NB200-10Z connection external monitor problems

Similar Questions

• External monitor problem

  Let me start by saying that I had this work once.  Here is what happened.  I was watching Netflix on my laptop using my flat screen tv as a monitor. The monitor of the laptop was also.  When the video started to freeze intermittently, I thought that I might be able to decrease the load on the computer using only the tv for the monitor, but I couldn't find the dialog box to change the selection (please don't tell me where it is, I found it since.)  (Read more).  My son suggested by pressing Fn + F5.  The icon seemed sensitive so I tried.  I lost the image on my screen laptop and become blurred the image of the TV.  I pressed the keys again hoping to get back to what I had before, but it didn't work.

  Here is where I am now.  The laptop is fine as long as I do not connect the VGA cord.  As soon as I plug the VGA cord, the laptop monitor goes black.  The TV screen reads "signal not supported."

  Here is what I tried:

  Tested by VGA cable and laptop on another TV; This works.
  Tested another computer on the tv problem. This works.
  Changed my resolution of the laptop must match that on the other computer that worked: no change
  Found original (while connected to other tv) dialog box and check the mirror on the second monitor *: no change
  Looked in device under monitors for television Manager, hoping to remove it and start again, but it is not listed

  Oh and Yes, I have power all recycled several times and enabled their return in every possible order.

  My thoughts - Windows says that the info for each monitor is stored so that when you reconnect to it, the same settings are applied.  I think maybe somehow I need to purge these parameters or return to the default value. I can't understand how to do this.

  * I just can't reach this dialog box without a connected external monitor, and as soon as I connect the tv, that I am using, my laptop screen goes black, so I can't change this setting when you are connected to the tv I want to use.

  Connect and scroll with your hotkeys again.  These keys are distinguished by the laptop.

  Install the most recent/most great driver and software from the video device manufacturer (which is Microsoft.)  Likely to Intel, nVidia or ATI (AMD).

• Shift the image with connected external monitor

  Hi all.

  My old external monitor just called it a day, so I bought a new. A U28D590 of Samsung 4 k. pretty lousy video quality compared to my old, but I can live with, I got it for next to nothing.

  The big problem is the poor 'speed of feeling. " mouse cursor movement is undoubtedly lag compared to the internal screen (I use the copying video, so I can compare the screens in real time). Not much, but certainly enough to drive me crazy enough. This request veeery mouse movements delicate, almost like with an old PC if you know what I'm talking about, otherwise I 'miss' buttons and other things GUI I want to click because I overcompensate my movements, so to speak.

  The monitor is connected through HDMI. I read things about HDMI not providing the highest possible refresh. I expect better results if I connect via Thunderbolt/DisplayPort? If so, I would need an adapter mini-DP and DP. This card must meet specific requirements?

  My question is not similar to the questions of others since my internal screen is behaving properly. Any ideas?

  (If you have an idea, please do not check your answer as "good response" before checking with me, thank you.)

  mouse cursor movement is undoubtedly lag

  It's counterintuitive, but the most common cause for follow-up of the mouse lag ' uses in all cycles CPU ", does NOT slow updating the display.

  Try to run CPU screen activity showing all processes, or to download and run a report of etrecheck .

  PS > the original poster is the only person who can mark answers as "solved my problem. But it the system encourages you to do by asking wrong questions along the way.

• ThinkPad Yoga 260 external monitor problem

  Greetings,

  I bought a Lenovo ThinkPad Yoga 260 (Core i7, 8 GB of RAM, Win10 Pro 64-bit, the Type of Machine 20FD) October 18, 2016.

  When I connect it to my external monitor Dell U2713H, the screen blackens periodically respectively off and turn it back on after 1-2 seconds. The display works fine with my other 260 Yoga with the same specifications.

  The problem occurs when connected via DisplayPort, but also via HDMI. I have all tried, installed upgrading the BIOS, all new drivers, reset the Yoga to the factory settings and tried it again.

  Have you any idea what need then try to solve this problem?

  Thanks in advance

  In response to customer reports of flashing or flickering on external monitors connected to Yoga 260 ThinkPad systems via an adapter OneLink + VGA/RJ45 or OneLink + dock, Lenovo has provided a solution for ThinkPad 260 Yoga systems under warranty.

  To contact the Lenovo Service, please click here and reference Service TIP SF16-T0080 / HT502248. This solution will require the 260 Yoga be repaired.

  Thank you

• Computer hangs after connecting external monitors.

  Original title: external monitors

  I have a Qompac Presario cq56 laptop, running windows 7 home premium. I connect it to my TV via a vga to hdmi. It works fine when running on battery, but when I connect the power cord the computer starts to slow down and eventually freezes. Also when I plug the power into the screen decreases intensity. The converter has its own power supply. I was wondering anyone has the solution to the problem.

  Hello Stephen,

  Thank you for your response.

  I am happy to know that your problem got solved.

  Feel free to write us if you encounter any other problem related to Windows.

