memory. the memory could not be written. How can I solve this problem?

  You can reset Internet Explorer. Control Panel, Optionn Internet, Advanced tab, click Reset.

• Windows Explorer problem

  http://img185.imageshack.us/img185/9760/windowserror1.PNG
  http://img24.imageshack.us/img24/4975/windowserror2.PNG
  Whenever I do a right-click on the icon on my desktop or start bar I get a Windows Explorer has encountered a problem and needs to close. I don't know if it's Virus problem but I scanned my computer with Bit defender and the problem was still there.

  Failing application explorer.exe, version 6.0.2900.3156, failed module unknown, version 0.0.0.0, failure address 0x00000000.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 65 78 70 exp ure
  0018: 6 c 6f 72 65 72 2 65 78 lorer.ex
  0020: 65 20 36 2 2 30 32 39 e 6.0.29
  0028:30 30 2 33 31 35 36 20 00.3156
  0030: 69 6 20 6 6 75B 6F 6f exercise
  0038: 77 6f 20 30 2e 30 2e 30 wn 0.0.0
  0040: 2 30 20 61 74 20 6f 66.0 to of
  0048: 66 73 65 74 20 30 30 30 000 fset
  0050: 30 30 30 30 30 0 a 00000 0D...

  ImSoConfused,
  Have you tried booting in safe mode and test this problem?  If this isn't the case, I would try the safe mode and then try a clean boot.  Here are the links the performance of these two startup options.

  Safe mode: http://support.microsoft.com/kb/315222

  Clean boot: http://support.microsoft.com/kb/310353

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Freezing of Windows Explorer (problem event name: AppHangB1 application name: Explorer.EXE)

  my laptop freeze everytime I try to copy files from one disk to another, and here is the problem report

  Problem event name: AppHangB1

  Application name: Explorer.EXE

  Application version: 6.0.6002.18005

  Application timestamp: 49e01da5

  Hang Signature: e36f

  Hang the Type: 4

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Signing of additional blocking 1: 84a74b2e2362b73156ffd8ce815ab7de

  Signature of blocking additional 2:0433

  Signing of additional blocking 3: 7ac408085f85bc7b4993b6de39385374

  Signing of additional blocking 4: ef2c

  Signing of additional blocking 5: 7192d5cf15e616a12e2e559236f7057d

  Signing of additional blocking 6: a5d3

  Signing of additional blocking 7: 9338adb319feac4f0ba33134abc2bfbc

   

  Original title: problem event name: AppHangB1 application name: Explorer.EXE

  Hello

  1 did you change on your computer before this problem?

  2. this problem occur when copying all the files?

  3. you try to copy files to an external drive?

  You can check if the problem exists in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  (For Windows Vista)

• Access to Windows Explorer problem

  I have Windows Vista and yesterday after downloading a text file of my bank on my computer, I have been unable to launch Windows Explorer or my control panel, etc.  I access programs such as Excel and access files via Excel.  I get the error message is "Windows Explorer has stopped working".

  Hello

  I suggest you to try the steps below and check if they help to resolve the issue.

  Step 1:

  Try to start your system in safe mode and check if you are able to open Windows Explorer without any problem.

  To start in safe mode, see the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  If you can able to open Windows Explorer in safemode, I suggest that you perform a clean boot in normal mode and check if the problem persists.

  Follow the steps mentioned in the article below.

  How to configure Windows Vista to start in a "clean boot":

  http://support.Microsoft.com/kb/929135

  Note:

  Once the troubleshooting completed, reset the computer to start as usual.

  Hope this information is useful.

• Allowing the sounds of navigation in Explorer file Win 8

  How to activate navigation sounds in the file Explorer Win 8?

  Hi Sergei,

  Refer to the following steps and check if you get sound when you browse in Windows Explorer.

  a. press the Windows key + W and type system sounds. The search results, click change system sounds option.

  b. then, sound configuration window will be pop up and on the sounds tab, find the File Explorer > Start Navigation event inside the list of events of the program. Finally, you will see that there not its attached to it. Just find the Start.wav of Navigation of Windows in the drop-down list sounds, click on apply, then OK.

  I hope that helps!

• Preview in Internet Explorer problem

  If I was building a Web site using CS6. So far so good, but problems arise when I preview the.

  The site is exactly what I wanted to Dremaweaver Live View and Google Chrome. But in Internet Explorer, there are a few problems;

  (these problems do not occur at the same time, they occur in a different version of Windows, but using IE)

  1 the bottom of the Web page is not fully displayed. There should be a < div > footer that can be seen in Live View and Chrome, but not in Internet Explorer. It seems that you print something and it just stopped at halfway.

  2 in my Web page, there is a flight path images that light up when your mouse moves over them. A border appears around the image in Internet Explorer, but not in Live View or Chrome.

