NB200: cannot enable W - Lan with Fn + F8

Similar Questions

• CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

  Hello

  I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match?   Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

  Please see my full configuration:

  Router #sh run
  Building configuration...

  Current configuration: 8150 bytes
  !
  ! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Passwords security min-length 6
  no set record in buffered memory
  enable secret 5 xxxxxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  IP source-route
  no ip free-arps
  IP cef
  !
  Xxxxxxxxx name server IP
  IP server name yyyyyyyyy
  !
  Authenticated MultiLink bundle-name Panel
  !

  parameter-map local urlfpolicy TSQ-URL-FILTER type
  offshore alert
  block-page message "Blocked according to policy"
  parameter-card type urlf-glob FACEBOOK
  model facebook.com
  model *. Facebook.com

  parameter-card type urlf-glob YOUTUBE
  mires of youtube.com
  model *. YouTube.com

  parameter-card type urlf-glob CRICKET
  model espncricinfo.com
  model *. espncricinfo.com

  parameter-card type urlf-glob CRICKET1
  webcric.com model
  model *. webcric.com

  parameter-card type urlf-glob YAHOO
  model *. Yahoo.com
  model yapo

  parameter-card type urlf-glob PERMITTEDSITES
  model *.

  parameter-card type urlf-glob HOTMAIL
  model hotmail.com
  model *. Hotmail.com

  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-2049533683
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2049533683
  revocation checking no
  rsakeypair TP-self-signed-2049533683
  !
  Crypto pki trustpoint tti
  crl revocation checking
  !
  Crypto pki trustpoint test_trustpoint_config_created_for_sdm
  name of the object [email protected] / * /
  crl revocation checking
  !
  !
  TP-self-signed-4966226213 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
  69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

  quit smoking
  encryption pki certificate chain tti
  for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
  license udi pid CISCO1905/K9 sn xxxxxx
  licence start-up module c1900 technology-package datak9
  username privilege 15 password 0 xxxxx xxxxxxx
  !
  redundancy
  !
  !
  !
  !
  !
  type of class-card inspect entire tsq-inspection-traffic game
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  match Protocol l2tp
  class-card type match - all BLOCKEDSITES urlfilter
  Server-domain urlf-glob FACEBOOK game
  Server-domain urlf-glob YOUTUBE game
  CRICKET urlf-glob-domain of the server match
  game server-domain urlf-glob CRICKET1
  game server-domain urlf-glob HOTMAIL
  class-map type urlfilter match - all PERMITTEDSITES
  Server-domain urlf-glob PERMITTEDSITES match
  inspect the class-map match tsq-insp-traffic type
  corresponds to the class-map tsq-inspection-traffic
  type of class-card inspect correspondence tsq-http
  http protocol game
  type of class-card inspect all match tsq-icmp
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect correspondence tsq-invalid-src
  game group-access 100
  type of class-card inspect correspondence tsq-icmp-access
  corresponds to the class-map tsq-icmp
  !
  !
  type of policy-card inspect urlfilter TSQBLOCKEDSITES
  class type urlfilter BLOCKEDSITES
  Journal
  reset
  class type urlfilter PERMITTEDSITES
  allow
  Journal
  type of policy-card inspect SELF - AUX-OUT-policy
  class type inspect tsq-icmp-access
  inspect
  class class by default
  Pass
  policy-card type check IN and OUT - POLICIES
  class type inspect tsq-invalid-src
  Drop newspaper
  class type inspect tsq-http
  inspect
  service-policy urlfilter TSQBLOCKEDSITES
  class type inspect tsq-insp-traffic
  inspect
  class class by default
  drop
  policy-card type check OUT IN-POLICY
  class class by default
  drop
  !
  area inside security
  security of the OUTSIDE area
  source of security OUT-OF-IN zone-pair outside the destination inside
  type of service-strategy check OUT IN-POLICY
  zone-pair IN-to-OUT DOMESTIC destination outside source security
  type of service-strategy inspect IN and OUT - POLICIES
  security of the FREE-to-OUT source destination free outdoors pair box
  type of service-strategy inspect SELF - AUX-OUT-policy
  !
  Crypto ctcp port 10000
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  Group 2
  !
  ISAKMP crypto client configuration group vpntunnel
  XXXXXXX key
  pool SDM_POOL_1
  include-local-lan
  10 Max-users
  ISAKMP crypto ciscocp-ike-profile-1 profile
  vpntunnel group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-TRANSFORMATION TSQ
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  !
  interface GigabitEthernet0/0
  Description LAN INTERFACE-FW-INSIDE
  IP 172.17.0.71 255.255.0.0
  IP nat inside
  IP virtual-reassembly in
  security of the inside members area
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Description WAN-INTERNET-INTERNET-FW-OUTSIDE
  IP address xxxxxx yyyyyyy
  NAT outside IP
  IP virtual-reassembly in
  security of the OUTSIDE member area
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  no fair queue
  2000000 clock frequency
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
  IP forward-Protocol ND
  !
  no ip address of the http server
  local IP http authentication
  IP http secure server
  !
  IP nat inside source list 1 interface GigabitEthernet0/1 overload
  IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
  IP route 192.168.1.0 255.255.255.0 172.17.0.6
  IP route 192.168.4.0 255.255.255.0 172.17.0.6
  !
  access-list 1 permit 172.17.0.0 0.0.255.255
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip yyyyyy yyyyyy everything
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport input ssh rlogin
  !
  Scheduler allocate 20000 1000
  end

