NEED EXPERTS ADVISE

Similar Questions

• reorg table - need experts advise

  Hi guys,.
  
  10.2.0.4
  
  Currently, our re - org criteria match table with > 10% string account to get rid of migrated lines requiring the addition i/o for index read.
  
  It is good to have another criterion to re - org table with holes in it? Understand that if we it defrag, the full scan time will improve...
  However the subsequent insertions, he will have to spend additional resources to extend the additional space? is it better not to re - org as oracle eventually will make use of empty space. We use lmt tablespace.
  
  Can he say how many ppl here are re - org table because it? hope you guys can share experience on it.
  If you need to make the fragmented space, the amount of empty space is considered a lot for a table to be chosen as re - org?
  
  Thank you

  Yes of course :-)
  Apart from this case, another case would be if you direct expenses only in the table after losses.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• Satellite R830 - 10 c: needing an adviser

  Hi guys,.

  Just wondering if there was someone out there with a Satellite R830 - 10 c who could advise me on how hot attributed to it.

  I'm looking to upgrade a netbook to one (cheapish) ultraportable and this looks like a really good report quality / price and well reviewed. However, I saw a few comments on the R830 - 11 c and -143 which seem to indicate that they are very hot on the bottom.

  I realize the 10 c is less powerful, so should work more fresh, but I need to be able to use it on my knees, leave it on sofa arms (not duvets or something stupid) etc. without any problem or I'm better to go for something bigger and cooler.

  Your advice would be much appreciated
  Tintalla

  The left side can get a little warm, but I don't think it's a shame. If you're just in the internet or light something else, then it remains relatively cool.

  If you are worried about the heat, you can be better off getting a slightly larger model with a larger chassis as the Tecra R840.

• Installation error message need expert advice-vista 0x80070005

  I need to help, while installing vista XP, using the $ 110 upgrade disc, im having trouble. about 22% by expanding the files I get the following message:

  "Windows cannot install required files. Network problems preventing windows access to the queue. Make sure that the computer is connected to the network and restart the installation. "Error code: 0x80070005.

  Its an AMD Athlon 1.61 GHz with about 900 MB of ram and 70 GB hardrive xp running.

  Im trying to upgrade to vista, I have no network, im on the administrative account logon. How to improve it please help

  Hi thedudeman,.

  Welcome to Microsoft Vista answers Forum!

  I have a few here that might solve the problem.

  You can try to perform a clean boot in this situation by following method 2 in this link:

  http://support.Microsoft.com/kb/310353

  Note:-   after this please reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  1. On the general tab, click the Normal startup option, and then click OK.
  2. When you are prompted to restart the computer, click restart.

  You can now go ahead and uninstall the application that caused this problem.

  If this does not work, try the following steps: -.

  First of all, you have to back up all the data your Windows XP operating system.

  You run the risk of losing your data without backup of data.  Data loss can occur in several ways. One of the most common causes is a physical failure of the media on which the data is stored. Probably, you have everything stored on the hard drive of your PC.

  In order to perform data back up follow the steps mentioned in this link: -.

  http://support.Microsoft.com/kb/308422

  ·         You can now go ahead and perform a new installation of Windows XP.

  ·         After that, use the diskette to upgrade and install Windows Vista without installing applications.
  

  Visit the following link for information on how to upgrade the operating system to Windows Vista and install it: -.

  How to install Windows Vista

  http://support.Microsoft.com/kb/918884

  If you think it takes for you to replace the disc you can contact additional parts of Microsoft and they will help you get the refund using the link below: -.

  How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals

  http://support.Microsoft.com/kb/326246

  Hope this information is useful.
  Let me know if it worked.

  With regard to:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think

• NOOB needs expert advice to generate a HTML of a Cluster of Foreach

  Hi team, please help me, I'm not experienced enough to do the job. I have read 100s of items and guess I need a kind of function with return values. No idea how to do this.

  This script looks like just the total amount of resources by less affected cluster VMs, and then a few pieces for vSphere HA.

  

  Move the definition of the $report table and the creation of the HTML file outside the loop.

• Need of advise, which is the right driver for Pavilion dv6 Bluetooth?

  Hello!

  First of all, thank you for this forum, because I have found here the right steps to turn on the WiFi on my dv6

  The fact is, I a dv6 6101eg (win7 64 bit), and I don't have a good WiFi driver

  I can find a compilation of the Bluetooth drivers, but more than 10... This is why I need some advice, which to choose?

