NB500 - connectivity of draft N Wireless

Similar Questions

• Satellite A300 - 12K unable to connect to the ADSL wireless modem

  My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
  However it connects to a modem that is not encrypted.

  Any idea what the parameters might have changed?

  Hello

  Why you n t reset the modem and check the settings?
  Configure encryption of the modem settings and encryption settings of the WLan card.
  Check if you are using the right key and change it if necessary.

  Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!

• HP Envy 4502: printer connection on my laptop wireless problem

  I installed the software on the disc that came with my new HP Envy 4502 printer on my HP laptop. He says that the software is installed correctly, but the printer is not connected wireless. Have you tried connecting via the usb cable and it worked. However, whenever I try to connect wirelessly, it fails to connect.

  I tried troubleshooting tips sevral time but still have no luck.

  My husband was able to insert the disc into his Dell laptop and connect the printer even wireless with no problems at all. This laptop is Windows 7 Professional.

  I'm getting more and more frustrated by the present, thank you I am a novice where computers re concerned, but that he thought that by purchasing an hp printer to go with my computer hp laptop, things would be easy.

  Help, please

  Take a look at this link on the implementation of WiFi.

• HP Envy 5530: Connecting to the correct wireless at the University

  My daughters computer connects to a network wireless, but when trying to connect to the same as that of the custom of the printer. It gives the following message. Unable to connect to the network. Type not supported authentication or encryption.

  I need the printer and the laptop on the same wireless network that we bought a repacement of instant ink service that must have the printer and the laptop connected. the service will not work without it.

  Printing is OK, that we had to go out and buy a cable that was an unwelcome expense.

  Any help greatly received.

  Well sorry, that most likely, it won't work not because the school uses the authentication of the company. Secondly, you never want a printer wireless on a public network. If it was that every student in the school can find the printer and print to this waste of reams of paper.

  Connect the printer via a USB cable for safety.  If the printer supports wireless Direct, that may work for you.

  EDIT-

  Read here on how to connect your printer to a network asking for additional security and information (username and password).

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-to-connect-your-wireless-printer-to-a-network-requesting/TD-p/4468642

• Cannot connect to Windows 8 wireless.

  I just got a new computer with Windows 8 and cannot connect my wireless Officejet 6500 JP.  If I attach to the computer with a USB port, it works but not wireless.

  Hi Rharring,

  Check if you can connect with the EWS printers, and if you see information the printer go ahead and run the Setup program to reinstall the printer. When you get to the connection type screen, select wireless or network, and then follow the instructions on the screen to complete the installation.

  Access to the HP embedded Web server

• I can't connect to the Internet wirelessly

  I just replaced my wireless device and now I can't connect to the Internet wirelessly

  Hi JimMahoney,

  You have installed the necessary drivers for your new wireless device?

  You receive an error message when you try to connect to the internet using your router?

  What virus protection software is installed on your computer?

  I suggest you try the steps mentioned below.

  Method 1: Run the network troubleshooter utility in Windows 7.

  Please follow the steps below mentioned link to run the network troubleshooter utility

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: You can also check the configuration of your new wireless device.

  Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

  I hope this helps.

• How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?

  How can I configure my Internet XP connection so that it will automatically connect to my WiFi (wireless) without asking me the password whenever I connect?

  original title: automatic Wifi connection

  Hello

  By default, Windows XP attempts to connect to networks without wires in the following order:

  1. Available networks that are in the list of network preferred (by order of registration)
  2. Preferred networks in the list proposed (by order of registration)
  3. Other networks according to selected advanced settings

  Check out these articles and check if that helps:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wireless_networking_overview.mspx?mfr=true

  To connect to an available wireless network

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_connect.mspx?mfr=true

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

   

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• Sometimes, I connect to other unsecured wireless and do not want to. My wireless 802.11 was swept away in several times, what causes this and is at - it a hotfix?

  I have an old toshiba phone that has msn phone dial inside program I use wire and that you don't have a phone number to put in what should be iI or is there a ms download

  I have xp home edition Service att tech and and when I take the computer to reinstall says the same thing > I have also a gateway that has the same problem, I sometimes connect to other unsecured wireless and do not want.  My wireless 802.11 was swept away in several times, what causes this and is at - it a hotfix.

  Hello

   

  I suggest you send your query to the solution Center MSN for better support for this topic:

  http://answers.MSN.com/

   

  Also suggest checking with you ISP provider

  http://www.att.com/eSupport/

• I have problems to connect to my network wireless computers in my house running XP Pro.

