need to align top box

Hello. I was wondering if anyone has a quick minute to look at this page and tell me how to get the date numbers divs to align to the top of the table cell. I had correct before, but made a few other changes: general cleaning of the html browser/validation that came back with compatibility

"Support for the top, the top of the text, middle, low values and of the text-bottom of the vertical-align property is incomplete; These values may not produce the desired effect.
Affects: Internet Explorer 5.5; Internet Explorer for Macintosh 5.2 "

Do not think, I deleted it then realized that it was necessary, he put back in...

Now it does not work, I tried a lot of things and this is the second time that this has happened.

http://www.oakcitygrille.com/cal_march_09.html
http://www.oakcitygrille.com/general_form.CSS

Thanks in advance for your time.

Jen

> Affects: Internet Explore 5.5; Internet Explorer for Macintosh 5.2 "

Why are you even check for these nasty things?

And why are you using all of these styles of position: relative? On .
Tags? Wow.

In any case, just do.

TD {}
border: thin solid #B54221;
/ * position: relative; * /
border-collapse: collapse;
height: 100px;
vertical-align: top;
}

I did wonder why so many styles of position: relative?

--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
==================

"jennlmont" wrote in message
News:gomnst$4a4$1@forums. Macromedia.com...
> Hi there. Just wondering if anyone has a quick minute to look at this
> page and
> Tell me how to get the numbers divs date to align to the top of the table
> cell phone.
> I had correct before, but made a few other changes: general cleaning of
> html,.
> browser/validation that came back with compatibility
>
> "Support for the top, the top of the text, middle, low values and of the low-text of.
> the
> Vertical-align CSS property is incomplete; These values may not produce
> the
> for effect.
> Affects: Internet Explore 5.5; Internet Explorer for Macintosh 5.2 "
>
> Not think I deleted it then realized that it was necessary, he put back in...
>
> Now, it won't work, I tried many things and it is the second
> time
> It happened.
>
> http://www.oakcitygrille.com/cal_march_09.html
> http://www.oakcitygrille.com/general_form.css
>
> Thanks in advance for your time.
>
> Jen
>

Tags: Dreamweaver

Similar Questions

  • Top box booklet

    Hello

    My Libretto U100 top box is silver and white. However, I ve seen pictures on the Internet of a U100 with a blue suitcase. Are there several models of Libretto´s U100 with different colors?

    Another doubt, what Holster do you recommend for a Libretto U100?

    THX

    Hi, Juan Jose

    Nice name :)
    Unfortunately, I put t have exactly the color of case information. But I don t think that Toshiba laptops have more than two colors. However, you can ask the service partner or the official dealer for more information. Second, I found the cases for your device.

    For 15 screens
    Reference number:
    PX1181E-1NCA
    PX1183E-1NCA
    PX1185E-1NCA
    PX1186E-1NCA

    For 17 screens
    Reference number:
    PX1187E-1NCA

    If you need more information about the compatible parts, you can visit the Toshiba site:
    http://EU.computers.Toshiba-Europe.com

    Good bye

  • Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

    I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

    I read your question. I asked you what happened when running
    TV Setup and specifically want to know if the TV Setup detected your set top
    Box/decoder and it happened. If Media Center does not automatically detect your decoder,
    have you tried the manual method to learn codes? I'm trying to help you
    features of Media Center EPG.
     
    You must ask the FIOS people if they have the equivalent of a DTA
    offered in the world of cable and OTA.
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     
  • "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

    Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

    I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

    Ron, I have something for you!

    and for all the people who have this problem :)

    Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

    Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

    The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

    Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

    My TV works and looks okay now.

    It actually works!

    the only problem is that it is not in HD

    but there is something


  • How to create a top box curve?

    I use CS5.1.  I generally use illustrator to push pictures around, scale, crop, etc. for basic stuff.  I never actually get away with it.

    I'm creating a letterhead and want to be a couple of bows and not a square to the top box.  I need to create a private image so that I can lighten the background image to my taste.  So what is the best way to change the top of the box to resemble the image included?  Photoshop has point 3 arcs, but I can't do in Illustrator.  I would continue to confuse everything around until I have to figure it out, but I need that's in the morning.

