External monitor problem

Similar Questions

• Re: Satellite A200-1IZ - external monitor problem

  Hello
  I recently bought an IPS monitor for photo editing. I configured the monitor in several ways, such as two monitors or monitors extended, but the image on the external monitor has a few little flicker and the image is not very pleasing to the eyes, a feeling like little refreshment on old monitor, very disturbing for the eyes.
  I plugged the monitor into another laptop and the image is much better.

  What could be the problem? I have Windows 7 32 bit and Ati Mobility Radeon HD 2600 adapter with the latest drivers.

  We do not know what monitor you have exactly, but what is the native screen resolution and what resolution is set to the external monitor when you use it with your laptop?

• ThinkPad Yoga 260 external monitor problem

  Greetings,

  I bought a Lenovo ThinkPad Yoga 260 (Core i7, 8 GB of RAM, Win10 Pro 64-bit, the Type of Machine 20FD) October 18, 2016.

  When I connect it to my external monitor Dell U2713H, the screen blackens periodically respectively off and turn it back on after 1-2 seconds. The display works fine with my other 260 Yoga with the same specifications.

  The problem occurs when connected via DisplayPort, but also via HDMI. I have all tried, installed upgrading the BIOS, all new drivers, reset the Yoga to the factory settings and tried it again.

  Have you any idea what need then try to solve this problem?

  Thanks in advance

  In response to customer reports of flashing or flickering on external monitors connected to Yoga 260 ThinkPad systems via an adapter OneLink + VGA/RJ45 or OneLink + dock, Lenovo has provided a solution for ThinkPad 260 Yoga systems under warranty.

  To contact the Lenovo Service, please click here and reference Service TIP SF16-T0080 / HT502248. This solution will require the 260 Yoga be repaired.

  Thank you

• Tecra A2 external monitor problems

  Recently, I broke the screen on my A2 and until I can afford to get it fixed, want to use a monitor tft external that I have. I use fn and f5 to enable vga but the resolution is all wrong, and when I try to change the tft screen is disabled and it is up to the laptop broken screen I can't see.

  Anyone have any ideas on how to solve this problem?

  Thank you

  Hello

  I put t know why you suggest that your resolution is fake because I checked the resolution display information and it seems that the max resolution is 1024 x 768.

  In addition, FN + F5 key combination doesn't change the screen resolution but display devices. You can use this function to switch from an extended desktop, external display and two screens.
  If you want to change the display resolution, so you should go to the display properties. Here, you can change the settings.

• NB200-10Z connection external monitor problems

  Hello

  I tried to connect my NB200-10Z to my LCD TV using a VGA - DVI connector. Now, I have connected my DVI cable into the socket, then the TV.

  For some reason any TV is not recognized by the netbook. I tried the FN + F5 key and it only shows the lcd - associated with the netbook screen.

  I thought that maybe I need an update of the display driver, but it seems that I have the latest version (6.14.10.4926)

  Rebooted the system, no effect.

  I used to have my other laptop connected to the TV before, so the problem must be with this netbook.

  Any idea?

  Enjoy your thoughts...

  See you soon,.

  Richard

  Are you running XP or Windows 7 starter edition? With Windows XP, right-click on an empty spot on the desktop and click Properties and click the resolution tab and there you can set the second monitor, sometimes you need to use the icon next to the clock that is the video properties intel to extend the monitor...

  If you are unning Windows 7 Starter it does not support the extended monitors only mirrored...

  HTH,

  The f

• Communication with the external monitor problem

  When watching a video or tv content on the internet via our hdmi tv, after some time, the screen goes black, a few moments later, the sound turns off, then the laptop restarts. This does not happen if I look at the content that has been downloaded to the laptop then played through the TV. The error message that appears in Event Viewer is the following:-

  Log name: System Source: Microsoft-Windows-DistributedCOM Date: 16/09/2016-16:53:11 event ID: 10016 task category: no level: error keywords: Classic user: computer ACER_LAPTOP\Hilary: Acer_laptop Description: the machine default permission settings do not grant approval to activate local for the COM with CLSID {C2F03A33-21F5-47FA-B4BB-156362A2F239} server application and the APPID {316CDED5-E4AE-4B15-9113-7055D84DCC97} the user Acer_laptop\Hilary (S-1-5-21-862588424-839220286-1550613147-1001) SID address LocalHost (using LRPC) running in the container of the application Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy SID (S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742). This security permission can be modified using the Component Services administrative tool. The event XML: 10016 0 2 0 0 0 x 8080000000000000 22079 system Acer_laptop machine-default local Activation {C2F03A33-21F5-47FA-B4BB-156362A2F239} {316CDED5-E4AE-4B15-9113-7055D84DCC97} Acer_laptop Hilary S-1-5-21-862588424-839220286-1550613147-1001 LocalHost (using LRPC) Microsoft.Windows.Cortana_1.6.1.52_neutral_neutral_cw5n1h2txyewy S-1-15-2-1861897761-1695161497-2927542615-642690995-327840285-2659745135-2630312742

  Can someone tell me what is the cause and how can I solve this problem? Thank you.