  A few things to change:

  (1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

  (2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

  access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

  access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

  overload of IP nat inside source list 120 interface GigabitEthernet0/1

  No inside source list 1 interface GigabitEthernet0/1 ip nat overload

  (3) OUT POLICY need to include VPN traffic:

  access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

  type of class-card inspect correspondence vpn-access

  game group-access 121

  policy-card type check OUT IN-POLICY

  vpn-access class

  inspect

• Cannot use wireless LAN with my Satellite Pro A100

  Toshiba Satellite Pro A100-830
  NETGEAR DG834G

  Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

  I don't know much about the technical aspects and therefore ask for help so any reader can.
  Thank you
  Kris

  > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

  You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
  Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

  I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

• Cannot read a dvd with windows media player

  Cannot play dvd's with windows media player or media Center, am running windows 7 Home premium 64 bit on a new machine. Have installed the codecs, but no luck, have the wristmaster great samsung that uses the latest windows drivers. I can listen to music and view photos

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  Language: English (regional setting: English)
  System manufacturer: MICRO-STAR INTERNATIONAL CO., LTD.
  System model: MS-7529
  BIOS: Default system BIOS
  Processor: Intel (r) Core (TM) 2 Quad CPU Q8200 2.33 GHz (4 CPUs), ~2.3GHz
  Memory: 4096 MB RAM
  Available OS memory: 4096 MB RAM
  Page file: 1364MB used, 6824 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode
  DxDiag previously: crashed in the information system (step 4). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  --------------------
  DirectX Debug levels
  --------------------
  Direct3D: 0/4 (detail)
  DirectDraw: 0/4 (detail)
  DirectInput: 0/5 (retail)
  DirectMusic: 0/5 (retail)
  DirectPlay: 0/9 (detail)
  DirectSound: 0/5 (retail)
  DirectShow: 0/6 (detail)