    Thank you.example.jpg

    Learn how to use the pen tool.

    You can draw this shape with 5 clicks for the acute angles and 2 click-trolling for the corners rounded.

    Use the SHIFT key to constrain the angles and keep things straight.

    Before you begin, press Cmd / Ctrl + R to get leaders to view, and then drag to the bottom of a guide of the rule at the top of the page.

    Start in the upper left corner, click on the guide.

    Hold the SHIFT key, move the mouse to the bottom and click to the lower left corner.

    With Shift pressed, move the mouse to the right and click to the lower right.

    With Shift key, move the mouse to the top and click to see the upper right.

    With Shift pressed, move the mouse to the left and click-and - drag to the left to the next anchor point.

    Release the SHIFT key.

    Click and drag to the left to guide and hold the Shift key.

    Click on the first anchor point to close the path.

  • Toshiba WL863 takes too long to start and its Set Top box problem

    Hello

    Aside from no YouTube on the TV - is not a real question

    I have 2 problems with WL863 TV:

    1. the TV takes long time to turn on (between 2.5 and 4 minutes).
    2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

    I use the latest firmware.

    This would have something to do with the settings, or do I have to send the TV for repair under warranty?

    Please give some suggestions.

    Thank you

    > 1. The TV takes time to market (between 2.5 and 4 minutes).
    Have you noticed that in the past, or the first day of purchase?

    If not, I recommend you load the default settings (reset) TVs and check it again.
    In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

    > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

    This problem could be linked to the connected Set Top Box and not the TV device.

    TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

  • Need help aligning the SSD to install Windows XP Pro (32 bit)

    OK, I scoured the internet for help on this one - I'm a newbie to SSD - so having to manually align the partitions and find FITTINGS utilities to take care of the "Crusher" is all new to me - so the answers I found on the net were to "over my head" for my last neuron remaining cope!

    The machine is an Asus Eee PC 901/XP - that belongs to a friend of mine. These netbooks have 1 x 4 GB SSD and 1 x 8 GB SSD - I installed XP Pro SP3 on the 8 GB and got to boot from it - only problem is not only slow, but essentially unusable in this same open my computer with no other progs running takes a good 30-45 seconds - and actually run the progs just cripple it.

    After checking the CPU in Tsk Mgr was sod all, that there is plenty of available RAM (I upgraded to 2 GB = max mobo aura), I can only imagine that - now that I've done some reading on these SSDS - the (main?) cause of the non-existent performance is the fact that I have (in my ignorance) doesn't have to align the partitions before installing the operating system.

    I got a 8 GB disk image - using a prog called 'Snapshot' - as I read it, I should be able to then use this image to replace the disk of 8 once I have the aligned partition (this image is now on the 4 GB drive), without messing up alignment - so no doubt I need to align the 4 GB drive as well.

    So, after all that waffle that I would be really happy is a walk of models by using Diskpar (if someone can point me to a working bind it to d/l 1!) -or Diskpart, which I think I can run from my recovery disc of Win7 (from my Dell laptop) - I know that I've seen people talk about running it from a Vista recovery disk, so guess it of the same tool and can help me to do the same job.

    I think I need to remove the volume (?) on the 8 GB, before I can do any alignment - then, as it is currently the only player with a job o/s on this subject, is it possible by booting from the recovery disc too?

    Just for the record the Tech Support Asus was desperate - also, their support for the "Eee" family forum have been down for weeks - then were not able to ask people who have probably all done on this machine!

    Thank you

    Jon

    Hello

    Unfortunately, this is not supported in computer ASUS; You should continue to contact ASUS for support.

    http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  • Windows Media Center didn't recognize Cisco/ATT Uverse Set top Box remote

    With Windows 7 Media Center throughout the TV Setup Wizard, everything works until the screen of the decoder.  Automatic set-top box set up does not work.  Through the screen to identify my decoder does not work.  There is not an option for Cisco (there are 361 other).  It seems that Cisco should be on this list.

    Using the function "learning" remote does not work either.  Media Centre telling me that it does not recognize the remote.

    There is information on the web about this, but I have not seen an emphatic solution.

