Need to receive a disk for the USB external hard drive

Similar Questions

• I can't initialize the disk for my new external hard drive

  I can't initialize the disk for my new external hard drive because the drop-down list in the Disk Management Console does not give me this option. I'm logged in as an administrator and running Windows XP.  The driver for the new hardware is not digitally signed because I can't initialize the disk.  So I can't get my new hardware to run.  Does anyone have any ideas on how I can get the option "Initialize disk" in the Disk Management Console?

  Hello Honduras1,

  Can you simply right-click and format everything first?  The drive must be formatted before use, make sure that you format NTFS.

  See you soon

• Cannot open the USB external hard drive

  Original title: Hard drive

  I can't open the disk external hard usb and the device can see the list of devices and printer as 'USB to ATA/ATAPI Bridge '.

  Hello

  1. What is the exactly say by "device can see the list of devices and printer as"USB to ATA/ATAPI Bridge""?
  2. do you receive any error messages?
  3. did you of recent changes on the computer before this problem?
  4. were you able to open and use the external hard drive USB before?
  5. try to connect the external hard drive to a different USB port and check.
  6. are you able to access other USB devices with success?
  Method 1:
  I suggest you to run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   
  Method 2:
  If the problem persists, try to uninstall and reinstall the USB controllers and check.
   

  (a) click Start, type Device Manager in the start search box and press enter.

  Bus USB controllers b) Expand .

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllers and then click Uninstall to remove it.

  step d) precedes the repeat for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  You can check the link for more information:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, you can try to connect the hard drive to another computer and check.
   
  Let us know if it helps.

• Best practices to eliminate the USB external hard drives

  Hello

  I wonder what is the best way to disconnect an external hard drive to USB powered.

  The first thing to do is of course, use the "safely remove hardware and eject Media" next to the clock.

  But, after that do you unplug the power or USB cord first?

  The reason why I ask, is that I noticed the following error in the system event log:

  Log name: System
  Source: disk
  Date: 05/06/2013-08:27:46
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: SERVER.xyz.intranet
  Description:
  The driver has detected an error of the controller on \Device\Harddisk1\DR7.
  The event XML:
  
   
     
      11
      2
      0
      0 x 80000000000000
     
      215889
      System
      SERVER.xyz.intranet
     
   
   
      \Device\Harddisk1\DR7
      0E04800001000000000000000B0004C003010000000000000000000000082D00000000000000000057CFCF0100000000FFFFFFFF060000005800000000000000FF0006120C000010000000003C000000000000000000000000C2431080FAFFFF0000000000000000607A2D2180FAFFFF0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
   
  

  I have run chkdsk on the drive and everything seems fine.

  Thank you

  Hi Simon,.

  I suggest you to disconnect the power cord and then remove the USB cable.

  For more help with the ID:9 of the event, see the following link:
  How to troubleshoot the error messages about event ID 9 and event ID 11
  http://support.Microsoft.com/kb/314093
  Note: Suggestions in the article above also applies to Windows 7.

  If you have any other questions, answer here and we will be happy to help you.

• Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?

  Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?  My Macbook Pro does not start after that I upgraded to mac os 10.6.8 Lion and I have a bootable backup just before the upgrade.

  OS X: on OS X Recovery - Apple Support

• Satellite 1800-712 does not recognize my USB external HARD drive

  Hello

  I would really appreciate the help. I own a satellite 1800-712. I have receently bought a usb external hard drive for some extra memory (IE Toshiba MK4026GAX USB Device)

  When I connect it to my usb port it records any with the computer. The green light so there is power to the hard drive. The usb ports recognized of other fine features (a modem and memory stick)

  I tried the external hard drive on a desktop pc and it works fine.

  I have downloaded all windows xp service pack updates and updated my bios. Don't know what to do now.

  Please help and thank you in advance!

  Hello

  Although sometimes, I know that the OS is not able to recognize the external USB device, because the device external USB (HDD) consumes more energy than the 500mA.
  The USB ports provide 500mA power and if the device needs more power so it s is not possible for the Windows operating system to recognize the external device.
  You have an external power supply for the USB HDD? You should use it.

  Good bye

• Computer laptop (Vista) does not take account any new working USB external hard drive

  Hello, I'm under the latest version of Windows Vista Edition Home Premium on a Dell XPS M1210 and spin in the problems with the connection of my second USB external hard drive. In other words, when I plug the drive (a Seagate expansion 1 TB), nothing happens. Literally nothing, no notification of installation of the driver, no sound is played stating that the system recognized the device, no new entry in post working or disk management. I connected this drive on another computer running Windows 7 and it worked without a problem, so I do not suspect the problem to lie in the hard drive, but with my computer. My other external hard drive USB, a Maxtor Basics Portable 250 GB, works perfectly, but there more than two years. I bought the 1 TB Seagate as a backup and an upgrade, but I plan to go back now that there is nothing more than a big black Clipboard with a green LED clear too much room. What can I do about it?