  ---------------
  Display devices
  ---------------
  Card name: NVIDIA GeForce 8500 GT
  Manufacturer: NVIDIA
  Track type: GeForce 8500 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0421 & SUBSYS_047B10DE & REV_A1
  Memory display: 2797 MB
  Dedicated memory: 1005 MB
  Shared memory: 1791 MB
  Current mode: 1680 x 1050 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: W2242
  Monitor ID: GSM5677
  Native mode: 1680 x 1050 (p) (59,883 Hz)
  Output type: HD15
  Driver name: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
  The driver file version: 8.17.0011.9562 (English)
  Driver version: 8.17.11.9562
  DDI version: 10
  : Model WDDM 1.1 driver
  Driver attributes: Final retail
  Driver Date/size: 11-21-2009 04:34:54, 11775080 bytes
  Would be WHQL logo: Yes
  Date stamp WHQL:
  The instrument identifier: {D7B71E3E-4761-11CF-3456-70241FC2C535}
  Vendor ID: 0x10DE
  Device ID: 0 x 0421
  SubSys ID: 0x047B10DE
  Revision ID: 0x00A1
  Strong name of the driver: oem2.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section009:8.17.11.9562:pci\ven_10de&dev_0421
  The driver rating: 00E62001
  Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
  Deinterlace caps: {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) Format (In/Out) = (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, UYVY) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, 0 x 32315659) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC1, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC2, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC3, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (IMC4, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S340, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {6CB69578-7617-4637-91E5-1C02DB810285}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format (In/Out) = (S342, UNKNOWN) Frames(Prev/Fwd/Back) = (0,0,0) Caps
  D3d9 Overlay: support
  DXVA-HD: support
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Could you please answer these money questions?

  (a) could you tell us what happens when you play the dvd?

  (b) how do you try to play the dvd?

  (c) you receive an error message?

  (d) do you have the latest changes the software on your computer?

  (e) have you tried the dvd in another computer?

  Please get back to us with answers, so that we will be in a better position on this issue.

  However, if you want to solve this problem, you can follow the link below to run the troubleshooter to Open the troubleshooting Windows Media Player DVD Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Thank you, and in what concerns:

  I. Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Cannot retrieve host associated with a substituent VMs

  Hi guys.

  This is my setup:

  vSphere 5.1

  Main site (Production)

  Cluster, 7 guests.

  Compellent primary storage (with the Manager of the own company compellent).

  vCenter own VM

  a few replicant vms (with a server of domain names).

  Secondary site (remote)

  Cluster, 3 guests

  Secondary Compellent storage (with the Manager of the own company compellent).

  vCenter own VM.

  VM site recovery manager.

  No domain name server.

  So, when I test the recovery plan is working perfectly. Yesterday, I tried an exercise in failure:

  1 - Disconect link between the Production Site and the remote location.

  2. - connect my laptop in the Remote Site lan.

  3. - connect the vSphere Client in vCenter Secondary Site.

  4 - action for run for the stimulus plan.

  but fails when try to power of virtual machines. Error:

  Error: Cannot retrieve host associated with a substituent VMs. The connection to the remote server is down.

  There is something wrong with my setup, but why? I do not know. I check and rechek but I don't see the wrong configuration.

  Plese help. Any suggestion will be appreciated.

  Another question.

  My direct area on Site of Production secondary and primary servers. Is good practice developed a third active area living in a Remote Site Server?

  Greetings.

  Reason: this problem may occur if a virtual machine with the same name as the virtual computer space reserved already exists in inventory of vCenter Site Recovery SRM.

  To resolve this problem, try one of these options and make sure that there is no conflict of virtual machine name:

  1. change the name of the virtual machine that requires the protection of the protected Site.

  2 If the virtual machine on the recovering Site is necessary, change the name of the virtual machine for recovery Site.

  3. If the virtual machine on the recovering Site is not necessary (perhaps because it's an old placeholder virtual machine or a virtual machine created by mistake), remove the virtual machine from the inventory.

• I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version?

  I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version? My os is 10.4.11

  You can read this article: Firefox no longer works with Mac OS X 10.4 or PowerPC processors to read about the EOL for Mac 10.4 support and what the best options going forward.

• Computer format Microtour HP Pro 3010: Hp Support Assistant and LAN with Proxy authentication

  Dear friends,

  I would only know if and how I can 'use' Hp Support Assistant in my office desktop pc, because my desktop pc itself works in the breast of a LAN with proxy authentication.

  Thank you, Paolo ([Personal Information Removed)

  Hello

  Welcome to the HP Support forum!

  Yes, you can use it as long as the desktop PC is HP branded.

• Cannot see/Run JCarousel with FireFox

  Cannot see/run JCarousel with Firefox.

