Need help with an order line shaped PowerCLI to follow development snapshots

Similar Questions

• need help with an order first level using LABVIEW PID control process.

  As the program begins to run the PV value also increase when it reaches the SP is not settledown instead it stops.

  Have you tried on the NEST? There are a bunch of examples here on the forum

• Need help with a SQL query

  Hello

  I have a data in table (raj_table) with columns (char11) raj_id, raj_number (varchar2 (15)), raj_format (NUMBER), Primary_ID (identity with the values of the primary key column)

  Primary_ID raj_id Raj_number Raj_format

  1                            raj                 rajvend                      1

  2                            raj                 rajvend                      1

  3                            raj                 rajvendor1                 2

  4                            raj                 rajvendor1                 2

  5                            raj                 rajvendor1                 2

  6                            raj                 rajvendor2                 3

  I used under SQL to get query output as below, but has not achieved the required result:

  Select client_id vendor_number, vendor_format, primary_id, row_number() on sl_no (client_id partition, primary_id, vendor_format order of client_id primary_id, vendor_format, vendor_number, vendor_number)

  from raj_table by sl_no asc

  SL_NO raj_id raj_number raj_format primary_id

  1                   1                   raj              rajvendor                 1

  1                   2                  raj              rajvendor                 1

  2                   3                   raj              rajvendor1                2

  2                   4                   raj              rajvendor1                2

  2                   5                  raj               rajvendor1                2

  3                   6                    raj              rajvendor2                3

  I need help with a SQL query to get the result as above without using the group by clause. I want to bring together the combination of separate line of the three columns (raj_id, raj_number, raj_format) and add a unique serial number for each online game (SL_NO column below). So, above there are 3 unique set of (raj_id, raj_number, raj_format) I can get in a group by clause, but I can not add prmiary_id, SL_NO values if I group by clause. I used the analytical functions like row_number() but no luck. Need solution for this.

  with t as)

  Select 'raj' raj_id, 'rajvend' raj_number, 1 raj_format, 1 primary_id Union double all the

  Select option 2, 'raj', 'rajvend', 1 double Union all

  Select 3, 'raj', 'rajvendor1', 2 double Union all

  Select 4, 'raj', 'rajvendor1', 2 double Union all

  Select 5, 'raj', 'rajvendor1', 2 double Union all

  Select 6, 'raj', 'rajvendor2', 3 double

  )

  Select dense_rank() over (order of raj_id, raj_number, raj_format) sl_no,

  t.*

  t

  order by primary_id

  /

  PRIMARY_ID RAJ RAJ_NUMBER RAJ_FORMAT SL_NO
  ---------- ---------- --- ---------- ----------
  1 1 raj rajvend 1
  1 2 raj rajvend 1
  2 3 raj rajvendor1 2
  2 4 raj rajvendor1 2
  2 5 raj rajvendor1 2
  3 6 raj rajvendor2 3

  6 selected lines.

  SQL >

  SY.

• Need help with query Cumulative difference

  Hi all

  I need help with a query and my requirement is as below

  {code}

  ROWNO

  ORDERS

  VALUE

  1	10	900
  2	11	700
  3	12	500
  4	13	400

  {/ code}

  I have need to query which will display the cumulative difference for example I value tell 10000 numbers opening

  now I need for each of the lines of cumulative difference

  {code}

  ROWNO ORDERS DIFF

  1 10 10000 - 900 = 9100

  2 11 9100 - 700 = 8400

  3 12 8400 - 500 = 7900

  4 13 7900 - 400 = 7500

  {/ code}

  WITH commands LIKE (10 SELECT order_id, 900 double UNION ALL val
  11. SELECT, 700 FROM dual UNION ALL
  SELECT 12, 500 FROM dual UNION ALL
  Select 13, 400 double)

  SELECT row_number() over (ORDER BY order_id ASC) AS rowno
  order_id
  sum (val) 10000 - OVER (ORDER BY order_id ASC) AS diff
  orders

  /

  HTH

• Newbie needs help with cookie cutter in PSE8

  I'm new to PSE8, the cookie cutter tool and work with layers, what I need help with to accomplish what I want to do.

  I want to use one form of cookie cutter to make several 'holes' in an image, leaving a solid color background layer to show through. (Or another path, use the form of Cutter of biscuit as a solid 'rubber stamp' color to stop shape on the image in several places)?

  I opened my image in the editor and create a solid color fill layer, and then I select the shape of Cutter of biscuit that I want to use, for example a sheet.  Then I select the color fill layer, click and drag to create the sheet randomly somewhere in it.  When I release the mouse button, the window returns to the image and there is the leaf, locked in a box, in the color I want, on the image. I drag the box (leaves) to where I want it and click the green checkmark to accept. So far so good.  Here's the problem: in order to create another sheet on the image, I have to create another layer of fill and repeat the whole process.  If I try to use the same fill layer to a second sheet, the first sheet disappears.  I must be missing something very simple, but I can't figure out how to get out several sheets of a filling layer.  Also, I use a version without the constraint of the sheet because I would create several sheets of different sizes out of the fill layer as well.

  I would be grateful for any help or suggestion!