  Hello
   
  Most likely, there is not enough power for the USB port of your machine to the external device do recognize. As a test I would have you test the issue on another USB plug.
   
  I recommend you contact you either OEM (Original Equipment Manufacturer) or the manufacturer of the motherboard if it is a machine of casting House and get the latest chipset drivers for your motherboard.
   
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• 250 GB USB external hard drive is compatible with Mac OS x on an iBook G4?

  Hello

  I just bought a Toshiba 250 GB Usb external hard drive because the seller advised me telling me that it works in my iBook G4 Mac OSX computer.

  I made it and I see it on my desktop with a folder called System Volume Information and 2.32 GB available.

  I tried to copy a file and I got a message saying that the disk is not editable.

  Where can I find the instructions to initialize if it's compatible?

  Thanks in advance,

  Joan

  Post edited by: jinglada

  Post edited by: jinglada

  Hello

  I'm not sure on this subject, but maybe you have to format it.
  Are there issues listed in the Device Manager?

  Good bye

• Seagate FreeAgent GoFlex USB external hard drive problem

  I have a Seagate USB external hard drive. It is loaded with all my pictures and music. I can not open. I did in the past without problem.  It is a Seagate FreeAgent GoFlex. It says that I have the drivers updated. I've started and restarted. uninstalled and installed etc. It's also almost if there is nothing on the disc. When I plug it into the USB port it will not appear in the my computer tab, however, it shows in the toolbar at the bottom as installed but with nothing on it. When I run the troubleshooter, it says that the problem can not be detected, but it also says that the device is functioning properly. I do not know because I can not the specifics to fill. Y at - it somewhere that I can take this drive to see if someone can see if my files are always about this and that so they can transfer to another drive? Help, please!

  [Moved from comments]

  Hi Philippe,.

  Welcome to the Microsoft Community and thank you for the post about it

  It seems that when you connect an external hard drive Seagate USB to your computer, there is no indication in the drive. I appreciate the action that you tried to solve the problem.

  I would like to know the following information.

  (1) what version of Windows is currently installed on your computer?
  (2) have you tried to connect the hard drive to other USB ports?
  (3) you are able to use other USB devices?

  I suggest you to connect the hard drive to another computer and check.

  Your answers are important to us, please write to us with the requested information so that we can help more.

• Response speed - USB external hard drive

  Hello

  I have W7 Professional (32 bit) installed on an Acer Ferrari 5000 with 4 GB of RAM. I have a 1 TB WD My Book USB external hard drive connected via USB.

  When I access the drive to play an Explorer of W7 film shows my folder & first screen load files instantly, but then the green progress under the full path bar direcory slowly starts to move across the screen and may take up to 3 minutes to stop. Durning his time my pc performace Marc everything stop. The video load but Windows Media Watch does not respond and the hourglass (or a circle in W7) shows the application as it is busy. Finally, video begins to play but jumps several images at once, even if the sound is fine. After about a minute the video started playing at double speed, befire the entire process repeats itself until it catches up with the sound and the video will play very well for about 10 minutes.

  Videos are not damaged (I can play my portable hard drive very well), the device signals healthy in the WD diagnostic tool and the firmare for the device is up to date (on the WD site).

  I see a lot of people in this forum have problems with W7 64 bit, but there is no mention of 32-bit issues. Also there never was problems with the device was detected or is not accessible - gal just access the device. My only job is about from the drive to copy the movie on my laptop and play it from there - which kind of defeated the purpose.

  I left a similar post on the WD website, which so far had no response. Is it a question of W7/USB? Any other ideas would be useful.

  Hello

  I have W7 Professional (32 bit) installed on an Acer Ferrari 5000 with 4 GB of RAM. I have a 1 TB WD My Book USB external hard drive connected via USB.

  When I access the drive to play an Explorer of W7 film shows my folder & first screen load files instantly, but then the green progress under the full path bar direcory slowly starts to move across the screen and may take up to 3 minutes to stop. Durning his time my pc performace Marc everything stop. The video load but Windows Media Watch does not respond and the hourglass (or a circle in W7) shows the application as it is busy. Finally, video begins to play but jumps several images at once, even if the sound is fine. After about a minute the video started playing at double speed, befire the entire process repeats itself until it catches up with the sound and the video will play very well for about 10 minutes.

  Videos are not damaged (I can play my portable hard drive very well), the device signals healthy in the WD diagnostic tool and the firmare for the device is up to date (on the WD site).

  I see a lot of people in this forum have problems with W7 64 bit, but there is no mention of 32-bit issues. Also there never was problems with the device was detected or is not accessible - gal just access the device. My only job is about from the drive to copy the movie on my laptop and play it from there - which kind of defeated the purpose.

  I left a similar post on the WD website, which so far had no response. Is it a question of W7/USB? Any other ideas would be useful.