  Hello. I have problems to connect to my network wireless computers in my house running XP Pro. I set up my wireless router to use WPA - PSK encryption. When I type in the passphrase on computers running XP in my house, I get an error message indicating that the password must be 5 to 13 ASCII characters or 10 to 26 characters in hexadecimal. It doesn't even seem like it checks the password. The error immediately.

  I tried to connect to the network using my work running Windows 7 laptop and it works fine. Any help would be appreciated. Thank you.

  original title: cannot connect wireless

  Go, I tried and it worked was that you have to be sure what parameters you have set when you set the security of your are wireless (for example the Type of security, Encryption Type etc.) and they have to be compatible with the version of your laptop.
  Older versions usually have 64bitWEP or WEP 128 bit and newer versions have WPA, WPA2-Personal (PSK).

  The 64-bit and 128-bit require 5 or 13 characters. These characters can be obtained when you configure the wireless (it will ask you to put the characters and the characters will be automatically converted to hexadecimal characters, which it must be remembered that they are the password wireless).

  WPA or WPA2 - Personal (PSK) are easier to implement and the passwords are normal characters that you want it to be.

  Then go to your security wireless set up the page and re - configure the password or the type of network and it should help

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• remote access to the computer that is connected to a router wireless

  Hello Forum members

  I have a 4-port/router set-up wireless (compatible VPN) in the office.

  3 PC (Windows 7 Pro) is connected to a router (wired connection).

  1 VOIP adapter is connected to a router (wired connection).

  1 PC (Windows XP Pro SP3) is connected to a router (Wi - Fi).

  When I'm on the field, I need to access these devices via VPN. I can access 3 PC (connecting to the wired router) via VPN.

  However, I can not connect to a PC (wireless connection to the router) via VPN.

  Could you please tell me how I can access this PC (wireless connection to the router) via VPN?

  This PC (Windows XP Pro SP3) seems to need further adjustments under Windows Service.

  Thank you.

  Hello

  The question you have posted will be well suited in the TechNet forums. Click on the link below.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• HP OfficeJet 6500 E710n: HP OfficeJet 6500 printer problem - connection to new Comcast Wireless Gateway E710n

  Use this printer (wireless) for a few years without problem connected to a Linksys 802.11n wireless router.  Connected to a desktop computer and two laptops.

  Comcast asked recently that I update my modem cable to a new wireless, which also serves as a 802.11n access point wireless router.  I installed the new point wireless very well and has been able to set up the printer on a wireless network. (IP, host name and Mac address doesn't appear on the thin printer).

  I reinstalled the printer drivers on each computer and everything worked very well last weekend.  This weekend, I went to turn the Scanner on the desktop (HP Pavilion, Windows 7, 64-bit) and it wouldn't work.  Then I reinstalled the device drivers and then there was no connection to the printer (many reboots the PC and printer at various times during the tests).  So I ran again the connection settings on the printer - and led wireless term.  (I was able to get the scan to the connection to the computer once on one of the laptops, never the office, then lost.  When I send to the printer, it goes into the queue, a very small number of bytes, cross (usually hear the printer starts) then there lost error "connection to a printer.  Oddly enough, a couple of times after canceling the print job in the queue, the printed test page actually printed a few minutes later...

  I tried to use HP Print & Scan Doctor - it was a complete waste of time.  To date, it has always died (do not connect not not the unit) and never been able to diagnose something.  I end up having to go to the Task Manager to kill him because he always hangs.

  Any thoughts?  I'm puzzled.

  Appreciate any help/ideas that someone can think.

  FYI - I have still no idea what the question is / was?

  Connected to the gateway wireless from Comcast to the old Linksys router and I went back to my old wireless network.  After you have reinstalled the printer drivers, re-connection of the printer to the old wireless network, re-start the printer and computers - I was (finally...) manages to get printing and scanning works again.

  What a waste of a morning/afternoon.

• HP Stream 7 does not connect at 5 GHz Wireless-N

  The stream of HP 7 supports connections to 5 GHZ Wireless-N? The included Realtek driver shows the connections of B/G/N. I'm unable to connect to a wireless 5 GHz N I have running. I tried to create the connection manually, but he sees any of this wireless network. Thank you!

  Hello

  It takes only the 2.4 GHz network supported. All you need is to allow your router to broadcast the double bands. He sees the 2.4 GHz band.

  Kind regards.

• I use a Windows Vista I can connect to my tv wireless?

  I use a windows vista I can connect to my tv wireless?

  I use a windows vista I can connect to my tv wireless?

  You can if you have a wireless converter.

  Wireless PC to TV:
  http://www.Amazon.com/Warpia-StreamHD-wireless-full-1080p/DP/B004GTN0T4/ref=sr_1_1?s=electronics&ie=UTF8&QID=1317710448&SR=1-1