    Thanks for your insight into this problem.

    Please visit this link

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/able-to-see-live-TV-in-Windows-Media-Center/06193a43-D267-4B34-8e9c-5248bc424473

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/att-cable-box-Cisco-MN-ipn4320-wont-work-with-WMC/bb6684bd-628c-4F63-be82-fb800e71f5bd

  • Need to align the two radio buttons in one line

    Hi all

    In my BlackBerry Application, I have a part of the user interface where I need to align two radio buttons in one line.

    I used the code to design the user interface, but the two radio buttons below are overlapping.

    SerializableAttribute public class BBSettingsScreen extends form {}

    Rbg RadioButtonGroup = new RadioButtonGroup();

    RadioButtonLayout raButtonLayout = new RadioButtonLayout();

    raButtonLayout.add (new RadioButtonField ("ONE", rbg, true, RadioButtonField.FIELD_RIGHT));
    raButtonLayout.add (new RadioButtonField ("TWO", rbg, false, RadioButtonField.FIELD_LEFT));

    Add (raButtonLayout);

    SerializableAttribute public class RadioButtonLayout extends Manager {}

    public RadioButtonLayout() {}
    Super(Manager.VERTICAL_SCROLL |) Manager.RIGHTMOST);
    }

    protected void sublayout (int width, int height) {}
    Field field;
    get the total number of areas falling under this Manager of
    int numberOfFields = getFieldCount();
    int x = 0;
    int y = 0;
    for (int i = 0; i)< numberoffields;i++)="">
    field = getField (i); get the field
    setPositionChild(field,x,y); set the position of the field

    layoutChild (field, width, height); Spread the field
    x += 30;
    }

    width = 70;
    height = 20;

    setExtent (width, height);
    }

    }

    }

    Please help on this...

    Thank you & best regards

    Chintada Ravikumar

    Try this:

    RadioButtonGroup rgb=new RadioButtonGroup();
    HorizontalFieldManager hr1=new HorizontalFieldManager(FIELD_HCENTER);
    RadioButtonField radioOne=new RadioButtonField(" RadioOne",rgb,true)
    {
        protected void layout(int width, int height)
        {
            super.layout(75,30);//Width and height according to the button name;
            setExtent(75,30);//width and height according to the button name;
        }
    };
    hr1.add(radioOne);
    RadioButtonField radioTwo=new RadioButtonField(" RadioTwo",rgb,false)
    {
        protected void layout(int width, int height)
        {
            super.layout(75,30);//Width and height according to the button name;
            setExtent(75,30);//Width and height according to the button name;
        }
    };
    radioTwo.setPadding(0, 0, 0, 20);
    hr1.add(other);
    add(hr1);
    
  • Driver for Motorola Set-Top Box QIP6416 to Windows 7

    I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

    Thank you

    I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

    Thank you

    Art

    You may be able to find the necessary help in the link provided below.

    http://www.Verizon.com/support/Residential/TV/fiostv/Receivers/User+guides/User+guides.htm#.

    Set up and install.

    http://www.Verizon.com/support/residential/TV/Setup.htm

    Quick Guide to Verizon

    http://www.Verizon.com/support/residential/QuickGuides/index.htm

    If you wait long enough on the installation and install the page, you will get a popup offering help via a chat.

  • Aligning input boxes?

    Simple question, how can I align input boxes so that they display the same width?

    That is to say (how it displays):

    [First name]
    Last name]
    Email: [                         ]

    That is to say (how I want to display):

    [First name]
    Last name]
    Email: [                    ]


    Also, is there a way to increase the font size on a panelBox? I can change the font size of the body, but not the title of the panelBox.

    Thank you.

    Hello

    You can place your 'example' in both

     tags. Both your examples look the same unformatted.
    
    Anyway, try placing them within a panelFormLayout and see if that is what you want. You can set the LabelWitdth and FieldWidth in it.
    
    Regards,
    Chan Kelwin                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
    
  • In the design of the text alignment jumps around, even when the value "align top".

