NB100-11R - WiFi modem disappeared

Similar Questions

• How to get NB100-11R automatically connect to the WLan on logon

  I just bought a netbook NB100-11R.
  First time that I started it, I went into the network administration panel to set up a wifi access.
  She had detected my wireless network, so I entered the WPA password and it connected correctly. I saved these parameters such as a network location.

  Next time I started than I expected it would he remember these parameters and automatically connect, but I could not get web access.
  Looking at the network admin, this sill has my network listed as the wireless connection, but I had to unlock the Control Panel, select my site again and click on the button 'apply the location as the current configuration', before he would give me a web access, I have to do it every time I start, which will become irritating.

  Is it possible to get to connect automatically when I start?

  What operating system do you use?

  Have you updated the Firmware wireless access point?

• Communication by internet WiFi modem with wireless router

  I have a WIFI modem by the internet provider. My office is on the other side of the House where there is no internet signal.  Is it possible to get a WiFi router that reads the WiFi signal, which will be the Ethernet Ports, could I link all my computers over printers on the network? If TI available what is the manufactured by. The router will make the fall speed, right now I have a download speed of 350Mbs/s?

  Thank you

  You need to move the router closer to your office or buy a wi - fi Extender and place it in between the router and the desktop.

• Airport Apple Time Capsule vs Rogers Advanced WiFi Modem Configuration

  Between the use of the advanced WiFi modem from Rogers and airport Time Capsule from Apple - a better/more strong WiFi signal will offer?

  I'm under Apple Airport time Caro as my router now (with Rogers Advanced WiFi modem mode 'bridge').    However - my WiFi connection is weak/inconsistent even after adding 1 Airport Express to extend the network.    My Modem/router are connected with a 2 foot Cat6 my ground floor, with the Airport Express on the floor to extend the reach (via WiFi - not the ethernet connection).

  When I reset my router/modem, get full power - however, after a couple days I get slower speeds.

  Any ideas how to fix?  Users are finding you work better than the other?

  Between the use of the advanced WiFi modem from Rogers and airport Time Capsule from Apple - a better/more strong WiFi signal will offer?

  Turn on the Rogers modem in router mode and launch his wifi... Plug the TC and run it in bridge, but also launch wireless audio... There is absolutely NO reason not to use both... You will often find the 2.4 ghz superior to the airport the Rogers Wireless. Apple has deliberately reduced its speed... If you need set channels wireless manual... for example of Rogers on the TC on Channel 6 and channel 11.

  5 GHz has penetration and poor range, especially when you look at the wireless signal directly above or below any router... It is of course extremely beneficial to use ethernet between the floors... Run the Rogers down and move the TC on the floor... that gives you much better signal allows you to get the most out of two wireless routers.

  Extend (Repeater) wireless using the Express will condemn you slow wireless forever. Repeaters by their nature even halve the speed of the connection... and if you place the Express in a poor signal area... getting worse. Express should be located to midway between the two... no physical distance but the power of the signal... If it gets bad signal, it will give terrible results since its own signal will be strong for customers.

  Test it... give up the Express... run ethernet to the top of the stairs and just try it with the TC to the right place.

• NB100-11R - screen says "BusyBox" on start up

  Have had my Toshiba NB100-11R of the Comet for 2 days and worked very well :)

  But... When I went to turn it on this morning the screen loadup (Ubuntu) did nothing and it went to a screen that says "BusyBox v1.1.3 (Debian 1:1.1.3 - 5ubuntu12) built-in shell (ash) Enter 'help' for a list of built-in commands."
  What should I do? And why has it happened?

  Chdir command controls are: Alias break cd continue echo eval exec exit export getopts fake hash let local pwd read both return shift set readonly trap umask unalias unset wait true type ulimit [[[ash awk basename busybox chmod chroot chvt cat clear cmp cp cut deallocvt dumpkmap echo egrep env expr fbset false fdflush fgrep grep ifconfig ip hostname kill in loadfont loadkmap ls mkdir mkfifo mknod mktemp mkswap more mount mv openvt pidof printf ps]]] pwd readlink rm rmdir sed setkeycodes sh Reset sleep test tri sync stat tail tee touch tr true ATS umount uname uniq wget Yes

  I don't have any idea what any of these commands and am new to the system ubuntu, so if anyone can give me step by step instructions on what to do that would be! And would really appreciate

  Cheers :(

  Anyone have any ideas? :(

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• WiFi does not work after resrtating wifi modem

  Hi HP
  
  I 4540 probook s basic model.i have a big problem:
  
  When the electricity goes on and on, computer laptop mi can't find WiFi modem.
  
