Need help to restore a file.

Similar Questions

• I need help to restore a file that I saved on a CD? Just the basics will help you.

  I have a skeleton of my Microsoft Money file on my hard drive.  I have my information saved on a floppy disk, but also a CD.  Just, I don't know how to restore the file and can not seem to find it anywhere.  Thank you.

  Copy files from a CD-ROM to a hard drive

  To copy files from a CD-ROM to a hard disk:

  1. If you already have a folder on your hard disk to contain the files from your CD-ROM, note the full path to your folder (for example, C:\Pictures, D:\Images, and so on) and proceed to step 2. If you do not have a folder for your files, create a new folder:
     1. Click Start, point to programs, and then click Windows Explorer.
     2. Click on the hard drive to contain the new folder. On the file menu, point to new, and then click folder.
     3. Type a descriptive name for your folder and press ENTER. For example, if you want to copy the image files on your hard drive, you can name the folder images, Images or another descriptive name. Note the full path to your folder (for example, C:\Pictures, D:\Images, and so on) and then close Windows Explorer.
  2. Click Start, point to programs, and then click MS-DOS prompt.
  3. At the command prompt, navigate to the CD-ROM drive, and then navigate to the folder that contains the files to be copied. For example, if you want to copy the files in the folder of the drivers on the Windows 98 CD-ROM and your CD-ROM drive is drive D, type the following commands, pressing ENTER after each command:
     d:
     cd\
     Drivers CD
  4. Copy the files from the source to the CD folder in the folder on your hard drive. To continue the previous example, if your source folder is the folder of the drivers on the Windows 98 CD-ROM, your CD-ROM drive is drive D and you want to copy files to the C:\Drivers folder, type the following commands, pressing ENTER after each command:
     Copy *. * c:\drivers
     output

  http://support.Microsoft.com/kb/259252

• Need help to restore backup files

  I had to change to XP Pro to XP home.  Pro, I backed up all my files on external hard drive, but now I can not install the BKF homepage file... Help

  Thanks for answering my question, but I managed to fix the problem. By browsing this site, I KNEW XP home had a program, you could add from the backup drive. I installed and whallah, pictures and music installed etc.
  Before that, I could not access the file, I got was a message... windows does not recognize this file. Thank you thank you for taking the time to try to help.

• My hp s3321PC Virginia-PC on safe mode and has been hacked, I don't have the recovery CD, I need help to restore at least it ' s factory settings. Thanx

  My hp s3321PC Virginia-PC on safe mode and has been hacked, I don't have the recovery CD, I need help to restore at least it ' s factory settings. Thanx

  See the manufacturer's web page for detailed instructions on 'Factory Restore'.

• Need help on transfer of files from one server to another server.

  Hi all
  
  I need help on transfer of files from one server to another server (Unix box to another Unix machine) using jdeveloper and BPEL process.
  
  I'm new to these technologies, can you please help me on this. If you encounter documents please share it with me.
  
  We use BPEL and Jdeveloper 10.1.3.3.0 version
  
  Thanks in advance!
  
  Concerning
  Vincent
  
  Published by: user10263255 on 15 Sep, 2008 12:25

  Vincent,

  One of the options I can think of is creating mount points on the boxes of unix and then using the File adapter.

• Need help importing music mp3 file to my windows movie maker

  I've added music files to my films on windows, Director of music from cd that I ripped to my Windows Media Player, never had any problems.

  Today, I bought several songs from Amazon mp3 in order to add to my Windows Movie maker, and they will not import the Windows Movie Maker program.  They play on my Windows Media Player, however, will not import Windows Movie Maker.  The files say they are mp3 files and Windows Movie Maker says he takes these files, however, I get aRED X and the message 'could not be imported'.  Help!  What can I do to get these files to import to my movie on Windows Movie Maker.

  Thank you...

  I put the questions about music and its forum.  I really need help importing MP3 files that I just bought today from Amazon for the sole purpose to add to my movies in Windows Movie maker.

