need to reconnect my wireless network connection

Similar Questions

• Wireless network connection problem

  Nice day

  I have a wireless network connection problem and I ask for help to resolve.
  What surprises me that this problem appeared suddenly, I used to connect to the WIFI correctly but two days ago my laptop could not connect to the WIFI and more.

  Other devices and computers connect with success so I think that the problem in my laptop.
  I don't have any changes on my laptop or windows, antivirus, drivers... updates or installed new software.
  Troubleshooting of Windows detected 'router or access point issues '.
  -Reset the router does not resolve the problem
  -Network adapter is enabled.
  -State of wireless card "working properly" and "update".

  I read a solution on this site, which was to change the properties of the wireless adapter, but the changes mentioned does not appear in the pilot of my laptop...

  * My laptop info. :
  DELL INSPIRON 3521
  Windows 7-64 bit
  Dell WIreless 1703 802.11b/g/n(5.2GHz)

  Sorry for this long to make, I appreciated all the help.
  Thanks in advance.

  Hello

  Have you tried to reset your laptop to a time before this issue started with a Windows 7 Restore Point?  If it is a parameter change or software this restore point can help solve what is at the origin of the problem.

  I'd also, of course, when you are resetting the router, to make sure that you let it sit for at least 30 seconds to a minute before plugging power back in.  You may need to do a few times to clear his memory to be able to connect.

  In addition, have updated the drivers for the wireless card?  What version of driver currently installed in the system?  You can consult our support site, enter your serial number and click on drivers & Downloads to find the driver for your wireless card.

  Finally, have you tried to empty the wireless profiles that are currently stored in your system?   If you delete the profile current wireless (which is to control your connection to the router), reboot your system, and try to reconnect Windows will rebuild the profile and hopefully allow you to log in again.

  I would like to know if any of this helps.  To help resolve this more effectively please click on my user name Dell Todd and send me a private message with the Number of Dell Service from your system.  Please keep all troubleshooting and discussions on this thread open so that others can find the information they need to solve their problems.

  Todd

• Wireless network connection

  I am an employee of Life Insurance Corporation of India.When I turn on my PC in the office premises, a connection named "dlink" appears in my PC. After the connection (without using any modem or external device) I can browse the internet. How is that possible? The brief description of the connection is the following:

  Wireless network connection

  Connectivity: Internet IPv4

  Name: dlink

  Strength: good signal/fair/poor

  Security type: unsecured

  Radio type: 802.11n

  SSID:Dlink

  Should I access the internet by connecting through this link? Y at - it all threat to the security of my personal information or whether it's bad for me. Please notify. The link also shows a message that "the information transmitted by means of this link can be visible to others". Please specify.

  Hi SANJIT_78,

  ·         The computer is connected to a domain environment?

  ·         Are you facing any performance issue with wireless network connection?

  ·         What operating system is installed on the computer?

  The computer you are using apparently have a wireless network interface installed in it and therefore can detect and connect to any available wireless network. The dlink network is the name of a wireless network available in your area and your computer to connect to this wireless network.

  Wireless networks more private need a password to connect to them and therefore are protected. But the dlink network to which you are connecting is apparently a public wireless network, and it doesn't have a password to connect to it. So which allows any user to connect their devices to this network wireless. Due to this insecure wireless network mode, your computer displays you the message "the information transmitted through this link may be visible to others". If you want to connect to this wireless network, I suggest you first protect your computer with a good program antivirus and firewall.

  To enable the Windows Firewall on your computer, you can check this link:

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  http://support.Microsoft.com/kb/283673

  Hope this information helps.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• An error occurred while renewing interface wireless network connection: unable to contact your DHCP server. Request a expires.

  I use an Acer Asspire One with Windows XP. We have wireless through AT & T Uverse. The netbook has an Atheros AR5007EG Ethernet card.