  I have change my asus modem, D-link, TP-link 3 times.
  
  I have this problem and I re - install wireless driver.
  
  I have re-boot modem.2 time problem solved, but other times not.
  
  another, my family, that the use of WiFi have no problem.they have asus.
  
  Please help me.
  
  THANK U.

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
  PCI\VEN_1814 & DEV_3290 & CC_028000
  PCI\VEN_1814 & DEV_3290 & CC_0280

  should which driver I download?

• NB100-11R: Wlan Authentication has no problem with Ubuntu installed

  On my Toshiba NB 100 - 11R, Ubuntu is installed.
  Ideally, I would like to browse the Internet and clicked on network connections.
  All fields were dark and the click of a button down came the following error message:
  Authentication failed!

  What can I do?
  I had turned on the modem wireless and also in my laptop.

  If no one can help you here try to ask for help on some Ubunty forum.
  I hope that you will be able to find the solution so be nice and post it here.

  This info can be useful for other owners of Toshiba laptops and Ubuntu users.

• Currently have what benefits will provide an Airport Extreme wifi modem service the Fios last?

  I have FIOS at home and bought their last fastest modem.

  I have some "weak points" around the House for the wifi connection.

  If I add the Airport extreme it can solve this?

  If I add the Airport extreme it can solve this?

  Yes, if you are looking for an AirPort Extreme in the middle of an area that needs more wireless coverage. The downside of this is that the AirPort Extreme needs to connect to FIOS modem/router with wired Ethernet wired, permanent.

  Unfortunately, if you have two different general areas where you need more wireless coverage, then you will need two extremes of the airport, one per domain. Two airports must connect to FIOS modem/router using a wired Ethernet cable connection.

  You can do better to find an "extension" or "repeater" that would be compatible with the modem/FIOS router and connect using wireless, rather than wired, which would require an Apple AirPort base station.

  Check to see if they produced with the support of FIOS available to do this, or could recommend a compatible product for you.

• With Ubuntu - wellcome very slow when screen Toshiba NB100 no wifi access

  Hello
  I am a new user of ubuntu on nb100 and I have a problem when there is no wifi connection:

  Wellcome Toshiba ubuntu with every choice menu (games, administration, internet...) work very quickly when WiFi is okay and on and if you are in other cases, it works very, very slowly.

  Other cases, it means:
  -ubuntu stop you lan connections,
  - or are you somewhere without wifi connections

  If you have already loaded programs that that program working normally, it is only the menu toshiba ubuntu that does not work properly. When you share a program to the Ubuntu menu, sometimes, you have a blank screen instead of work well

  I hope someone can help me

  Thank you.
  Michel

  Post edited by: mmo91

  module:

  This problem occurs when you use the menu of ubuntu GUI written by toshiba, I think, because if you use ALT - F1, everything goes fast.

  Hello!

  It is a known issue on Windows systems. If you n t use the WLAN and connect to the local network and you have active DHCP it will takes a lot of time on start up because the operating system tries to get an IP address from the DHCP server.

  Try to assign a static IP address, and the problem should be solved.

  Good bye

• Problem with smart updates using the WiFi, modem OK

  I started having problems with my WiFi on my Toshiba Satellite laptop.

  I can not access any program Smart Update - Windows, Norton, Spydoctor, inheritance etc..

  These Smart Update programs work very well if I'm connected to Dial-up but not wireless.

  I checked my Norton Firewall settings - doesn't seem to be an indication of a problem here.
  I disabled my firewall program - no change.
  I tried the drivers updated - no change.
  I uninstalled the other software spy/advertising programs and checked my registry - no change.

  My Internet is fine - I can always check email and browse websites - just the Smart Update function seems to be affected.