  Any help is very appreciated. Thank you

  It turns out that my parents had set the text size in Internet Explorer at the 'bigger' as a result of the footer

  cannot be seen. Once changed back to 'Medium' footer

  is visible again. So the first case is resolved, but still thank you for the advice given.

  Just be aware that others besides your parents will also want to use the largest value. If your layout of the site stops when this setting is selected, then you might want to reconsider the layout. Increase the size of the text by a tick in Safari on my Mac causes the footer to drop below the lower part of the screen without a scroll bar.

  I suspect you can do two things to eliminate this problem:

  1. remove the overflow: hidden style (why do you use that?)

  2 remote control style max-height (why do you use that?)

  Two of these styles are applied to the div #container.

• Internet Explorer problems in the new site and product views

  Well, I'm stumped.

  We just launched a redesign of a site (www.geniefilters.com) and I am getting a strange vision of our product catalogue displaying in Internet Explorer on a PC. (The site was created on a Mac, with a site of BC model).

  Products display in 3 columns, but in IE, only the left column shows... and no, the elements are not forced down in a single line. Show only products that would normally appear in this column. Article 1, point 4, 7, 10, etc...

  The catalog was created in module purchases in Colombia-British models and seems very well seen on a Mac. It works as well on a PC, using Google Chrome or Firefox.

  I couldn't someone else to watch the pages and let me know if they identify a problem? Or is there a problem with IE, that I'm not aware?

  Thanks in advance,

  Chuck

  Hello

  The use of the debugger in IE9, stop table.productTable td {width: 100 %} in ModuleStyleSheets.css makes appear them - IE is not allowing you to have 3 columns of the table at width of 100%.}

  Hope that helps.

  Steve

• Navigation of exploration down

  Hello
  
  I have a pivot table this drill down 5 points. The last level is ID, I want to the latter a link with another report, passing it the ID as a parameter.
  
  The field ID is not drawn in the report items, but the hierarchy is defined and is currently the last level. I tried to connect it with another report from target, but it does not work.
  I pulled in the field ID in the criteria and hid the field as a column, interaction value I put this link to the target report. In the target report, I put the field that ID is guest.
  
  Can anyone help?
  
  Thank you

  The way navigation works is that you generate the report of higher level with all columns, the user wants to see. On the column that you have built for forest down, market, use the value Interaction > Navigation to go to the next level report. This 'next level report' you will also need to establish with all columns, you want to see and the market column. When the user clicks on a value in the columln market in the high-level report, it would take the next report level which has information Sales Person and a filter "is invited" on the market column. You continue this until whatever level of detail is necessary and then to the bottom most related, you can have a navigation from this report for a completely different report if you wish.

  You would not use the hierarchy of exploration down to this report, once again, because you have the criteria for the lowest level, by clicking on a value to take the user to a completely different report. When you use forest down, we must define the hierarchy in the MDB layer and once built, it's the forest down. You cannot 'customize '.

• Internet Explorer problem

  Hello
  
  I'm trying to access the workspace through Internet Explorer.
  The problem is that I can't see the applications in the Explorer > Applications > planning.
  
  I see the list that has the same user on Firefox.
  
  V planning 11.1.1.3
  Internet Explorer 7.0.5730.13
  
  Thank you for your help
  
  Cedric

  Have you tried

  * Go to Tools / Internet Options / Security / select a Zone / Custom level / Misc
  * Select "allow windows initiated by scripts without size or position constraints".

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Internet Explorer problems with secure endpoint AMF

  Everyone ran into problems with Internet Explorer using (https) secure AMF channel endpoint?
  
  I'm calling a ColdFusion via RemoteObject in Flex component via AMF channel set with a prefixed by https endpoint. It works very well with FireFox but fails with Internet Explorer. Internet Explorer works fine if I use the same end point just ordinary http prefix.
  
  I read that you need to add < add-no-cache-headers > false < / add-no-cache-headers > services - config.xml, but even after that it doesn't always on channel secure.
  
  Any ideas?
  
  
  
  

  There are a few things you can try. Take a look at http://weblogs.macromedia.com/lin/archives/2006/08/flex_app_works.cfm

  Thank you
  Gerard

• BI Internet Explorer problem.

  Hi, I look around the forum, but I can't find a definitive answer to the solution of my problem. When I use internet explore to connect to BI I am able to connect, but when I click on something else the login screen comes out again. This happens only in IE but not firefox. BTW, I have install oracle BI in win 2003 environment. The thing is I have install in my laptop using Windows XP and I use IE, he did this. Any idea? THX

  Problem is the computer name in the url. Replace the IP address. For example: http://my_computer/analytics-> http://10.200.230.1/analytics.