  A number of things have taken place lately: I had not used the Acer for some time and the battery was dead and would not recharge. I could book until when it was plugged, but could not get on the Internet. I found online that the solution to the battery problem was to download a new bios that worked wonderfully and it is now loaded. Recently, our AT & T router died and was replaced. I put the new WEP keys in two other computers, and they connect to the Internet. I can't connect to the Internet with the Acer. I tried ipconfig / renew and get the error message: "an error occurred during renewal of the wireless network connection interface: unable to contact your DHCP server.» Request a expires. No operation can be performed on Local area connection while it has its media disconnected. "On the tab"Choose a wireless network", it shows my network and said"absorbing the network address"but nothing happens. When I do ipconfig I see that there is no IP address.
  I took the computer to Starbucks this morning, ran ipconfig / renew and she acquired the IP address and I was able to connect to the Internet. I brought the computer home and tried and failed to connect. The IP address is back to 0.0.0.0 and the error message appears when I try to renew it.
  I hesitate to make a lot of changes since it was working with a different network.
  Original title: IP address is missing
  These forums are wonderful. I tell myself that I've saved the cost of a new battery using the bios, I found on a forum!

  Hello

  DHCP - Dynamic Host Configuration Protocol is a protocol used by devices computer network (DHCP clients) that dynamically distributes the IP address of the destination host. Now the error indicates that your computer is not able to communicate with the server and assign the IP address.

  Method 1:

  Let us try to disable the firewall and check the issue.

  Note: Re-enable the firewall after checking the issue.

  Check whether the problem is resolved.

  Method 2:

  If the issue is not resolved, you can follow the steps from the link provided and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Hope this helps and let us know if you need more assistance.

• Yellow triangle with! the wireless network connection in the task bar icon, but ok in Device Manager

  I still need help: 11-24-10' uncorrected problem after all

  I have a laptop of refurbished HP older Pavilion ze5385US who has recently lost the wireless connection.  Now, I have to leave it plugged in to use, not practical at all.  I did the right click on the icon to open the network connections, left clicked wireless network connections and then clicked "repair this connection.  The uninstaslled of the computer, and then was not able to reinstall.  When I checked D, it was empty.  I thought it was where restoration stuff should have been.  So I downloaded and reinstalled much Express IEEE 802.11 PCI card Lan, until I found the one that the computer would be except.  Now, it appears in device very good Manager, but has theyellow cone with! on the icon in the status bar at the bottom.  When I raised it lights, it is said: 13 of (ANY) wireless network connection, speed: 11.0 Mbps, Signal strength: Excellent, status: limited or no connectivity.  When I choose "View available wireless networks", I get "Windows cannot configure this wireless connection.  Under network without wire/support/details of connections, Iget physical address: 00-02-8A-92-BE-0C, IP address: 169.254.196.112 subnet mask: 255.255.0.0, then the default gateway, DNS server, WINS server & have not enumerated values. I'm afraid to hit the repair again, it could wipe out the only map I've found so far that is accepted by my computer.  When I try to enter the knowledge base for WinXP, I get an error for this page, as well as several other help pages I tried the site of microsoft.com for help.  When I used configurationtool thewireless zero in respect of services & restart earlier, I had a red X on my icon, so I guess I've lost my card after all.  Can I disable this?  The map always shows as OK in Device Manager.  Any ideas anyone?  I need help here please.

  Hello

  I thank you and wish you the same.

  I see that your problem has been solved using the HP driver that you mentioned on Thursday, November 18 in your message and the Express.sys is a problem with Windows install.

  I suggest to install the version of Windows install 4.5 on the system from the link below and then update the driver from the link that was attached to your question before and check.

   

  Step 1:

  Install windows install 4.5

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2:

  Update the driver from the link you mentioned in your previous post.

  I suggest you to check with TP-link if this model is compatible with Windows XP or not.

  http://www.TP-link.com/products/ProductList.asp?class=WLAN#S6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Get rid of the current wireless network connection so that I can set up a new connection using the same IP address.

  Here's my problem: I got a new computer and a wireless network connection has been set up and I could get on the internet. My daughter then wanted to try her new computer and somehow his computer is defined as the network and I can no longer connect to the internet via my computer.