  Thank you in advance.

  Kind regards

  The Hungary Attila

  Hi, Attila:

  This one, since you have the Broadcom 4313 wireless card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94080-1&CC=US&DLC=en&LC=en&os=4063&Product=5128755&sw_lang=

  The Realtek device is your wired network adapter.

  Paul

• No need to advise - compare the date in *.sql with sysdate.

  Hi guys,.
  
  Need some help here.
  
  Someone has a script that will compare the date specified with the current sysdate. If previously, he will order that SQL * PLUS to leave immediately.
  The audit will be essentially in a script *.Sql. Whenever we run the script, @c:\script.sql, it will be first of all to compare the dates and decide whether to proceed with the rest of the codes (dml) below the date checker in the same script.sql
  
  Thank you

  I would like to combine the solutions of bencol and alberto:

  whenever sqlerror exit
  
  DECLARE
     v_date   DATE := TO_DATE('', 'YYYYMMDD');
  BEGIN
     IF v_date >= TRUNC(SYSDATE) -- or perhaps:  v_date>= sysdate
     THEN
       null;
     ELSE
       raise_application_error(-20000,'Date is before SYSDATE!');
     END IF;
  END;
  /
  
  whenever sqlerror continue
  
  -- rest of your script
  ...
  

  (not tested)

  Published by: hm on 08.05.2012 02:51

• Need expert help! CD player does not read the contents of the disc. Help!

  I searched and tried everything what we can imagine and impossible to find a solution. I can also restore because I don't really know this error at startup. Here are the symptoms and fixes I've tried. If there is someone out there who could help me it would be greatly appreciated!
  

  System:, I have XP w/SP3 installed. Dual-Core 3.0 G w / 3G P5N72T - MB Ram, HD 300 G, Asus CD/DVD Drive.

  Symptoms:

  • I had my CD player connected via PATA ribbon cable and my hard drive connected via a SATA cable.
  • My CD player will not autorun when an installation disc is installed.
  • My CD player will not read or display the contents of the disc when I use the file Explorer.
  • My letter of CD drive is D:\ and always appear as one of the discs.
  • When I use the command "run" and type: D:\install or D:\setup a windows "disk is not formatted" error appears stating "Windows is unable to read the disc. The disk might be corrupted or it could be in a form that is not compatible with windows.
  • My Green CD player will sweep on and I can hear it turn every time I try to explore the files or after I insert a disc, but she never autoruns, or displays content.
  • I decided to buy a new SATA CD drive and installed, unfortunately it does not work either exact problems remain.
  • I have two CD drives to another computer and they both work. So I know this isn't the disc or the lens.
  • I ran the utility Microsoft Fix It and she finds nothing wrong.
  • I ran the TweakUI to make safe autoplay features are on.
  • I did all the registry fixes proposed by microsoft and online forums. i.e. upper and lower, filters etc.
  • I removed the device from Device Manager and reinstalled.
  • I ran a virus, spyware, malware, and everything is clean.
  • I have the latest version of the system bios and all settings are fine. Most are on Auto that are associated with the detection.
  • Type of device DMA modes are selected in automatic detection.
  • If I could read a disc that I could try to reinstall windows XP, but it is not an option now until my CD player is fixed!
  • I don't have any installed like Nero buring CD software.
  • I actually installed Nero Light to see if it would read a disc, and of course I can see the disk and copy its content to my hard drive or take an image of the disk.
  • I tried to rename the drive, disconnect the drive.
  • I'm sure I tried other things, but can't remember right now!

  Thanks for your help in advance!
  Mike

  Hi msavage2000,

  It seems you have tried most of the steps to solve this problem. However, we would like to know if the drive does recognize the drive?

  As we know readers work, I would like you to try a new PATA/IDE cable and check the result.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need Expert help!

  Hello
  Three years ago, I bought my Hp Pavilion dv6-6070se from Dubai.

  A few problems that I face with my laptop:
  * Old games like gal St. third row
  * heating cell phone during normal use

  I was wondering about what can do to improve the performance and I have read the messages of the forum here and discovered that the majority of the upgrade of their hard drive SSD users and enhance their capacity of RAM.

  Can I upgrade my laptop? What are the things that I can pass in addition to SSD and RAM?
  What is 'disk cache' that everyone speaks of?

  Here are the specifications of your HP Pavilion dv6-6070se Entertainment Notebook computer.