  In the past I have imported music music files that I ripped to CDs.  Now, today, I tried to import music files MP3 to Windows Movie Maker and it will not import files.  I get a message says"could not be imported" and a RED X.  Window Movie Maker, says it accepts MP3 files, but it does not accept these MP3 files.  Help!

  Thank you...

  ======================================
  Movie Maker may have problems of compatibility with MP3
  files... may be worth a try to convert MP3 files
  to WMA before you import into Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory (the file you want to download is: > FFSetup260.zip
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your MP3 clips on the main screen...

  Select "while"WMA"/ OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I need help to open a file. __

  I have an ASPX file that I can't open. Windows said I had ak help the sender what program I use, however I can't do until Monday and I really need open this file...  What can I do?  Somebody help please...

  You should be able to open the file in Internet Explorer or another browser that you use http://www.fileinfo.com/extension/aspx.  If it does not open, you may need to set the file association.

  You may need to add aspx for file associations.  Do so right click on the file and select open with and then select Choose default program.  Select among the options provided, or if your browser is not listed select Browse and search the executable program for your browser (you should be able to get a hint by a right-click on the browser shortcut and selecting Properties and then look at a target).  Make sure that the default program.  Then the file should open in the browser.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help with the batch file command - move all files/folders

  I need help creating a simple batch file that performs the following operations:

  Move all files AND folders in a source folder to a target folder. The source folder will be mklinked with the target folder and an infinite loop can be possible, not sure if any order would be necessary here to avoid this? Executed once A thing, or a thing to stop?

  It comes to free up space on an SSD by iTunes forced location for backups and apps to be physically on another HARD drive, but available as if it were in default location.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Hello I need help for OCR multiple files

  Hello I need some help for OCR multiple files and I found that batch OCR multiple should be the solution, but I can't with Adobe Acrobat Pro DC. Pleas help me

  You will find in the Action Wizard.

• I need help you rename a file using regular expressions in Bridge.

  Hello

  I work at a University, and we are working through files for our theses and Dissertations. We were renamed to make them more coherent. I wonder if there is a regular expression that could help in this process?

  Examples come from current file names;

  • THESIS H343G 1981
  • Thesis of 1981 g996e
  • THESIS-1981-A543G

  I just need to change the actual file names. how they are formatted.

  Where appropriate on the thesis.

  Hyphens (-) in all white space.

  First letter, last letter is lower case on appeal no (H343g)

  If the list above should look like;

  • Thesis-1981-H343g
  • Thesis-1981-G996e
  • Thesis-1981-A543g

  I've seen people do some pretty cool things with regular expressions! Any help would be greatly appreciated. Thank you!

  You would be better to use a script to do this as an example because I don't think it would be possible in the new name of bridge.

  Using ExtendScript Toolkit or a text editor to copy the code in any event and save it to sub Filename.jsx

  This must be recorded in the appropriate folder. It is located by going to preferences in Bridge, select Startup Scripts, this will open the folder where the script should be saved.

  Once this is done close and restart Bridge.

  Usage: Goto the Tools Menu and select Rename PDF files

  Be sure to only test the code with some files copied to a separate first folder to make sure it's what you want.

  The script will make all PDF files in the selected folder.

  #target bridge
  if( BridgeTalk.appName == "bridge" ) {
  renamePDFs = MenuElement.create("command", "Rename PDFs", "at the end of Tools");
  }
  renamePDFs.onSelect = function () {
  app.document.deselectAll();
  var thumbs = app.document.getSelection("pdf");
  for( var z in thumbs){
  var Name = decodeURI(thumbs[z].spec.name);
  var parts = Name.toLowerCase().replace(/\s/g,'-').match(/(.*)(-)(.*)(-)(.*)(\.pdf)/);
  var NewName = parts[1].replace(/^[a-z]/, function(s){ return s.toUpperCase() });
  NewName += parts[2]+parts[3]+parts[4]+parts[5].toUpperCase().replace(/[A-Z]$/, function(s){ return s.toLowerCase() });
  NewName += parts[6];
  thumbs[z].spec.rename(NewName);
      }
  };
  

• Need help with my Flash file

  My continuous flash file in a loop at the end of my stop ignoring and defer orders.