  Speed on USB hard drives is relatively slow at first. You are looking at maximum read anywhere between 25 and 32MBs speed if the CPU is not do much else at the time. Supported playback mode tend to transfer bog down over time, as the fragmentation of the file. USB is convenient but firewire and eSATA are faster and faster.

• HP Pavilion 15 laptop: Need help, PC laptop HP Pavilion 15 could not boot from USB external hard drive.

  My desktop HP Pavilion P7-1074 4.5 years computer dropped last week. Planed to get a replacement on Black Friday or the day after Christmas. But I have to run some programs inside hard drve to the desktop computer. So I have attatched hard disk dive from my desktop to my laptop HP Pavilion 15 USB port with an enclosure.

  The laptop would recognize the external hard drive as a SYSTEM (F 62.2 MB of free space of 97.9 MB, OS (GTB-free 1.11 of 1.35 TB and HP_RECOVERY (H 1.33 GB free of 11.0 GB.))) But I couldn't find the program I want to run.

  I went into the BIOS to set the boot order to boot from USB first, but I could not get the result I expected. The laptop still start on its own hard drive. I tried all three USB ports, no one works.

  Could someone help me please?

  Thank you very much!

  Hi @db69613,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need assistance with your desktop computer HARD drive that is connected to your laptop via the USB port. I'll be happy to help you with this.

  I'm just surprised at the levels of technical knowledge and technical skills that your possession. Hats off to you for this. It was very clever of you! It has been a privilege to have shared this platform with you and work with you.

  First of all, programs of a different version or windows session will not work on another computer as it was installed on the computer of origin at this time. It is an installation and application software, to the difference of the data or information that is accessible by any computer when the hard drive is connected. It is because no software installation binds the application of this specific operating system installed on this specific to the time machine.

  If the computer does not and the hard drive is accessible, all the content (such as music, photos, videos, and other information are accessible), but the programs have been installed originally are not available and will not work on any other computer when it is connected to the outside.

  However, if the hard drive works fine, windows is correctly installed, then the same hard disk can be installed on another PC of office and some of the programs should work ideally.

  I hope this helps! Please let me know how it goes. I really hope that the issue is fixed without hassle.

  To simply say thank you, please click the "Thumbs Up" button for appreciate my efforts. If it helps, please mark this as "'Solution Accepted". " If you need more assistance let me know and I will gladly do whatever I can to help.

  Please take care now and have a wonderful week ahead.

• SMART Disk FireLite 80 GB external hard drive USB drivers

  My computer does not recognize my drive external hard disk smart firelite 80 GB usb at all...

  Plug in there and nothing, the blue light is on the disk. But when I check in 'MY COMPUTER' just shows how many slots usb ate open, but nothing else...

  This drive worked at one point but now?

  Thanks for any help

  George

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. that you get an error message while you connect the external hard drive?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to connect the hard drive to a different USB port or try to connect the hard drive in another computer and check that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: If the previous step fails, check if the hard drive is detected in disk management.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

   

  Method 4: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive

  Hi all

  I have a Satellite L70-A-139 youcef.
  And at the back of the laptop, there is a cover that is fixed with a screw.

  Wil I void the warranty when I unscrew and take a look?
  I want to upgrade my HDD to SSD.
  The motherboard supports Sata III: D.

  Thank you!

  No, the mandate must still be valid.
  There is a removable cover at the bottom of the unit as shown here:
  [Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]

  Then you should be able to upgrade the RAM and HARD drive.
  I think this info should be mentioned in the user manual too.

• Using the HARD drive of a Tecra A4 as a for another laptop external HARD drive.

  I have a Toshiba Tecra A4. I want to use the HARD drive as a second hard drive to another laptop, but it seemed to me that the HDD in Tecra A4 has a special bond that does not fit in a standard externel HDD-Bay. Anyone know how I can use the HARD Tecra A4 drive as an external HARD drive?

  Subquestion: is it not possible to use a 2.5 "HARD drive normal in a Toshiba Tecra A4?

  Hello

  AFAIK Tecra A4 has 2.5 inch HDD inside. But the HARD drive has another connector HARD drive that you can remove. The HARD drive is placed in the HARD drive chassis and fixed with four screws. Remove the screw and the connector. Be very carefully and take it easy.

  After that you can use in other laptops.

• USB external hard drive stopped working

  I use Vista Home Basic Edition on a Dell Inspiron 1525.  I use a WD external hard drive for storage (almost a year) and it has been fine until today.  All of a sudden he disappeared.  At microsoft I used the fix tool and it said: relocation that the driver can solve - I say yes - device driver comes up saying installed successfully - but the disc puts to work continuously until I have unplug the USB or turn off.  Then everything went again.  I tried a dozen times, but it's always the same.  The only new thing that was installed today was a color laser printer & I don't see why that would stop the hd.  Any help or thoughts would be greatly appreciated as I need my data!

  Hello KBS406,

  Have you tried using a different USB Port? It maybe your H.D. must be assigned a letter given that your printer may have replaced it, itself when you install.     How to change a drive letter: to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)