  If the computer is heating and late development, you blow air through all the vents to remove all dust from the computer. This should be done every month. Please see HP Notebook PC - reduce the heat inside the PC to prevent overheating and PC portable HP-Fan is Noisy and runs constantly, PC is hotter than normal for normal maintenance and cleaning tips.

  Based on these specifications;

  1. this model comes with 4 GB of RAM and can be upgraded to a maximum of 8 GB of RAM.

  2. it has a 2.5 "SATA (7200 RPM) hard drive 500 GB and supports SATA SSD 2.5"

  3. He came with an Intel Core i7-2630QM processor 2.00 GHz (turbo SC up 2.90 GHz) (6, 0 - MB L3 cache, quad core, 45 W) CPU and can be upgraded to an Intel Core i7-2820QM processor 2.30 GHz (turbo SC up to 3.10 GHz) (8, 0 - MB L3 cache, quad core, 45 W) CPU.

  BIOS / settings control panel cannot be resolved to allow the game to use the "discreet" GPU This will result in the computer by using the "built-in" GPU

  A player of "cache" is a small mSATA SSD THAT practically related to a standard HARD drive in a RAID configuration. It does not appear that your model is compatible with this configuration. As a general rule, an SSD is going to be faster than an mSATA SSD / HDD HARD drive or hybrid configuration.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• need expert advice connection problems

  I have windows vista I tried to change my password must I couldn't now I can not on my computer, I am the only user on the computer and I do not have a backup disk, what can I doi have windows vista I tried to change my password must I couldn't now I can't on my computer I am the only user on the computer and I did not have a backup to disk which can make

  Hello

  1. what exactly happens when you try to connect? Do you receive an error message?

  2. you enter a correct password?

  I suggest you to try to connect with the old password to see if you can connect successfully.

   

  See also the article mentioned on the Microsoft Policy below we lost or forgotten the password.

  Microsoft's strategy concerning lost or forgotten passwords

  See also:

  What to do if you forget your Windows password

  Keep secure passwords - Microsoft strategy on move the passwords

• Need expert advice on the a4tech wireless mouse

  Lost the Nano - receiver Usb mouse A4tech G9 557fx, can I use my bluetooth usb 3.00 device other than the desired mouse receiver. Because they both have the same air.

  No, the mouse is not able to Bluetooth.

  Given that most of the wireless devices are particularly well coupled between the device and the receiver, it is doubtful that you can get a replacement.

  However, I would connect the mouse manufacturer.

  http://www.A4Tech.com/inquiry.asp

• Need to advise the XML menu

  I am trying to build a XML Driven Drop Down Menu similar to the one detailed in the tutorial in Kirupa.com. The difference is that instead of the menu item taking the user to another site, I want that he launch a SWF in a clip. Basically, what I'm trying to do, is to create a training application where the user clicks on a button (created from the XML file) and it starts a movie in a movie clip. Seems simple, but I couldn't find anything about it. All the tutorials involving XML menus have the URL launch buttons. Does anyone know of a tutorial or something that does something like what I'm after? Thank you.
  
  
  
  
  
  

  It worked perfectly. Thank you very much.

• Bad SQL performance, need to advise

  I'm having a problem with the following query:
  
  SELECT SHIPMENT_NUM
  SHIPPED_DATE
  FROM_ORGANIZATION_ID
  FROM_ORGANIZATION_NAME
  WAYBILL_AIRBILL_NUM
  EXPECTED_RECEIPT_DATE
  RECEIPT_NUM
  EMPLOYE_ID
  BILL_OF_LADING
  FREIGHT_CARRIER_CODE
  PACKING_SLIP
  SHIP_TO_LOCATION_ID
  SHIP_TO_LOCATION
  NUM_OF_CONTAINERS
  COMMENTS
  SHIPMENT_HEADER_ID
  LAST_UPDATED_BY
  LAST_UPDATE_DATE
  LAST_UPDATE_LOGIN
  CREATED_BY
  CREATION_DATE,
  PROGRAM_APPLICATION_ID
  PROGRAM_ID
  PROGRAM_UPDATE_DATE
  REQUEST_ID
  USSGL_TRANSACTION_CODE
  GOVERNMENT_CONTEXT
  RECEIPT_SOURCE_CODE
  ASN_TYPE
  VENDOR_SITE
  $VENDOR_NAME
  ATTRIBUTE_CATEGORY
  ATTRIBUTE1
  ATTRIBUT2
  ATTRIBUT3
  ATTRIBUTE4
  ATTRIBUTE5
  ATTRIBUTE6
  ATTRIBUTE7
  ATTRIBUTE8
  ATTRIBUTE9
  ATTRIBUTE10
  ATTRIBUTE11
  ATTRIBUTE12
  ATTRIBUTE13
  ATTRIBUTE14
  ATTRIBUTE15
  ROW_ID
  OF RCV_MSH_V
  WHERE rcv_msh_v.ship_to_org_id =: 1
  and (rcv_msh_v.shipment_header_id in (select rsl.shipment_header_id
  of rcv_shipment_lines rsl
  where item_id =: 2)) order of shipment_num, expected_receipt_date, shipped_date, shipment_header_id
  --------------------------------
  