  It works perfectly until the last frame/command. I want it loop to the first image, and for this, but then the movie will not properly there after. Is there anyone who can help me with this file, please?

  Thanks for your time.

  Here's what the file looks like

  http://safarianimals.freeiz.com/2010_FHNRZ_Header.html

  Here is the swf file

  http://safarianimals.freeiz.com/2010_FHNRZ_Header.swf

  Here you can download the original FLA file

  http://CID-04caffbb2769932f.SkyDrive.live.com/self.aspx/Flash%20HELP/2010 ^ _FHNRZ ^ _Header.f the

  Thanks for the help

  Here ya go Linda.  This has proved to be a little more work than I anticipated, but not too bad.  This is because I thought I was just able to enter and change what you had, but I didn't understand how you did, or really know anything on the as2, so I just redid it.  Images are resized and I think it does what you want.  Take a peek.  Everything is controlled by AS3, there is nothing on the stage of the timeline.

  I did a lot of comments, but let me know if you need any help to understand the logic and flow to tweak it for your own use.

  Here is the HTML link:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.htm l

  The SWF file:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.swf

  The CS3 fla file:

  http://www.GTCC.edu/distance/learning_objects/Flash/test/Linda/2010_FHNRZ_HeaderCS3_IQ.fla

• Need help to restore Iphone recycled with no password

  Hello, I received a recycled locked Iphone no password need help. Downloaded Itunes followed instructions nothing and I have no company of cells still need help. J.

  You must use a SIM card to activate the phone

  IF the phone is locked - so it must be a carrier card

  IF the carrier unlocked - any SIM card will do

  There is no need for a new SIM card

• Need help in the XSLT file

  Hello

  Need help to come up with a construction xsl. Am using SOA 11.1.1.5. I have the underside of the input samples

  < root element >

  < location >

  < Location_id > Location_ID10 < / location_id >

  < Location_Code > Location_Code11 < / Location_Code >

  State12 < of State > < / State >

  < / location >

  < location >

  < Location_id > Location_ID13 < / location_id >

  < Location_Code > Location_Code14 < / Location_Code >

  State12 < of State > < / State >

  < / location >

  < location >

  < Location_id > Location_ID16 < / location_id >

  < Location_Code > Location_Code17 < / Location_Code >

  State18 < of State > < / State >

  < / location >

  < location >

  < Location_id > Location_ID91 < / location_id >

  < Location_Code > Location_Code91 < / Location_Code >

  State19 < of State > < / State >

  < / location >

  < location >

  < Location_id > Location_ID92 < / location_id >

  < Location_Code > Location_Code92 < / Location_Code >

  State19 < of State > < / State >

  < / location >

  < / root >

  Here is what I tried for expected output

  < ns0:root >

  < ns0:Categories >

  < ns0:Category >

  < ns0:CategoryValue >

  < ns0:CategoryValue >

  < ns0:Name > visits12 < / ns0:Name >

  < ns0:Code > visits12 < / ns0:Code >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID10 < / ns0:Name >

  < ns0:Code > Location_Code11 < / ns0:Code >

  < / ns0:CategoryValue >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID13 < / ns0:Name >

  < ns0:Code > Location_Code14 < / ns0:Code >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < ns0:CategoryValue >

  State18 < ns0:Name > < / ns0:Name >

  State18 < ns0:Code > < / ns0:Code >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID16 < / ns0:Name >

  < ns0:Code > Location_Code17 < / ns0:Code >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < ns0:CategoryValue >

  < ns0:Name > State19 < / ns0:Name >

  < ns0:Code > State19 < / ns0:Code >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID91 < / ns0:Name >

  < ns0:Code > Location_Code92 < / ns0:Code >

  < / ns0:CategoryValue >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID91 < / ns0:Name >