  I am able to see the main image and the images over the primary image line; but the javascript code which changes at each successive image does not work.

  I can't run any JCarousel with FireFox. National Geographic is just one example of the most recent which does not work.

  You have quite a few extensions you installed that can cause problems like that (Adblock Plus, Ghostery).

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  • If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.

• Cannot use iTunes Radio with my new Apple ID HELP!

  Help!

  cannot use the radio with my new id

• Cannot send/receive emails with jpg inserted or associated

  Cannot send/receive emails with jpg inserted or associated

  Although this issue has never been resolved, I will mark it as answered just to avoid the issue of cluttering the site.

  Dave

• I am making a new user account, but when I try to call my computer says that he cannot have another name with characters inside

  Original title: new user account...

  I am making a new user account, but when I try to call it my computer says it cannot have another name with characters inside (>)

  Hello

  I suggest you try to create the new user account using the command:

  'control userpasswords2' run box or the start search box and then create the new user account.

  Follow the steps for the same thing:

  a. click Start, type control userpassword2 in the search box and press enter.

  Hope the information is useful.

• Cannot find a volume with sufficient space for the extraction of the file, trying to watch a movie on netflix with Silverlight plug-in

  Install the Microsoft silverlight plug in. it's necessary to watch movies on my vista computer. When I try it is the message I get. Cannot find a volume with enough disk space for the file extraction. This is the message I get trying to watch a movie on netflix.

  Hi cardsharkha,

  I suggest you try the steps mentioned in the link below for cleaning broken Silverlight installation and check if the problem persists

  How to manually clean a broken Silverlight installation

  http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-Silverlight-installation.aspx

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• HP 5520: Cannot scan multiple pages with 5520 Scanner HP on Mac with Yosemite

  Hello, I am unable to scan several pages using my HP 5520 on my new iMac with Yosemite. I can scan only one page. The answers solved on this page are old and I can't make them work. Thanks a lot for your help!

  Hi @goldenm,

  Welcome to the HP Forums!

  I understand that you cannot scan multiple pages with your HP Photosmart 5520, on Mac OS X 10.10 Yosemite. I'm happy to help you!

  What happens when you try to scan several pages? Do you get any error messages?

  In the meantime, try the following steps:

  How to scan multiple pages into a single file with HP Scan?

  Load the document and use HP Scan to scan and save as a file of several page.

• Wireless Internet does not work. I get the error: "no operations can be performed on the LAN with its media disconnected in CMD".

  Hello, I followed the steps in the previous thread... Thank you.

  Im getting the message "no operation can be performed on LAN with its media disconnected in CMD"... help.

  My wireless will open any Web pages, although it seems to be connected and trouble shooter saying "DNS does not.

  original title: "DNS does not.

  Hello

  1. don't you make changes on the computer before this problem?

  Step 1: Make sure that switch WLAN is not turned off. To do this, you may need to consult the manual of the computer.

  Step 2: Reset the TCP/IP and WINSOCK stack.

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  netsh winsock reset catalog

  netsh int ipv4 reset reset.log

  netsh int ipv6 reset reset.log

• Cannot access a file with a padlock in the icon.

  Cannot access a file with a padlock in the icon.

  I created a file using an application called TV Expert (download the file of my Cam handy Sony Hi-8 on PC). I can access the file by using the software, but cannot access the file using Windows Explorer. The location of the file is c:\Program Files\TVExpert\Movie.

  The file size is about 3.6 GB , when I check the size of the Explorer folder it sows 0 bytes .

  When I open the file using the TV Expert software I see a Pad lock symbol in the icon of the file

  I want to copy the file to another location so that I can edit the file.

  Try this: right click on the file > do you see in unlock general tab button? If so, click it.

  ...

  If it does not help...

  What happens when you try to copy this file to another location? Do you take information that it can be done by the administrator? If Yes, there should be a continue button, so click it.

  You can also try this: right click on the file > Properties > Security tab. Who is listed under group or user names ? Is your user name? If not, you can click on change... > Add... > enter your username > OK