  Thought I would let you know that, by chance, I came to find the fix on the Microsoft Community website.

  The issue might be related to display drivers and try again the steps to uninstall graphics cardin Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the section of the graphics card .
  • Find the Display card Driver.
  • Graphics Driver right click and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

   

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the Display card Driver.
  • Display driver card click right and select Uninstall.
  • Restart the computer after the uninstall is complete.

  I tried and it seems to have worked so far. Fingers crossed!

  Thanks for your advice. Maybe this will add to the knowledge base for future issues.

  H

• External monitoring problem

  I have a Canopus ADVC-300 that I use as a box of firewire to my external supervision.  I use it with success every day with Sony Vegas and Adobe After Effects.  But for some reason, I have not been able to make it work with any version of Premiere Pro.  I have the Collections Master CS4 and CS5, so I have the two Premiere CS4 and CS5, and no work.  When I go into Preferences > player settings, the only option I have in the menu dropdown is Adobe Player, there is no option OHCI IEEE or DV, just Adobe Player.  Under sequence settings > playback settings, there is an option for DV: 23.976 720x480p peripheral, but the selection that doesn't seem to work.  I don't know that it is important that the option is in the settings of the sequence because I am not able to access the device in the Preferences section.  I know that Windows is seeing the unit because when I turn it on, an AutoPlay opens and gives me options for the use of my video camera, and it works really well with After Effects and Vegas.  If the thoughts?  I'm looking in the right places to ensure that first is to see my device?

  Thanks for any help or suggestion!

  You use the material/GPU acceleration with MPE? If so, you must disable the GPU acceleration; Output DV does not work when the GPU is in force.

• Tecra S1 - display problem, even on external monitor

  One day I was using the laptop, surfing the net normally, everything was fine and suddenly the screen went bad... (photo below). I tried using an external monitor and still the same, so I'm sure that my monitor is fine and it is probably a problem of display card?
  I tried to update my display card driver and no luck, so I decided to use the recovery CD to restore the system and no luck once again.

  Here is a screenshot after the system restore... y at - there a way to fix this without taking it to a service center?
  Thank you
  Link: [http://i130.photobucket.com/albums/p262/ctb205/mon.jpg]

  Hi borist,

  It s really great that you could post a picture of your problem. Thank you!
  In addition, you have already tried a lot of as the recovery facility and an external monitor.

  Unfortunately, it seems to be a hardware malfunction of graphics card. :(

  This means that you will need to swap the motherboard because the graphics card is fixed on it. Motherboard is a party quite expensive and Tecra S1 is old notebook then maybe you can get a second hand or laptop motherboard on eBay and swap it out.

  Good luck! :)

• Qosmio X 300-problem of external monitor

  Hi all!

  I am the proud owner of a 300-157 x, but I have a problem. I would use my laptop as a desktop workstation and use an external VGA monitor to the output.
  Everything is fine when the operating system (Vista or Ubuntu) is responsible, but I can't figure out how to make the external monitor to view BIOS and POST messages to completely get rid of the internal display.

  Any clue?

  >... I can't understand how the external monitor to view BIOS and POST messages to completely get rid of the internal display.
  AFAIK this option doesn't exist. In General, computer laptop Qosmio is designed as a multimedia mobile gear and games. Of course you can use it with external screen or a TV, but I think that it is not designed to be desktop replacement. For example, professional laptop computers Tecra and Portege that can be used with a docking station to have multiply and different options for use with external display.

  I had X 300 but I ve never used it with external monitor so I can't say with certainty how it works but if I m remembering well this option to disable the laptop computer's display is not available.

  Every time when you want to use your laptop as a desktop replacement you should open it, start it, wait that the OS is fully charged, switch to the external display (FN + F5), and then close the cover.
  I know it's a little annoying, but, more or less, in 2 minutes, you can use your laptop as a desktop replacement, especially if you use an external wireless keyboard.

• Satellite L650-12 q - external monitor through HDMI problem after waking up

  Hello

  My problem is that after external monitor goes to sleep and then wakes up again the image on the screen is bigger than the screen acctualy. This means that I don't see a part of the image (my office) as part of the taskbar and my settings is changed into 59Hz instead of 60, so when I change them back to 60 hz in Panel intel HD graphics everything looks ok, but it happends once again after the monitor going to sleep How to solve this problem?

  I've updated display drivers to the newest in this web site, which is 8.15.10.2086 of [here | http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 5376 & selSh ortMod = 1007 & language = 13 & selOS = null & selType = null & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 8 & selectedLanguage = 13 & type = null & page = 2 & ID = 74203 & O SID = 30 & driverLanguage = 42] :
  My monitor is HP 2710 m connected via HDMI 1920 x 1080 p.

  Any ideas?

  Hi evaldas,.