  I looked on occasion and have add some tips to force the CBO to use vice complete sweep of the index table index scans. I also think that there is a problem with the UNION statement. The following view:
  
  CREATE or REPLACE VIEW FORCE rcv_msh_v (row_id
  shipment_header_id,
  last_updated_by,
  last_update_date,
  last_update_login,
  created_by,
  CREATION_DATE,
  program_application_id,
  PROGRAM_ID,
  program_update_date,
  request_id,
  ussgl_transaction_code,
  government_context,
  Comments,
  bill_of_lading,
  expected_receipt_date,
  freight_carrier_code,
  from_organization_name,
  num_of_containers,
  from_organization_id,
  $VENDOR_NAME,
  vendor_site,
  packing_slip,
  employe_id,
  receipt_num,
  receipt_source_code,
  shipment_num,
  shipped_date,
  ship_to_location,
  ship_to_location_id,
  waybill_airbill_num,
  asn_type,
  attribute_category,
  attribute1,
  attribut2,
  attribut3,
  attribute4,
  attribute5,
  attribute6,
  attribute7,
  attribute8,
  attribute9,
  attribute10,
  attribute11,
  attribute12,
  attribute13,
  attribute14,
  Attribute15,
  vendor_id,
  ship_to_org_id,
  vendor_site_id
  )
  AS
  SELECT rsh. Row_id ROWID, rsh.shipment_header_id, rsh.last_updated_by,
  RSH.last_update_date, rsh.last_update_login, rsh.created_by,
  RSH. CREATION_DATE, rsh.program_application_id, rsh.program_id,
  RSH.program_update_date, rsh.request_id, rsh.ussgl_transaction_code,
  RSH.government_context, rsh.comments, rsh.bill_of_lading,
  RSH.expected_receipt_date, rsh.freight_carrier_code,
  org.ORGANIZATION_NAME from_organization_name, rsh.num_of_containers,.
  RSH.organization_id from_organization_id, NULL, NULL,
  RSH.packing_slip, rsh.employee_id, rsh.receipt_num,
  RSH.receipt_source_code, rsh.shipment_num, rsh.shipped_date,
  HR.location_code ship_to_location, rsh.ship_to_location_id,.
  RSH.waybill_airbill_num, rsh.asn_type, rsh.attribute_category,
  RSH.attribute1, rsh.attribute2, rsh.attribute3, rsh.attribute4,
  RSH.attribute5, rsh.attribute6, rsh.attribute7, rsh.attribute8,
  RSH.attribute9, rsh.attribute10, rsh.attribute11, rsh.attribute12,
  RSH.attribute13, rsh.attribute14, rsh.attribute15, rsh.vendor_id,
  RSH.ship_to_org_id, TO_NUMBER (NULL)
  OF rcv_shipment_headers rsh.
  hr_locations_all_tl RH,
  org_organization_definitions org
  WHERE receipt_source_code IN ('INVENTORY', 'ORDER INTERNAL')
  AND hr.location_id (+) = rsh.ship_to_location_id
  AND human resources. LANGUAGE (+) = USERENV ("LANG")
  AND org.organization_id (+) = rsh.organization_id
  UNION ALL
  SELECT / * + index (top PO_VENDORS_U1) index (rsh RCV_SHIPMENT_HEADERS_N3) * /.
  RSH. Row_id ROWID, rsh.shipment_header_id, rsh.last_updated_by,
  RSH.last_update_date, rsh.last_update_login, rsh.created_by,
  RSH. CREATION_DATE, rsh.program_application_id, rsh.program_id,
  RSH.program_update_date, rsh.request_id, rsh.ussgl_transaction_code,
  RSH.government_context, rsh.comments, rsh.bill_of_lading,
  RSH.expected_receipt_date, rsh.freight_carrier_code, NULL,
  RSH.num_of_containers, TO_NUMBER (NULL),
  POV. $vendor_name $vendor_name, povs.vendor_site_code vendor_site,
  RSH.packing_slip, rsh.employee_id, rsh.receipt_num,
  RSH.receipt_source_code, rsh.shipment_num, rsh.shipped_date,
  HR.location_code ship_to_location, rsh.ship_to_location_id,.
  RSH.waybill_airbill_num, rsh.asn_type, rsh.attribute_category,
  RSH.attribute1, rsh.attribute2, rsh.attribute3, rsh.attribute4,
  RSH.attribute5, rsh.attribute6, rsh.attribute7, rsh.attribute8,
  RSH.attribute9, rsh.attribute10, rsh.attribute11, rsh.attribute12,
  RSH.attribute13, rsh.attribute14, rsh.attribute15, pov.vendor_id,
  RSH.ship_to_org_id, rsh.vendor_site_id
  OF rcv_shipment_headers rsh.
  hr_locations_all_tl RH,
  po_vendors pov,
  POVs po_vendor_sites
  WHERE (receipt_source_code = 'SELLER' AND rsh.asn_type IN ('CRASH', "ASBN")
  )
  AND hr.location_id (+) = rsh.ship_to_location_id
  AND human resources. LANGUAGE (+) = USERENV ("LANG")
  AND pov.vendor_id = rsh.vendor_id
  AND povs.vendor_site_id (+) = rsh.vendor_site_id
  - AND (EXISTS)
  AND (1 (IN)
  SELECT 1
  OF rcv_shipment_lines rsl
  WHERE rsl.shipment_header_id = rsh.shipment_header_id
  AND IN rsl.shipment_line_status_code
  ("EXPECTED", "PARTIALLY RECEIVED", "FULLY RECEIVED")
  AND NOT EXISTS)
  SELECT 1
  BY rcv_transactions_interface rti
  WHERE rti.shipment_line_id =
  RSL.shipment_line_id))
  );
  