  I am running Vista and have updated and installed all the files system through my modem connection. I use Norton 360.

  Any suggestions?

  Concerning

  Lisa

  Hello

  The wireless internet connection seems to be ok if you can access the Web sites.
  So I think that the problem must be installed software or application.

  You use Norton 360?
  Although I know this software could affect the internet connection.
  See this Symantec support page:
  http://www.Symantec.com/Norton/support/selectproduct_ts.jsp

  There are some frequently asked questions about various issues with Vista, and Norton 360.

• NB100-12N, 3G modem does not work after hibernate

  My computer is a NB 100 - 12N with Windows XP Home SP3. It is equipped with an internal modem to 3G, Modem Broadband Mobile F3507g from Toshiba.

  When the computer is started, Wireless Manager 5 starts and automatically connect to the internet through 3G modem. However, if the computer switches to hibernation Wireless Manager gives the error message "no modem mobile broadband not connected" (freely translated from Swedish as I have Swedish version). I can't find anyway to get it back except reboot the computer from scratch.

  The computer is also equipped with WIFI and as I suspected a collision between two network systems I tried to disable the WIFI network. This did not make a difference however.

  Suggestions anyone? I hope you can help because using a laptop (in effect) without hibernation is quite annoying...

  Sara

  It also not help to close the Wireless Manager and reopen it again.
  If this does not help, have you updated to the latest FW, driver manager and wireless?

• WiFi network disappeared after that WPS button was pushed

  I was asked to press the WPS button on my router to connect my wireless printer. The printer installation has been completed successfully, but now when I go on my phone or laptop, my network name disappeared. Initially I thooght maybe just the name had been changed and tried among other networks that have been detected but my password does not work on any. How can I get my network to be recognized by my devices again? Internet on my PC works well because it has a direct connection to a modem.

  Hi @bee_gee

  Welcome to the community!

  You could have pushed as well the wireless button.

  See if it happens when you press the button again without wire on the side.

• HP 15-ac152sa laptop: wifi tab disappears from the network settings menu. Unable to connect to wifi

  I bought a new laptop. I connected to the WiFi network with no problems the first time. I have downloaded Microsoft office 2016 (home and student). The next time I turned on the laptop, the icon WiFi in the corner of the screen says "no connection available.

  On the tab "network and internet". There is no tab for WiFi. Initially, I managed to fix it by clicking on the 'network card', 'properties' and on the 'power management' tab, I unchecked the box indicating "allow the computer to turn off this device to save power. This fixed the problem... until the next time I turned on the laptop. It's the same thing and I am unable to connect to internet via WiFi.

  The single adapter in the list here is "Realtek PCI-e FE family controller #2". Still unable to connect to WiFi... Still no WiFi tab under settings "network and internet". Help, please!

  So, the problem was finally solved (fingers crossed!).

  Yes, the Internet access worked perfectly every time when it is connected through the Ethernet cable. Ultimately I phoned the helpline. They checked for the new driver updates (these have been already updated), restored the BIOS remotely and then restored the device to the factory settings. Start of the fault still took place intermittently. This indicates a hardware problem, and the unit was sent for repair.

  The idea was that when the WiFi did not work, the WiFi card wasn't physically visiable in the list of available adapters, nor has the Bluetooth adapter. Apparently in this device, the Bluetooth and WiFi functions are on the same network adapter and apparently those elements should not disappear from the list of available adapters. So the fact that they disappeared together intermittently indicated a hardware problem with the card.

  Now that I got my laptop back and I think that the WiFicard has been replaced. Hoping all is well now and I hope this post helps someone else.

  Thanks hp for fast and wonderful customer service.

  Sarah

• Call blackBerry Smartphones Wifi icon disappeared

  I have a Bold 9900 and had wifi calls (voice of BBM) installed and working for months. Recently, my voice BBM icon has disappeared. How can I reinstall? I have to delete BBM and install again?

  Hello Mac and welcome to the community of BlackBerry Support Forums.

  Sorry to hear that you are having a problem with BBM.

  Under Options > device > application management, which is the Version listed BBM?

  When you go to www.blackberry.com/bbm on your device browser and go into install BBM, do you have a prompt to replace the same version or install a new one?

  Thank you!