  < ns0:Code > Location_Code92 < / ns0:Code >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < / ns0:Category >

  < / ns0:Categories >

  < / ns0:root >

  But here's what I mean I know there is a problem with xslt, but I'm hard to fix if need help

  < ns0:root >

  < ns0:Categories >

  < ns0:Category >

  < ns0:CategoryValue >

  < ns0:CategoryValue >

  < ns0:Name > visits12 < / ns0:Name >

  < ns0:Code > visits12 < / ns0:Code >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID10 < / ns0:Name >

  < ns0:Code > Location_Code11 < / ns0:Code >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < ns0:CategoryValue >

  State18 < ns0:Name > < / ns0:Name >

  State18 < ns0:Code > < / ns0:Code >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID16 < / ns0:Name >

  < ns0:Code > Location_Code17 < / ns0:Code >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < ns0:CategoryValue >

  < ns0:Name > State19 < / ns0:Name >

  < ns0:Code > State19 < / ns0:Code >

  < ns0:CategoryValue >

  < ns0:Name > Location_ID91 < / ns0:Name >

  < ns0:Code > Location_Code91 < / ns0:Code >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < / ns0:Category >

  < / ns0:Categories >

  < / ns0:root >

  It is ignored if the previous value same as current as if the previous value even running as I want to nest under the same node, as shown above in the expected results.

  Here's xslt I have so far

  ................

  ...........................

  ......

  < xsl: template match = "/" >

  < ns0:root >

  < ns0:Categories >

  < ns0:Category >

  < ns0:CategoryValue >

  < xsl: for-each select = "/ tns:Root - element / tns:Location [not (previous - sibling:tns:Location / tns: State = tns: State)]" >

  < ns0:CategoryValue >

  < ns0:Name >

  < xsl: value-of select = "tns: State" / >

  < / ns0:Name >

  < ns0:Code >

  < xsl: value-of select = "tns: State" / >

  < / ns0:Code >

  < ns0:CategoryValue >

  < ns0:Name >

  < xsl: value-of select = "tns:Location_ID" / >

  < / ns0:Name >

  < ns0:Code >

  < xsl: value-of select = "tns:Location_Code" / >

  < / ns0:Code >

  < / ns0:CategoryValue >

  < / ns0:CategoryValue >

  < / xsl: foreach >

  < / ns0:CategoryValue >

  < / ns0:Category >

  < / ns0:Categories >

  < / ns0:root >

  < / xsl: template >

  < / xsl: stylesheet >

  Thank you.

  You use xslt-style in this kind of case of grouping:

  Try just below xslt:

  http://www.w3.org/1999/XSL/transform.

  xmlns:ns0 = "France" >

  'State' >

  Please answer if it works for you.

• Just lost months of work... need help to restore.

  I'm working on a 600-page document.  I just lost 540 pages!  Imported images when the program decided to start doing something... I don't know what.  I waited, and then when he did thought, ' uh, I better save my work, which was a little strange, click command S. "then I noticed that it had removed 540 text links and their content.  Can we recover them... Please say yes!  I am on a deadline and will not complete this project if I can't get back.  Now, before you ask, "no, I don't have my Time Machine.  Do not scold, I'm just tired of him always interrupt my work.  I can rethink this strategy. »

  So the question is: is there a previous version on my computer and I can access?

  Please contact me as soon as possible because I'm really in a bind.

  Thank you.

  Laura Breite

  San Diego, CA

  I thank God for DropBox.  As a result wonderful ability of DropBox to capture images every time that the file is saved, I was able to restore my file.  I'm back in business.  I hope that this information may be useful to someone else.  Yes!  DropBox!

• Need help urgent to share files

  I can't find a toolbar to share my downloaded files. One seen does not match the one in the tutorial.

  I need to get out the files immediately. How can I get this accommplished?

  Sorry about that, I misread your original question. Yes sharing left gray box dark on the right to a button on the right just to the left of the sidebar. Clicking on it will bring up a dialog box to share.