  --------------------------------------------------------------
  
  Any help/advice would be greatly appreciated.
  
  Greg
  
  Published by: user3581064 on August 4, 2010 09:47

  Please read these:

  When your query takes too long
  When your query takes too long...

  How to post a SQL tuning request
  HOW to: Validate a query of SQL statement tuning - model showing

• Hello! I have a laptop HP Compaq 6730 s with a windows XP SP2 OS. I need help with my drive burning/writing speed CD/DVD and its ability to play DVD. __

  There an Optiac DVD RW AD-7561 pilot. Before it used to have a 8 X read speed and a 8 X write speed, I can see via NERO everytime I have will burn a DVD. But now the writing speed has become 2 X and therefore more adjustable from a NERO software. And also I tried to burn a DVD every time, he finished but it does'nt displays data that has been burnt at all... I already tried to uninstall this software, rebooted and installing it, thinking that this might well be the cause of the problem, but it's always the same. I even tried to install Roxio 9, hoping that this will solve the problem, but it still shows the same write speed 2 X... His ability to read and burn to a CD is fine, but the problem is when it comes to DVD's just makes a strange noise and takes a long time before displaying the content of the DVD and its ability to burn a data file on a DVD...

  Before this problem occurred, I remember I have inserted a DVD and tried to copy paste its content on my desktop. But while the copy is in progress, I accidentally typed on the eject button while trying to reach for my cell phone, which was placed next to the my laptop cd/dvd drive.

  IM desperate and I need an experts'advise on what to do...

  Thanking you in advance,
  Kirby baki
  KSA

  Hello k. Baki.

  Thank you for your message.  Click HERE to download/install the driver for your device.  There is also a link available at HP that is specifically for the update software to use the Service Pack 2.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• WAG160N turn on no lights at all except LAN while... NEED HELP!

  My WAG160N did not work properly while I'm at home it's afternoon... it can not connect to internet or the wireless signal also never see the upward.

  It was raining before I'll be back at home, but I don't know I turn off the main switch on the modem, but the dsl cable I is not entered, any possibility that the storm will hit it in tis situation?

  NEED expert to give me some advises THX...

  So if the power light on your router is not cover, this means that your router is not working. Maybe you can check with Linksys, if your router is under warranty then you can get the replacement of your router or do you need to buy a new router.