• Re: Satellite A200-1IZ - external monitor problem

  Hello
  I recently bought an IPS monitor for photo editing. I configured the monitor in several ways, such as two monitors or monitors extended, but the image on the external monitor has a few little flicker and the image is not very pleasing to the eyes, a feeling like little refreshment on old monitor, very disturbing for the eyes.
  I plugged the monitor into another laptop and the image is much better.

  What could be the problem? I have Windows 7 32 bit and Ati Mobility Radeon HD 2600 adapter with the latest drivers.

  We do not know what monitor you have exactly, but what is the native screen resolution and what resolution is set to the external monitor when you use it with your laptop?

• can not turn on inspiron 5160 after connected external monitor

  last night, I tried to connect external crt monitor to my inspiron (when starting). After a few seconds, laptop screen became black and laptop was closed down. the crt screen was blank all the time.

  After that I can't turn on my laptop at all: it stops after 3-5 seconds (just before the beginning of the display).

  can someone help me with this?

  Kind regards

  S.

  
  

• Tecra 9100: Unable to connect external monitor to the APR III Plus via DVI

  Hello
  I have a laptop Tecra 9100 that I try to use with an Advanced Port Replicator III (APR3 +) to connect to an LCD flat screen widescreen Dell via the DVI connector, but so far without success.

  All other connections on the APR3 + operate without problem, the monitor stir however not until Windows finishes loading, how it shows a totally white screen with black bars very close down vertically.
  I upgraded to the latest version of the BIOS and tested all the cables, but in vain. I also carefully searched from Toshiba Web site, but the only document which deals with taken ports supported on the APR3 + I can find does not list my laptop model at all.

  Please can you tell me if this mode of operation is supported and if it is how to enable it?
  Alternatively, if it is not supported, could I use a VGA - DVI cable to connect the APR3 + LCD flat screen?

  Concerning
  Ross.

  Hello

  I see that you have updated the BIOS. I think that it was not a bad idea, but you also need to check if you have installed the latest version of TOSHIBA Mobile Extension 3.
  I don't know if that helps, but please check.

  How to check the current version of TOSHIBA Mobile Extension 3
  -Select Control Panel in the start menu.
  S ' please click on ' Add / Remove Programs "from the control panel.
  -TOSHIBA Mobile Extension 3 for Windows XP V3.xx.xx.XP"appears in the list of software to ' Add or Remove Programs".
  -If the current version of TOSHIBA Mobile Extension 3 installed on your computer is V3.19.00.XP or more, please upgrade to the new version V3.21.00.XP.

  How to upgrade the TOSHIBA Mobile Extension 3 to version V3.21.00.XP
  -Uninstall the current version of TOSHIBA Mobile extension 3
  -Restart the computer.
  -Download the new version, unzip it by running, and run "Setup.exe" from the compressed file.

• Tecra A2 external monitor problems

  Recently, I broke the screen on my A2 and until I can afford to get it fixed, want to use a monitor tft external that I have. I use fn and f5 to enable vga but the resolution is all wrong, and when I try to change the tft screen is disabled and it is up to the laptop broken screen I can't see.

  Anyone have any ideas on how to solve this problem?

  Thank you

  Hello

  I put t know why you suggest that your resolution is fake because I checked the resolution display information and it seems that the max resolution is 1024 x 768.

  In addition, FN + F5 key combination doesn't change the screen resolution but display devices. You can use this function to switch from an extended desktop, external display and two screens.
  If you want to change the display resolution, so you should go to the display properties. Here, you can change the settings.

• Connect external monitor via the VGA port > > BSOD

  Hi all

  I have a laptop Acer Aspire V3-772 and I had an (obvious) problem. When I connect an externel to my VGA port my laptop freezes. After that I restarted my laptop (still connected to the monitor via the VGA input) I get the following BSOD:

  video_tdr_failure igdkmd64.sys

  This error I've read on the internet has nothing to do with the video card intel. On this laptop, there intel 4600 internal videocard. There is also a second video card which is geforce gtx 760 m.

  I updated my system completely and everything works fine. Except the VGA port.

  I tested my HDMI port that works correctly, open the same screen/monitor connected via the VGA input it freezes / BSOD.

  One give me advice on what could be the cause?

  is this hardware or software really? I think that the software. In any case I'll try to install the older version of the video card driver intel. I'll post if it works.

  I would like to have some advice on this issue.

  Thank you!

  Thanks for your reply. I tried already. HDMI works very well but even VGA displayport monitor (so double male vga cable) causes system hang still > BSOD.

  I did a factory reset. Same result.

  Conclusion... Its a hardware problem.
  I'll contact support so they can pick up my laptop for repair.
  I lost my weekend for this problem.

  I'll change this topic as resolved since it's associated mobo (intel grappics card).

• Re: Connect external monitor for Satellite Pro

  Hello

  I tried to connect my TV to my laptop Satellite Pro using an HDMI cable and a HDMI VGA cable. I did the key function and 5 but the TV always displays no signal, I checked the plug HDMI plugs into TV (3 of them) with my Virgin media TV box and they all work as expected, any help would be appreciated, does my nut with respect.