  The second part of my problem is that when I try to configure my computer, I get the message that I need to go to the Micro knowledge base and article 871122.
  I did it.  By following the instructions for Windows configure my wireless, I get as far as the stage of network connections - go to change the settings for this network connection.  It is said that I had to go to the wireless network tab.  There is no tab wireless network I can say to use Windows to configure my network connections...

  I know it is long, but can someone help.  I use Windows XP Prof 2002 with service pack 3 version. Thank you adpotate

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I lose the internet connection randomly but never lose my wireless network connection.

  I use a hp pavilion dv9500 with 64-bit vista sp2 and built in a wireless adapter that will fall randomly my internet wireless connection, but maintains my wireless network connection with an excellent signal strength.

  My (non-permanent) fixed
  I know how to reconnect to the internet, but it forces me to diagnose a repair my connection. It then displays "cannot connect to Server primary dns (75.75.75.75)"after which it gives "things to try" who never work and a button 'Reset the ip address' that I click. " repair bar will fill up to half way and go to a new screen solution that shows more 'solutions' and a "reset wireless adapter" button which I click. the remedy bar will fill and then display windows can not solve the problem and go for help. I then manually disconnect from the wireless network and my computer will automatically reconnect to the network and to the internet. It takes about five minutes to fix, but it happens so often that it is getting boring. The process will not work if I only to reset the ip address and then disconnect from the network, only to reset the wireless adapter and then disconnect, or just disconnect from the network and reconnect. I have to reset the ip address and the wireless adapter and then disconnect from the network.

  The internet connection will tend to disconnect when I watch a lot of youtube videos, when I download large files like a game on steam, or just just randomly when I use it. I'll use it for a long time and he can't let it go, but sometimes it will go down to ten minutes after I had just reconnected in a drop-down list. It happens randomly without another warning that download time will increase from 2 mb to 50 k in two seconds all about or stop the loading of a youtube video when I look at it.

  I searched everywhere for an answer, but it's as if it were a new problem for all humanity or just im the only person who does not know how to solve this problem, because there are no forums or FAQ not related to my problem. It is not so much a serious problem such as an irritating problem that appears at inconvenient times or when I just want to relax and watch a video. It takes some time to reconnect and even though I know how it would be better if my connection would just stay connected to the internet at any time.

  I have no idea what the problem could be that whenever I have find I never get related problems. all advice or solution would be great.

  I also share this modem with other three commonly used computers: a wired office and two other laptops that the two are connected wirelessly. both other laptops do not have the same problem as mine. My router is a linksys e3000 wireless router.

  Hi DustinMoor3,

  Follow the troubleshooting steps posted by Shekhar (marked as the answer) in this thread to solve the problem with no connection to the primary DNS server, in particular the method 2 worked for other users.

  * These steps should also work for Vista *.

• Several networks presents in wireless network connection

  Original title: why is network-0033, livedoor-web, mobilepoint were added to my network in my wireless network connection without that I know? Can I delete it?

  Why is network-0033, livedoor-web, mobilepoint were added to my network in my wireless network connection I don't know? Miccrosoft download it or Skype did? Can I delete it?

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  Whenever you turn on your Wi - Fi, it shows the different profiles, you can connect to. If you connect to a profile once again, these profiles might get accumulated in the framework of your wireless connection.

  If you do not want some profiles, you can delete these profiles.

  Follow the steps to remove these profiles.

  1. Start network and sharing Center.

  2. In the pane tasks , click manage wireless networks.

  3. Right click on the connection you want to remove and then click remove network.

  4. In the dialog manage wireless - WARNING networks , click OK.

     The connection is removed from the list of wireless connections that you can view or edit.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Deleting listed wireless network connection...

  How to remove a wireless network connection listed in the Open Network and Sharing Center so that it is no longer an option to choose?

  See - http://technet.microsoft.com/en-us/library/gg252588(v=ws.10).aspx

  I hope that this is the info that you need.