  You have the same problems when you try another HDMI cable?
  You can also test it with normal VGA (RGB) connection?

  Sorry, but everything that s what I can say for the moment that seems strange to me

• Problems to project a PowerPoint presentation (2015) for external monitor/screen/projector

  I have a problem with PowerPoint presentations (2015) on my MacBook Air (Early 2015). When I go to the slide show-> game start, or when I click on the shortcut at the bottom of my document presentation button, I get the speaker on my mac book but not slideshow on the external display. My background image appears on the external display. If the computer and the monitor are communicating properly. My computer is selected as the control view. When I go to slide show-> Set up show, the external monitor is selected for display. The only way I can find a way show presentation is to select 'Swap poster' view of the presenter, and then go to the external display and select monitors swap to switch back. Another weird thing. If I mouse over the slide in the main presentation while in speaker on my laptop (none other than the background on the external screen image), the presentation gets confused and attempted to show the screen of the speaker AND presentation both on my laptop. Help! PowerPoint presentation is an important part of my work, and it gets really annoying.

  Thank you for all the ideas/solutions!

  I had the same problem for two days with two different projectors; a NEC and Epson. The only way I could make it work was starting up in 10 Windows via Parallels and the opening presentation. Everything works fine through Windows 10. I hope that Apple will release a fix soon! I don't like to run Windows, any more than I absolutely have to.

• Dynadock U Display problems on external monitor.

  I have a U Dynadock docking station connected to a laptop of HP Elitebook. I have a 24 "FullHD Viewsonic external monitor connected to the DVI - D port on the Dynadock and a second monitor connected to the VGA port on the laptop. The second monitor works fine but the main monitor connected to the Dynadock is slow to update, I can't use AutoCAD or software playback such as display support will not regenerate properly, in other words each movement leaves a trace and screen ends up a mess, videos on the used media player are not working at all, however if I move the on the second monitor, they work fine.

  The primary monitor is set to the resolution 1920 x 1080.

  The second problem is whenever I restart to start the laptop the primary monitor is at a lower resolution I need to readjust every time. It didn't happen for the first days, I got the Dynadock, but now it happens every time. I downloaded the latest DisplayLink driver but did not help. I also tried to download the latest Dynadock driver but could not get the image of CD ROM to run.

  > The second monitor works fine but the main monitor connected to the Dynadock is slow to update, I can't use AutoCAD or software support of reading such as the display refresh correctly, in other words, each movement leaves a trace and the screen ends up a mess, videos on the used media player work not at all However if I move the on the second monitor, they work fine.

  The Dynadock is connected to the computer via a USB cable to the USB port.
  In my opinion the USB ports are not designed to transfer this large amount of data that are created by a video.

  You can use the Dynadock as part of some office applications, a software, but I doubt it would work properly I watch the video on the external monitor.

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Problems with the external monitor W540 connection

  Hi, maybe someone can help me. I'm trying to connect a W540 (no external dock) to an external monitor Dell.

  I tried with two monitors, but none work.

  Connected via VGA port on the side of the W540

  (1) connected monitor and clogged up the resolution of the screen on laptop (lines icons tiny, black on each side of the screen). External monitor works fine. When unplugged, it went back to the previous screen resolution.

  (2) laptop registered resolution and icon size of the screen as a profile.

  (3) external monitor connected right click options graphics Intel, insured was custom display, main display plus external monitor, then had to go in a re - click on the name of the saved profile.

  (4) this worked ok until the next day, when turned on laptop and a blue screen. Managed to get this back hard by restarting and completed the steps in N3

  (5) cannot get the Nvidia Control Panel to display anything else than the 3D options, even if it make the default value (instead of the Intel graphic card)

  Can anyone offer some so that I can connect an external monitor without having to go through all this hassle every time? Why this affects the laptop so bad (and also, it runs very slowly after that)

  Running Windows 8 (but with the interface of Windows 7)

  Thank you very much

  Thank you. A quick update, I contacted Lenovo, and they sent the updated bios drivers. I also uninstalled some software Canon MP Navigator and Lenovo EMC Discovery (http://support.lenovo.com/us/en/documents/ht081844?tabName=Solutions). One or all of them seem to have solved the problem, including the slow start.

• Multiple monitors in the problem. External monitor display full desktop but no video in windows media player.

  I plugged a LCD TV to my laptop using a VGA cable. LCD TV display the full desktop.

  When I play a video in Windows Media Player video area is not displayed on the LCD screen, the rest all is shown.

  When I ran the player VLC video did not show, but when I changed the video option "overlay video output" i.e disabled this option, the video was shown on the LCD.

  But there is no option in WMP. How in WMP?

  What is the problem?

  Maryse Agarwal

  not a driver problem

  found the solution, I used both the computer laptop lcd and the external monitor

  When I went just outside, he played

  This is because the graphics card offers support for playback of the video when you play the video on the internal monitor

  Maryse Agarwal