  Updated drivers and tried ATI tool without result, actually when I plug the HDMI into the laptop it doesn't recognize it, but it will be visible in the ATI software but still no signal.

  Any info appreciated
  Win 7 32 bit. Satellite Pro Bush 32 '' TV connection. .

  Hello

  If yo9ur laptop is preinstalled with the original operating system that you have received from Toshiba and if you use high quality HDMI Cable t should work.

  I put t know how it works on your TV, but if you use the HDMI 1 port number please allow this TV port and when this port is enabled using FN + F5 key combination to witch from laptop to TV.
  When you use FN + F5 you see several options here? Something like LCD, LCD + HDMI or HDMI only.

• Communication with the external monitor problem

  When watching a video or tv content on the internet via our hdmi tv, after some time, the screen goes black, a few moments later, the sound turns off, then the laptop restarts. This does not happen if I look at the content that has been downloaded to the laptop then played through the TV. The error message that appears in Event Viewer is the following:-

  Log name: System Source: Microsoft-Windows-DistributedCOM Date: 16/09/2016-16:53:11 event ID: 10016 task category: no level: error keywords: Classic user: computer ACER_LAPTOP\Hilary: Acer_laptop Description: the machine default permission settings do not grant approval to activate local for the COM with CLSID {C2F03A33-21F5-47FA-B4BB-156362A2F239} server application and the APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} the user Acer_laptop\Hilary (S-1-5-21-862588424-839220286-1550613147-1001) SID address LocalHost (using LRPC) running in the container of the application Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy SID (S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742). This security permission can be modified using the Component Services administrative tool. The event XML: 10016 0 2 0 0 0 x 8080000000000000 22079 system Acer_laptop machine-default local Activation {C2F03A33-21F5-47FA-B4BB-156362A2F239} {316CDED5-E4AE-4B15-9113-7055D84DCC97} Acer_laptop Hilary S-1-5-21-862588424-839220286-1550613147-1001 LocalHost (using LRPC) Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742

  Can someone tell me what is the cause and how can I solve this problem? Thank you.

  Thought I would let you know that, by chance, I came to find the fix on the Microsoft Community website.

  The issue might be related to display drivers and try again the steps to uninstall graphics cardin Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

   

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  I tried and it seems to have worked so far. Fingers crossed!

  Thanks for your advice. Maybe this will add to the knowledge base for future issues.

  H

• Unable to connect external monitor

  My Pavilion with Vista home premium dv6910 won't see a 17 in LCD hyundai when you use the control panel Nvidia GeForce Go 715 m to implement the 2 monitors. It worked for awhile, but after trying to tweak the settings, that it stopped. The monitor works fine on other computers. Is it possible to erase the memory of the monitor with the Nvidia card?

  Uninstall the NVIDIA graphics driver.

  Resources:

  How to uninstall or change a program on Vista

  Download and install the latest HP NVIDIA graphics driver from here.

  Restart the system one to control the result.

• External monitoring problem

  I have a Canopus ADVC-300 that I use as a box of firewire to my external supervision.  I use it with success every day with Sony Vegas and Adobe After Effects.  But for some reason, I have not been able to make it work with any version of Premiere Pro.  I have the Collections Master CS4 and CS5, so I have the two Premiere CS4 and CS5, and no work.  When I go into Preferences > player settings, the only option I have in the menu dropdown is Adobe Player, there is no option OHCI IEEE or DV, just Adobe Player.  Under sequence settings > playback settings, there is an option for DV: 23.976 720x480p peripheral, but the selection that doesn't seem to work.  I don't know that it is important that the option is in the settings of the sequence because I am not able to access the device in the Preferences section.  I know that Windows is seeing the unit because when I turn it on, an AutoPlay opens and gives me options for the use of my video camera, and it works really well with After Effects and Vegas.  If the thoughts?  I'm looking in the right places to ensure that first is to see my device?

  Thanks for any help or suggestion!

  You use the material/GPU acceleration with MPE? If so, you must disable the GPU acceleration; Output DV does not work when the GPU is in force.

• Satellite L40 - BIOS - the external monitor connection preferences

  Hello!
  I have some problems with the external monitor (CRT) connection for laptop L40 - 17O (PSL4CE).
  Matrix on it is broken. There is no windows installed.
  I connect external monitor, but I don't see anything. I heard that it is necessary to change something in the BIOS, but it's hard to do that without image =)
  Would be great if someone who has the same note would say what button to press to enter the BIOS and change the options in this way. Or perhaps someone could take a snapshot of the bios and its options.
  I'm looking forward to see answers)

  Normally it should be an option in the BIOS where you can choose, if it isn't the internal LCD screen, or both or is automatically activated after connecting a display to the machine.

  Under Windows, the combination FN + F5 does exactly what you need: it goes from the screen.

  Could you please check your BIOS and attention to the options in the form? I guess that basic finding. :)

  Welcome them