    Hi all

    I worked in a pamphlet that someone else created, and I have a problem with the text boxes. No matter what I set the alignment (align the top, in this case), it jumps around whenever I move the text box. For example, I try to move the box to the top, and the text inside it moves down. I move the box to the top, "centered" the text becomes. In fact, when he arrives at the margin, he's going above it all. The text inside the box is located just to the right of the margin, even though the box itself moves upward. The principal is also greater than it should be. When I take the text box on the page completely and put it next to the document, the leader returns to normal and it is aligned to the top.

    Clues?

    Thank you
    Trina

    Your text is set to "Snap to grid".

  • Need new Lap Top Qosmio X 500-02 M

    Hi all, new to this forum so forward to reading some of your expert advice. Time to upgrade my laptop... again, I'm looking at the 500 X 02 Mr. I want better fastest lap top that I can get my hands on what I'm doing... is that it?

    * I will he use for the following: *

    Using the internet high speed, must be very fast to opening many pages and let me scan between all open websites with a fast refresh time.

    Discussions on the Forum, I speak on the forums a little and they take some time to refresh when I'm on 3-4 at a time, must be fast here.

    Photography and photoshop, I have downloaded the Adobe Lightroom 3 (when it is published) on the laptop. I'll also have a 500GB hard drive with pictures on this topic only. I expected import of external hd for photoshop. I don't want to wait all day to import and to work on pictures.

    I'll also watch DVD, including Blue Ray and I know the X 500 02 M supports this feature.

    I realize that this laptop is mainly for players, but will it also to meet my needs, I'm not a gamer so if there is something else out there, it's going to do the same job in Toshiba please let me know. I really care about this model well and I did a little research.

    I will also get the backpack of game and a few other odds and ends. Please recommend any additional extras that you think would be helpful.

    Cheers, look forward to answers...

    To be clear, Qosmio X 500 is better portable multimedia designed by Toshiba and if you buy it you will have a new and more powerful hardware peace.

    After reading what you wrote, I think that it is a good decision to buy this laptop Qosmio.
    For best performance, you need to optimize OS preinstalled. What does deletes everything preinstalled, you do not need, install your favorite applications, disable or unnecessary processes and services, make sure that unnecessary applications do not start with the OS. I think you know what I mean and you probably don't have this already before you start using the operating system.

    I don't know how it works in Australia, but here, in Europe, you can buy some products and test for two weeks. If you don't like it you can return it. If it is the same in your country, buy it, test it and make sure that you choose the right product.

    Please inform us of your experience with this multimedia toy.

  • vvista account user with "windows needs your permission" problem box missing

    Hello

    When I try to install a program downloaded via my standard username account I no longer get a pop-up box saying "user account control-windows needs your permission."

    There is nowhere to enter my administrator password.

    The download continues, and then fails with the message

    "Error".

    You must be logged in as the administrator during the installation of this program"

    I tried restore to earlier date and have run "sfc/scannow" to the account administrator cmd prompt, but nothing!

    Help please

    Teka

    Hello

    1. did you of recent changes on the computer?

    2. is the computer connected to the domain environment?

    3. are you able to install programs user administrator account?

    I suggest you to follow the steps and check.

    Try to run the installer from the program with administrator privileges and check if it works.

    (a) right click on the setup of the program

    (b) click on run as administrator

    (c) check if you can install the program.

    Also, make sure that you have connected the administrator account.

  • Align the boxes of the form

    I'm trying to align my form boxes so that they are more aligned virticaly, here is the code

    < form id = "form2" name = "form2" method = "post" action = "" >

    < p >

    < label for = "FirstName" > name < / label >

    < input name = "FirstName" type = "text" id = "first name" tabindex = "1" size = "35" / >

    < label = "lastname" class = "Marginleft30" > name < / label >

    < input name = "lastname" type = "text" id = "lastname" tabindex = "10" size = "35" / >

    < br / >

    < label for = "address" > address < / label >

    < name of entry = "address" type = "text" id = "address" tabindex = "20" size = "50" / >

    < /p >

    < / make >

    Any ideas? Thank you!

    I use

      for ordered lists
    1. as for my CSS hooks.

      http://ALT-Web.com/demos/CSS-form.shtml

      Nancy O.

Maybe you are looking for