• Wireless network connection problems

  I have problems to stay connected to my wireless router.  There are 3 laptops and 2 workstations connected, but my laptop does not seem to disconnect every time my computer sleeps or is closed.  I have to go through this process to solve the problem in which the connection is immediately restored, but then disconnected and connected once again. I tried to remove the connection & restores and troubleshooting with the router, but nothing seems to solve the problem. Other computers never have this problem.  My laptop is fairly new, and I'm quite puzzled as to why he's in trouble.

  Hello

  To provide the proper resolution, I would need more information on your side.

  What is the number and the model of the laptop?

  Windows can be disable your network adapter to save power. You can try to disable the power saving option in the network adapter properties

  I suggest you try the steps to disable power saving option. Check if it helps.

  a. open network connections by clicking the Start button, and then clicking Control Panel.

  (b) in the Search box, type adapterand then, under network and sharing Center, click on view network connections.

  c. right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click the Networking taband then click on configures.

  e. click on the power management , clear the checkbox allow the computer to turn off this device to save power tab and then click on OK.

  See the article for more information.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Equium A60 - no wireless network connection

  Hello world

  I have had a good look through the forums and can't find anything related to this but my apologies if this has been addressed elsewhere :-)

  I set up a wireless home network with a Windows XP desktop computer with a router and a laptop old Win98, WinXP SP2, which I can't connect and an Equium A60. I installed two different network on the A60 USB adapters, seems to be okay with all of them except that there is no "wireless network connection" listed under network connections Control Panel. Both cards work fine on two other machines, so there must be a problem with the A60. I installed an adapter and then uninstalled before trying another.

  Under control-> connections Panel Network, I can see an old broadband connection and the connection to the Local network (which is allowing me to connect to the router via Ethernet, so that the router will work), but the wireless network connection icon is not there. The driver for the USB adapter makes its appearance in Device Manager and is reported as working properly, but if it worked correctly then (I think) a wireless connection icon should appear - it happened with my other WinXP desktop.

  Any ideas of what could be the cause?

  Thanks in advance
  Gareth

  Post edited by: g_shaw - added a few details

  Hello

  I guess that the external WLan USB stick has been recognized one installed correctly. You said it appears in Device Manager. Are you sure that the WLAN USB key has been recognized to 101%? !!

  If the WLAN USB key is recognized correctly, check the properties of this stick. (I think you should right click and then click on properties).

  But if the stick was not recognized, you must verify the properties of the single USB ports and power safe mode.
  Choose the USB single root hubs in device, right click, properties, tab power management Manager and disable the option called allow the computer to turn off the device to save energy.

  So maybe it helps

• "Wireless network connection" is not a valid IP configuration. "

  When I try to connect to the internet via a wireless connector I can but it takes anywhere from 10 to 20 minutes and many attempts that all generate the message title above.  but then it finally works.  It works great once its connected but the same connection problem happens the next time that I try to connect.  I don't know much about the technical problems for all responses must be in pretty easy to understand the jargon and thanks :)

  Hi Richard,

  Welcome to the Microsoft community.

  According to the description, resembles the internet connection is slow.

  What operating system you have installed in the computer?

  I suggest you click on the links and follow the instructions to resolve this problem:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please post back with more details so that we can help you better.

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• Wireless network connection does not

  I can't access a wireless connection with my computer wireless network connection. The icon in the bottom right of the screen shows a red X and says 'not connected wireless network connection. The wireless on my keyboard button does not illuminate

  I tried to change the channel on the new ADSL2 wireless router and refreshed looking for wireless connections, but still not found connections. I have not used a wireless router before and never used a wireless connection with this computer so I don't know if the wireless card works or not, if the properties of the wireless adapter indicate that it works. Is there a way to check if the computer's wireless card is running or connected and if not, how can it be connected? Thank you

  I finally understood by trial and error, why I was unable to connect wireless to a modem, that you sent me. In my control panel, I found that the properties of HP Wireless Assistant had "Hide status icon" checked, so I checked it and the icon came in the bottom right of my screen. I left then clicked that icon and it showed the wireless and bluetooth was OFF so I went in and it now works.

  Why HP support could not help me in what I don't know, I just got the race!

  Hope this helps others with similar problems.