  Try the following:

  1. File > new > empty file - white
  2. Create a new layer, fill it red
  3. Create a new layer, fill it out of blue
  4. Access the marquee tool, drag the rectangle to the blue layer. You should see "ants in market". Press DELETE on the keyboard.  You should see red in the rectangular hole.
  5. Access to the custom shape (U) tool. In the form of culture library, select the heart shape black all and hang out on the blue layer. Press CTRL + left click the thumbnail of the layer of the capping layer for "mobile dotted." Hit delete on keyboard twice, and you should see red in the heart shaped hole.
  6. Continue with other forms.

  

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• Need help with a query result

  Oracle Version: 11.2.0.2.0

  I need assistance with the output of the query. Here is the table.

  With Tbl_Nm as

  (

  Select 'ABC1' SYSTEM_ID, REGION 'US', 'CHI' SUB_REGION 4000 BALANCE, to_date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') LAST_UPD_TIME, 'A' FLAG of union double all the

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select * from tbl_nm

  I need the output below.

  PQR2 UK MC 2600 1 OCTOBER 2012 04:45

  ABC1 US NY 3500 October 1, 2012 06:45

  LMN3 UK BT 2500 November 1, 2012 07:45

  The need the disc according to this system_id flagged as "A". But if the last disc of 'd' then it must show that the amount, but the file should be displayed in 'A '.

  I've tried a few and got stuck. Help, please. Not able to get a balance '.

  This question is a bit similar to needing help with a query result

  With Tbl_Nm as

  (

  Select 'ABC1' System_Id, region 'US', 'CHI' Sub_Region, 4000 balance, To_Date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') Last_Upd_Time, 'A' flag of double Union All

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select System_Id, region, Sub_Region, Balance, Last_Upd_Time of Tbl_Nm T1

  where t1. Last_Upd_Time = (select max (Last_Upd_Time) in the Tbl_Nm T2 where T1.) SYSTEM_ID = T2. SYSTEM_ID)

  So maybe you'd then

  ORDER BY DECODE(flag,'D',9,1) ASC...

  to get the Ds at the end of the list.

  or

  ORDER BY CASE WHAT flag = has ' (your other filters) AND then 9 or 1 end CSA,...

  HTH

• Need help with mobile layout

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match these mobile Office layouts

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  I used heights in the header because I'll have code for desktop, mobile and tablet in the CSS so it changes (and do not know how to support better). Also need to Add a link to the logo image background in header.

  Thanks in advance!

  TheOriginal150mph wrote:

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match thesemobile Officelayouts     

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  Commenting on just a habit of property changing the css if you have defined it for the desktop version. Your nav elements are not vertically Center because you have a bottom padding set on them for the office, there are only changes for mobile in your css media query.

  .main-nav a {}

  display: block;

  text-decoration: none;

  / * padding-bottom: 15px;   */

  Padding: 12px 0;

  }

  Change the properties for the .product-images for mobile boxes: you have float attached to them for the desktop version and which cascade down to the mobile version, unless you change in the media query:

  .product-image {}

  float: none;

  Width: 50%;

  margin: 0 auto 20px auto;

  }

  As I mentioned in one of my posts related to your project, you will probably have to make your product images a bit larger. They fill the area once they form a column to width of 768px screen or you could resist transform them to one column until a little more by using a media query extra set at a narrow screen width to evoke this action

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Need help with image fusion

  Hello

  Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.

  For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.

  Here are two pictures that I'm trying to mix.

  

  I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.

  Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.

  Here is a fairly simple method:

  First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)

  Mask on white background of the brain and turn the image to 0% of saturation.

  Put the brain on basketball on its own layer. Make the overlay blend mode.

  Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.

  -Now, you have a brain in a basketball, but the brain is a bit too subtle.

  Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).

  You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.

  

• Need help with Dreamweaver Divs

  
  This is a clip of my site that I do, is not yet online.
  But what I need help with the div, as you can see the div with the blue text overlaps a Fireworks html banner I made.
  Anyway I can fix this so that the Fireworks banner goes over the div instead of the other way around?
  Any help is thanked!

  It is a problem with the stacking order.  Your division of the blue text takes precedence over your menus rollover.

  Please read on z-index.

  http://www.smashingmagazine.com/2009/09/15/the-z-index-CSS-property-a-comprehensive-look/

  For answers, we need a link to the page to test your site.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Need help with this gallery of xml!

  I have build a gallery but its very simple... There are pictures of the xml file.

  I have attached all the zip files.

  I just want two things if anyone can help.

  first of all when I press the next button, he's going to the next image, but without effect. It just displays the following image... I want to incorporate the effect of dragging when the image is changed to another.

  and secondly, I want to use the AutoPlay feature.

  Once swf starts images came one by one with a vertical drop of a few seconds.

  Thanks in advance... I really need help with this..!

  For the look of sliding effect using the actionscript class Tween.  Allows you to create motion tweens using the code.  The example below will be tween property _x of the instance named anObject from 0 to 300 in 3 seconds...

  import classes before using

  Import mx.transitions.Tween;
  Import mx.transitions.easing.Regular;

  TW var = new Tween (anObject, "_x", Regular.easeIn, 0, 300, 3, true);

  To implement an enforcement function auto you need to import all the images first, in the order, then you will need to use form any controlled timer, such as setInterval (with clearInterval not to need) in order to have things turn on automatically by some part-time